14.97 – 80.01 Range
- U.S. Snipers Sign reads, “No Trespassing Live Fire Range.” It measures 10 x 14" with two 1/4" holes centered top and bottom and are .063 thick Aluminum with a reflective background.
- Sand Gildan 100% cotton T-shirt with line art on the back of a SF sniper in Fallujah with text, “Converting terrorist one bullet at a time.” Features 3” round US Snipers logo on front left chest. Line art measures about 14” wide and created by a young lady free hand from a photo supplied by a member of the Special Forces.
- Black Gildan 100% cotton T-shirt with U.S. Snipers Spade logo on back measuring about 12” high with a small 3” round U.S. Snipers logo on front left chest. The spade logo was a co-op job. Mike McMillan of CSM Gear suggested using the spade and our artist came up with the lettering and design.
- For anyone that wishes to apply a finish to a currently owned B&T Atlas Bipod:When applying an aftermarket finish that requires the use of heat or disassembly to any B&T Atlas Bipod, we respectfully ask that you send that product to us so we can properly disassemble and return all appropriate parts to you for application of the finish.Once the finish is applied and the parts are returned to B&T, we will reassemble them to our specifications and ship it back to you. Please ensure parts are packaged appropriately to avoid any damage in transit. B&T will not be responsible for the finish or any damage to the finish.Anyone that disassembles, loses or breaks any parts in an attempt to disassemble/reassemble their Atlas Bipod will be charged $105.00 plus parts minimum.Anyone choosing not to use this service does so at their own risk and liability voiding the bipod's Lifetime Warranty.B&T Industries L.L.C. does not sell or ship parts.
- For anyone that wishes to apply a finish to a currently owned B&T Accu-Shot Monopod:When applying an aftermarket finish that requires the use of heat or disassembly to any B&T Accu-Shot Monopod, we respectfully ask that you send that product to us so we can properly disassemble and return all appropriate parts to you for application of the finish.Once the finish is applied and the parts are returned to B&T, we will reassemble them to our specifications and ship it back to you. Please ensure parts are packaged appropriately to avoid any damage in transit. B&T will not be responsible for the finish or any damage to the finish.Anyone that disassembles, loses, breaks parts in an attempt to disassemble or cannot reassemble their Accu-Shot Monopod will be charged $75.00 plus parts minimum.Anyone choosing not to use this service does so at their own risk and liability voiding the monopod's Lifetime Warranty.B&T Industries L.L.C. does not sell or ship replacement parts.
- The BT39 AI Monopod Bracket (AIMB) is an adapter required to attach the BT08-QK ASAI monopod (used with the original “legacy” AI style stocksides) to the new Accuracy International “Gen 2” style stocksides. It is machined from 4140 steel with a manganese phosphate finish. Modification to the Buttstock Stocksides (skins) is required to accept the BT39 AIMB.The BT39 AIMB is mounted to the AI frame using your existing BT08 Stock Collar Fastener (this fastener is not included in the BT39, it is included with the BT08) being threaded to the lower AI butt pad bolt. The BT08 is then attached to the BT39 AIMB by means of the supplied 5/16-24 socket head cap screw.Weight: 5.4 ounces
- BT78: SIG SAUER® CROSS™ Buttstock Rail Kit is a 2.05" 1913 Picatinny Rail that installs directly onto the folding buttstock of the SIG SAUER® CROSS™ rifle to allow for mounting our Accu-Shot Precision Rail Monopods (BT12-QK, BT13-QK and BT31-QK).Installation requires two factory 10-24 threaded holes spaced approximately 1.57" apart as found on our sample SIG SAUER® CROSS™. No modification is required. Comes with two 10-24 x 3/4" flat socket cap screws as seen. Use of a thread locker upon installation is suggested.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.Weight: 0.56 ouncesLength: 2.05"
- The BT29 Sako TRG Rail Kit comes complete and ready to install onto your TRG stock. The kit allows for the installation of the BT12-QK Accu-Shot Precision Rail Monopod (BT12-QK is shown but not included). It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only. Weight: 1.15 ouncesInstallation of the BT29 REQUIRES the temporary removal of the butt pad assembly and drilling of a second hole. Although, this can be accomplished with common hand tools, B&T Industries L.L.C. strongly recommends a competent Gunsmith install the BT29 Sako TRG Rail Kit.
