14.97 – 80.01 Range
- The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels and sling studs (neither provided).A standard sling stud and sling stud spacer or two button head machine screws can be used as a fastener. NO HARDWARE INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks. Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.Weight: 1.20 ounces
- The BT15 - 3.35" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 1.76 – 2.78" and a relieved back to accommodate curved surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels and sling studs (neither provided).A standard sling stud and sling stud spacer can be used as one fastener or two button head machine screws can be used. NO HARDWARE INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks. Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.Weight: 0.92 ounces
- The BT70 Atlas M-LOK® Adapter is an interface between all Atlas bipods with the “NC” designator in their names (BT10-NC, BT46-NC, BT47-NC, BT35-NC, BT65-NC, BT69-NC, BT72-NC) and M-LOK style mounting systems. It requires two (2) M-LOK standard sized slots for mounting.Machined from 6061-T6 aluminum and Type III hard coat anodized and comes with two 3/8 fasteners and two M-LOK nuts. Available in black only.
- Length: 3.15"
- Width: 1.11"
- Weight: 1.1 oz
For an M-LOK to Picatinny rail attachment, check out our BT73: M-LOK® Rail - The BT74 Atlas Raider Cleat Feet are turned from 303 Stainless Steel bar stock in one piece for strength and durability. They will fit V8, PSR and CAL series of Atlas Bipods. They will also fit bipods/adapters that use Atlas feet. Easily installed with the press of a stainless steel plunger.The Cleat portion is approximately 1.000” long with the largest outer diameter of approximately 1.155”. Sold as a pair. Available in raw stainless steel only.NSN 1005-01-700-6502Total Weight of Pair: 2.6 ouncesProduct will work on V8, PSR and CAL models only.
- The BT81 Lil’ Brandi is our long awaited answer to getting a 1913 Picatinny Rail mounted on a traditional rifle stock without taking the rifle apart, drilling holes or damaging the stock. Installation utilizes the existing sling stud and provided cross pin, set screw and hex wrench.It features 3 usable slots for attaching any rail mounted Atlas Bipod and a sling attachment to utilize a sling if desired. The angular wings with rubber pads contact the stock. Machined to Picatinny rail standards from 7075-T6 aluminum with Mil-Spec Type III Class 2 finish. No disassembly required. Patent Pending.Not intended for use with flat stocks (reference fourth and fifth image). If the stock has two sling studs, we strongly recommend using our BT15 or BT17
- Dimensions: 1.95 x 1.5 x 0.663 in
- Weight: 0.89 ounces
- The BT34 - 2.05" 1913 Picatinny Rail has a center to center spacing of 1.6". Two machine screws can be used not included, see BT1517) to attach this rail to the forearm of standard rifle stocks. It can also be attached to a horizontal surface on the Butt section to attach our Precision Rail Monopods.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. NO HARDWARE INCLUDED. Available in black only.Weight: 0.4 ounces
- The BT32 Atlas Standard Rubber Feet are standard equipment on all V8, PSR or CAL series Atlas Bipods. They will also fit bipods/adapters that use Atlas feet. Easily installed with the press of a stainless steel plunger. Sold as a pair. Available in black only.Weight: 1.0 ounce
- "Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction. If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure. Introducing the ARCALOCK Dovetail Rail System." - Area 419The ARCALOCK Clamp works on all standard ARCA/1.5" dovetail rails. It will bolt directly to any "NC" (No Clamp) style of Atlas Bipods (except the 5-H which requires Extension Spigot for compatibility). Compatible Atlas Bipod models listed below.It will also bolt directly to our BT20-B Bottom Picatinny Rail and BT56LD 1/4-20 Lever Adapter.The ARCALOCK Clamp features a proprietary two-stage screw design. Both the Clamp and Knob are machined from 6061-T6 Aluminum with Type III Hardcoat black anodized Clamp and Knob. The screw is turned from 303 stainless steel.This clamp is manufactured by Area 419 NOT by B&T Industries L.L.C. All warranty issues are to be processed through Area 419. NO HARDWARE INCLUDED.
- Weight: 2.5 oz
- The BT28 AFAR Rail Kit will mount into accessory rails and provide a low profile 1913 Picitinny rail for attaching the Atlas Bipods or other accessories. This is a great option for shooters that have accessory rails and want to use their rail mounted Atlas on several rifles.The uniquely designed rectangle nuts (BT28-N) fit both Freeland and Anschutz style rails by rotating them 90°.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish with 4041 Alloy Steel fasteners. Includes two rectangle nuts, two (2) 10-32 x 3/8" flat head socket cap screws and two (2) 10-32 x 1/2" flat head socket cap screws. Available in black only.