- The BT52 ACS/STR Picatinny Rail Adaptor for the popular Magpul ACS and STR style stocks provides the means to attach an Accu-Shot Precision Rail Monopod (BT12-QK, BT13-QK and BT31-QK) to your Magpul ACS and STR Stock. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized and steel. The two piece adaptor replaces the polymer insert found on these stocks and is held in place with the supplied fasteners. Other than removing the buttpad and sliding the insert out, no modification is required. A 1/8 hex wrench is required but NOT included. Available in black only.Weight: 1.0 ounce
- The BT51 ACE bracket was designed for the popular A.C.E. Skeleton Stock and provides the means to attach an Accu-Shot Precision Rail Monopod (BT12-QK, BT13-QK and BT31-QK) to your A.C.E. Skeleton Stock. It is machined from 6061-T6 aluminum Mil-Spec Type III hard anodized. Besides the Picatinny rail for the PRM, the BT51 has two flush cups for attaching slings. The two piece bracket is clamped to the angular tube and is held in place with the four supplied SHCS fasteners. No modification is required. A 5/32 hex wrench is required but NOT included. Available in black only.Weight: 2.9 ounces
- The BT56 LD-L 1/4-20 Lever Adapter is a Picatinny Rail mounting solution to interface between a Tripod or similar supporting device (shooting/walking/camera stick type monopod) with a standard ¼-20 threaded stud and a firearm with Picatinny Rail.Once the BT56 LD-L is installed on your supporting device using the ¼-20 threaded hole, your Picatinny Rail equipped Rifle, Pistol or Shotgun can be quickly mounted and held to your supporting device.This is a great option for getting added support for hunting and tactical situations where a bipod is not practical. The BT56 LD-L will hold your supporting device to the firearm for transitioning or relocation of firearm.It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. No hardware included. Available in black only.To order the without the installed ADM-170-S, view the BT56 LD 1/4-20 AdapterWeight: 2.7 ounces
- The BT56 LD 1/4-20 Adapter is a mounting solution to interface between a Tripod or similar supporting device (shooting/walking/camera stick type monopod) with a standard ¼-20 threaded stud and a firearm.Once the BT56 is installed on your supporting device using the ¼-20 threaded hole found on the BT56, the other side will accept ant 17S size Picatinny lever or ARCA mount with the matching two hole pattern of 1.100” and 10/32 threaded holes. After completed with a mount or your choice, your Picatinny or ARCA rail equipped Rifle, Pistol or Shotgun can be quickly mounted and held to your supporting device.This is a great option for getting added support for hunting and tactical situations where a bipod is not practical. The BT56 LD will hold your supporting device to the firearm for transitioning or relocation of firearm.It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. No hardware included. Available in black only.The Picatinny Rail lever mount is NOT included. However, the BT56 LD and ADM-170-S can be ordered together as our BT56 LD-L. Other compatible options we currently offer are Area 419's ARCALOCK Clamp and Arisaka's Picatinny Rail Slider.Weight: 0.8 ounces
- The BT26 CAR Adaptor installed on your CAR collapsible stock allows any of our Precision Rail Monopod style monopods to be installed. This is a great option for shooters that want the LOP adjustments available with a collapsible stocks, but want the stability provided by the Accu-Shot. The BT26 replaces the factory loop on the stock while providing the means to re-attach the fixed sling loop with the loop on the left, right or bottom angled forward or backward. It is made of 1018 Cold Rolled Steel and treated with magnesium phosphate. Available in black only.Weight: 1.1 ounce
- The front of the “Support in Retro” shirt features a rifle of our design supported by our PSR Atlas Bipod with the new Atlas Raider Cleat Feet and B&T logo. The back features the buttstock from the same rifle supported by our Accu-Shot PRM Monopod.Artwork and text are yellow printed onto a navy, Gildan 2400 Ultra Cotton long sleeve shirt.