- Length: 2.05"
- Weight: 0.89 ounces
- The BT22 Atlas Leg Extensions are easily installed to any V8, PSR or CAL series Atlas Bipod with the press of a stainless steel plunger. They provide an additional 3 inches of elevation and accept any of our optional V8, PSR or CAL feet. They will also fit bipods/adapters that use Atlas feet. Sold as a pair. Available in black only. NSN 1005-01-641-0369Total Weight of Pair: 1.8 ounces
Product will work on V8, PSR and CAL models only.
- The BT73 M-LOK® Rail is designed for use with all M-LOK compatible hand guards, forends and buttstocks. It has 3 usable slots for attaching any of our 1913 Picatinny rail mounted Atlas Bipods, Accu-Shot Monopods or Folding Foregrip. It requires standard M-LOK sized slots for mounting.Machined from 6061-T6 aluminum and Type III hard coat anodized. It comes with two 10-24 x 3/8 fasteners and two M-LOK nuts. Available in black only.
- Length: 1.575"
- Width: 0.835"
- Weight: 0.59 oz
For a direct M-LOK to "NC" (No Clamp) Atlas Bipod interface, check out our BT70: Atlas M-LOK® Adapter - The ADM-170-S base is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems. It has two hole pattern of 1.100”.This lever is manufactured by American Defense MFG, LLC NOT by B&T Industries, LLC and is used on our V8, PSR, CAL and Super CAL models of Atlas Bipods. All warranty issues are to be processed through American Defense MFG, LLCWeight: 1.905 ounces
- The BT80 M-LOK® Flush Cup Rail is designed for use with all M-LOK® compatible hand guards, forends and buttstocks. It has 5 usable slots and a flush cup allowing the use of Flush Cup sling swivels and sling studs (neither provided). The BT80 can be used to attach any of our 1913 Picatinny rail mounted Atlas Bipods, Accu-Shot Monopods or Folding Foregrip. It requires standard M-LOK® sized slots for mounting.Machined from 6061-T6 aluminum and Type III hard coat anodized. It comes with two 10-24 x 3/8 fasteners and two M-LOK® nuts. Available in black only.
- Length: 2.875"
- Center-to-center: 1.575"
- Width: 0.835"
- Weight: 1.038 oz
- The BT20-B Atlas Accuracy International Spigot Bottom Rail is the same rail found in the BT20, but consists of the bottom 1913 rail ONLY. It attaches to the bottom of the BT19 AAIS via blind threaded 10/32 holes and has a two hole pattern of 1.100" (see third image).To utilize the quick detach lever on our “LW17” style of Atlas Bipods OR the 2-screw mount style of Atlas Bipods, it is compatible with the following:• Any ARCA clamp with a matching hole pattern. We offer Area 419's ARCALOCK Clamp separately OR together as a complete unit: BT20-B/ARCALOCK Clamp (see fourth image)• Any Picatinny clamp with matching hole pattern. We offer American Defense's ADM-170-S separately OR together as a complete unit: BT43 Leveraged Rail (see fifth image)• Arisaka's Picatinny Rail SliderMachined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only. NO HARDWARE INCLUDED. 10-32 x 3/8" Flathead Socket Screws available separately.
- Length: 1.60"
- Weight: 0.57 ounces
- "Experience the blend of reliability and lightness with the BTC-Pro clamp. This screw knob clamp offers precise control, ensuring secure attachment of your equipment while shedding unnecessary weight. For photographers and outdoor enthusiasts seeking the optimal balance between strength and portability, the BTC-Pro is your ultimate companion. No compromise on durability, no added burden - that's the BTC-Pro promise." - Really Right Stuff SOAR DivisionThe BTC-Pro Bipod Clamp's Dual Combination Jaw allows for the attachment to either a Picatinny Rail or RRS 1.5" Dovetail Standard. It will bolt directly to any “NC” (No Clamp) style of Atlas Bipods (except the 5-H which requires Extension Spigot for compatibility) using provided hardware. Compatible Atlas Bipod models listed below.It will also bolt directly to our BT56LD 1/4-20 Lever Adapter.The BTC-Pro Bipod Clamp is CNC machined from 6061-T651 aluminum. Includes two (2) 10-32 x 3/8 flat-head screws and (1) 1/8" hex-key. Made in the USA.This clamp is manufactured by Really Right Stuff, SOAR Division NOT by B&T Industries, LLC. All warranty issues are to be processed through Really Right Stuff.
- The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL series Atlas Bipod with the press of a stainless steel plunger. They will lay flat in the 90 degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod. They will also fit bipods/adapters that use Atlas feet. Sold as a pair. Available in black only. NSN 1005-01-640-8881Total Weight of Pair: 1.5 ounces
Product will work on V8, PSR and CAL models only.