- Mint Green Gildan 100% cotton T-shirt with “B&T” circle logo on the front chest with “Bitter & Twisted” below. On the back is artwork featuring a single daisy flower and line art of a rifle in our design with our BT46-LW17 PSR Atlas Bipod and BT74 Raider Cleat feet and a BT12-QK Accu-Shot Monopod installed with the words "Daisy If You Do." Image and words are in yellow ink. Original artwork.
- Grey Gildan 100% cotton T-shirt with “B&T” circle logo on the front chest with “Bitter & Twisted” below. On the back is the image seen with the following phrase in both English and Chinese:
We just want to make sure the thieves know…Atlas Precision Bipods® & Accu-Shot Precision Monopods® registered trademark patent owner is B&T Industries L.L.C...All B&T products are made in the USA and we are proud of it.
- The “We Support Diplomacy” shirt features a rifle of our design being supported by our Accu-Shot PRM Monopod and PSR Atlas Bipod with Spiked Cleated Feet. Text reads, "We Support Diplomacy” with “the last 600 yards of” in a smaller font between “Support” and “Diplomacy”.Artwork and text are white printed onto a navy Gildan 100% cotton T-shirt. The front has a “B&T” circle logo on the front chest with “Bitter & Twisted” below.
- The B&T Counter Mats are 11" x 17" with round corners. Each are hard top laminated with .125" mouse pad backer and features line art of the PSR Atlas Bipod and B&T logo.
- Sale!The BT51 ACE bracket was designed for the popular A.C.E. Skeleton Stock and provides the means to attach an Accu-Shot PRM style monopod (BT12-QK, BT13-QK and BT31-QK) to your A.C.E. Skeleton Stock. It is machined from 6061-T6 aluminum Mil-Spec Type III hard anodized. Besides the Picatinny rail for the PRM, the BT51 has two flush cups for attaching slings. The two piece bracket is clamped to the angular tube and is held in place with the four supplied SHCS fasteners. No modification is required. A 5/32 hex wrench is required but NOT included. Available in black only.Weight: 2.9 ouncesDesigned, Engineered, Machined & Assembled in America.
- Sale!The BT49 - 2.05" 1913 Adjustable Picatinny Rail has a center-to-center spacing of 1.2 - 1.6". Two machine screws can be used (not included, see BT1517) to attach this rail to the forearm of standard rifle stocks. Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish.The BT49 can also be attached to a horizontal surface on the Butt section to attach our Precision Rail Monopods. Available in black only.
- Length: 2.05"
- Weight: 0.4 ounces
- Sale!The BT34 - 2.05" 1913 Picatinny Rail has a center to center spacing of 1.6". Two machine screws can be used not included, see BT1517) to attach this rail to the forearm of standard rifle stocks. It can also be attached to a horizontal surface on the Butt section to attach our Precision Rail Monopods.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. NO HARDWARE INCLUDED. Available in black only.Weight: 0.4 ounces
- Sale!The BT33 Tube Rail Kit consists of a Steel Bar Nut, designed to fit inside free float tubes, and a low profile 1913 Picatinny rail 2.05" long with a 1.00" radius back and a center-to-center spacing of 1.602 between the holes.The BT33 is installed with the Steel Bar Nut inside the free float tube and the 1913 Picatinny rail on the outside with the matching holes aligned. Fastened together, they allow the attaching of the Atlas Bipod or other accessories to free float tubes.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Manganese phosphate finish on the steel bar nut. Hardware included. Available in black only.
- Length: 2.05"
- Weight: 1.3 ounces
- Sale!The BT28 AFAR Rail Kit will mount into accessory rails and provide a low profile 1913 Picitinny rail for attaching the Atlas Bipods or other accessories. This is a great option for shooters that have accessory rails and want to use their rail mounted Atlas on several rifles.The uniquely designed rectangle nuts (BT28-N) fit both Freeland and Anschutz style rails by rotating them 90°.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish with 4041 Alloy Steel fasteners. Includes two rectangle nuts, two (2) 10-32 x 3/8″ flat head socket cap screws and two (2) 10-32 x 1/2″ flat head socket cap screws. Available in black only.
- Length: 2.05"
- Weight: 0.89 ounces