- The BT49 - 2.05" 1913 Adjustable Picatinny Rail has a center-to-center spacing of 1.2 - 1.6". Two machine screws can be used (not included, see BT1517) to attach this rail to the forearm of standard rifle stocks. Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish.The BT49 can also be attached to a horizontal surface on the Butt section to attach our Precision Rail Monopods. NO HARDWARE INCLUDED. Available in black only.
- Length: 2.05"
- Weight: 0.4 ounces
- The BT19 Atlas Accuracy International Spigot (AAIS) is designed for use with any NC (No Clamp) style Atlas Bipod that mounts directly to the AAIS which plugs into the Accuracy International AI/AICS stocks utilizing the factory retention/release mechanism.The evolution of long range shooting and shooter's demand drove subtle changes to the BT19. The latest modification stops the 3 to 9 rotation.It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized mated with an alloy steel Spigot that is finished with a Manganese Phosphate. Includes two (2) 10-32 x 1" flat head socket cap screws. Available in black only.Weight: 4.7 ounces
- Sale!The ADM-170-S base is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.This lever is manufactured by American Defense Manufacturing NOT by B&T Industries L.L.C. and is used on our Atlas, PSR and CAL models.Weight: 1.905 ounces
- Sale!The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces.A standard sling stud and sling stud spacer or two button head machine screws can be used as a fastener. NO HARDWARE INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks. Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.Weight: 1.20 ounces
- The BT21 Atlas TRG Bracket (ATB) is designed for use with the Sako TRG line of rifles that utilize the TRG bipod attachment slot with 0.42" hole spacing. The ATB provides a forward mounting position which is also closer to the bore-line.It is designed for use with either the 2-screw clamp (BT10, BT65, BT69, BT72) or quick detach lever (indicated by "LW17") models of Atlas Bipods, which would mount directly to the Picatinny Rail portion of the ATB.Although the No Clamp (NC) models can be mounted onto the ATB, it requires installation of the bipod during the installations of the ATB prior to reassembly of stock. THIS RESULTS IN A SEMI-PERMANENT, DEDICATION OF THE BIPOD TO THAT PARTICULAR RIFLE.The ATB is constructed from 6061-T6 Aluminum with a Type III hard anodized finish and heat treated alloy steel with a Manganese Phosphate finish. Available in black only. Fasteners included: two (2) M5 - .8 x 10” flat head socket cap screws, two (2) 10-32 x 3/4” flat head socket cap screws and two (2) 10-32 x 5/8” flat head socket cap screws
- Length: 3.83"
- Weight: 5.03 ounces
- The BT30-C Coyote Brown Atlas Bipod Pouch accommodates all V8, Standard PSR and CAL model Atlas Bipods. They offer a pocket for the Atlas Leg Extensions and another for optional Atlas feet.It does NOT accept the 5-H, Super CAL or Tall PSR/CAL models.Made out of 1000 denier cordura nylon. Also available in Ranger Green and Black.Weight: 7.9 ounces
- "Make Picatinny Great Again with the Patent Pending Arisaka Rail Slider. It transforms the Picatinny rail on your rifle into a multi-position sliding mount with a push button recoil lug. A unique detented knob is used to set sliding tension, accounts for out-of-spec rails, allows the mount to be removed or installed without having to slide it off the end of the rail, and can be quickly and easily tightened down for maximum precision." - Arisaka, LLCThe Picatinny Rail Slider will bolt directly to any “NC” (No Clamp) style of Atlas Bipods (except the 5-H which requires Extension Spigot for compatibility) using provided hardware. Compatible Atlas Bipod models listed below.It will also bolt directly to our BT20-B Bottom Picatinny Rail and BT56LD 1/4-20 Lever Adapter.The Rail Slider is CNC machined from stainless steel and MIL-A-8625 Type III hard coat anodized 6061-T651 aluminum. Includes two (2) 10-32 x 5/16" socket cap screws. Requires a 5/32" allen wrench for installation (not included). Recommended torque: 30 inch lbs. Made in the USA.This clamp is manufactured by Arisaka, LLC NOT by B&T Industries, LLC. All warranty issues are to be processed through Arisaka.
- Weight: 2.2 oz
- The “We Support Diplomacy” shirt features a rifle of our design being supported by our Accu-Shot PRM Monopod and PSR Atlas Bipod with Spiked Cleated Feet. Text reads, "We Support Diplomacy” with “the last 600 yards of” in a smaller font between “Support” and “Diplomacy”.Artwork and text are white printed onto a navy Gildan 100% cotton T-shirt. The front has a “B&T” circle logo on the front chest with “Bitter & Twisted” below.
