- "Experience the blend of reliability and lightness with the BTC-Pro clamp. This screw knob clamp offers precise control, ensuring secure attachment of your equipment while shedding unnecessary weight. For photographers and outdoor enthusiasts seeking the optimal balance between strength and portability, the BTC-Pro is your ultimate companion. No compromise on durability, no added burden - that's the BTC-Pro promise." - Really Right Stuff SOAR DivisionThe BTC-Pro Bipod Clamp's Dual Combination Jaw allows for the attachment to either a Picatinny Rail or RRS 1.5" Dovetail Standard. It will bolt directly to any “NC” (No Clamp) style of Atlas Bipods (except the 5-H which requires Extension Spigot for compatibility) using provided hardware. Compatible Atlas Bipod models listed below.It will also bolt directly to our BT56LD 1/4-20 Lever Adapter.The BTC-Pro Bipod Clamp is CNC machined from 6061-T651 aluminum. Includes two (2) 10-32 x 3/8 flat-head screws and (1) 1/8" hex-key. Made in the USA.This clamp is manufactured by Really Right Stuff, SOAR Division NOT by B&T Industries, LLC. All warranty issues are to be processed through Really Right Stuff.
- "Make Picatinny Great Again with the Patent Pending Arisaka Rail Slider. It transforms the Picatinny rail on your rifle into a multi-position sliding mount with a push button recoil lug. A unique detented knob is used to set sliding tension, accounts for out-of-spec rails, allows the mount to be removed or installed without having to slide it off the end of the rail, and can be quickly and easily tightened down for maximum precision." - Arisaka, LLCThe Picatinny Rail Slider will bolt directly to any “NC” (No Clamp) style of Atlas Bipods (except the 5-H which requires Extension Spigot for compatibility) using provided hardware. Compatible Atlas Bipod models listed below.It will also bolt directly to our BT20-B Bottom Picatinny Rail and BT56LD 1/4-20 Lever Adapter.The Rail Slider is CNC machined from stainless steel and MIL-A-8625 Type III hard coat anodized 6061-T651 aluminum. Includes two (2) 10-32 x 5/16" socket cap screws. Requires a 5/32" allen wrench for installation (not included). Recommended torque: 30 inch lbs. Made in the USA.This clamp is manufactured by Arisaka, LLC NOT by B&T Industries, LLC. All warranty issues are to be processed through Arisaka.
- Weight: 2.2 oz
- CLOSEOUT SALE. Limited availability.The Gen. 1 BT27 Folding Foregrip offers two opposing flat surfaces to secure light switches with the installed Buna O-Rings. Removing the bottom cap will reveal a storage compartment designed to hold a single 123 battery. The unique design protects the battery from being drained by placing the positive side (+) towards the relieved cap.When folded, the profile is reduced for a cleaner presentation for lower rifle positions as well as reducing the stop or snag point found with fixed vertical fore-grips. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
- Deployed Length: 4.15”
- Folded Length: 4.3”
- Weight: 7.3 ounces
- The BT81 Lil’ Brandi is our long awaited answer to getting a 1913 Picatinny Rail mounted on a traditional rifle stock without taking the rifle apart, drilling holes or damaging the stock. Installation utilizes the existing sling stud and provided cross pin, set screw and hex wrench.It features 3 usable slots for attaching any rail mounted Atlas Bipod and a sling attachment to utilize a sling if desired. The angular wings with rubber pads contact the stock. Machined to Picatinny rail standards from 7075-T6 aluminum with Mil-Spec Type III Class 2 finish. No disassembly required. Patent Pending.Not intended for use with flat stocks (reference fourth and fifth image). If the stock has two sling studs, we strongly recommend using our BT15 or BT17
- Dimensions: 1.95 x 1.5 x 0.663 in
- Weight: 0.89 ounces
- The ARCALOCK Spigot Extension was designed for use with Area 419's ARCALOCK Clamp.Some ARMS17-S accessory with matching hole pattern of 1.100” such as American Defense's ADM-170-s, Arisaka's Picatinny Rail Slider or Really Right Stuff's BTC-Pro Bipod Clamp. However due to design, some clamps will NOT fit such as Magpul's QR Rail Grabber (MAG1196) and Really Right Stuff's SC-ARC Bipod Clamp.It is ideal to adapt our BT35-NC 5-H Atlas Bipod to an ARCA clamp for clearance of the cradle and operation of the clamp's knob. It will also extend all "NC" or No Clamp models (view complete list below) of Atlas Bipods out extra 1.25″ for increased stability. To use with your Bipod that already has a clamp, lever or mount installed, simply remove it to attach the spigot.This spigot is manufactured by Area 419 NOT by B&T Industries L.L.C. Includes two 10-32 x 3/8" flathead socket screws and two 10-32 x 5/8" flathead socket screws.
- Weight: 1.79 oz
- Dimensions: 3.2 × 1.24 × 0.35 in
- The BT80 M-LOK® Flush Cup Rail is designed for use with all M-LOK® compatible hand guards, forends and buttstocks. It has 5 usable slots and a flush cup allowing the use of Flush Cup sling swivels and sling studs (neither provided). The BT80 can be used to attach any of our 1913 Picatinny rail mounted Atlas Bipods, Accu-Shot Monopods or Folding Foregrip. It requires standard M-LOK® sized slots for mounting.Machined from 6061-T6 aluminum and Type III hard coat anodized. It comes with two 10-24 x 3/8 fasteners and two M-LOK® nuts. Available in black only.
- Length: 2.875"
- Center-to-center: 1.575"
- Width: 0.835"
- Weight: 1.038 oz
- The BT79 Barrett® M107A1® Rail is a 5-slotted 1913 Picatinny rail for direct installation to the Barrett® M107A1® providing the means to mount our Atlas Bipod Picatinny rail mounted bipods. It is also compatible with the Barrett® M82A1®.The center-to-center hole spacing of 3.359" fits the outer two holes of the existing three holes in the chassis. We strongly suggest that you measure the hole spacing on your rifle.The center section is machined to Picatinny rail standards from 4140 cold finished steel with a maganese phosphate finish. Two 3/8-16 x 3/4” flat head cap screws are provided.The original 11/16" nuts and tooth lock washers are reused to complete assembly. An 11/16" socket and ratchet wrench OR break-over bar and a 7/32” hex wrench is required for installation (none included). Check out installation instruction below. No modification needed.
- Overall Length: 4.309"
- Weight: 5.22 ounces
- BT78: SIG SAUER® CROSS™ Buttstock Rail Kit is a 2.05" 1913 Picatinny Rail that installs directly onto the folding buttstock of the SIG SAUER® CROSS™ rifle to allow for mounting our Accu-Shot Precision Rail Monopods (BT12-QK, BT13-QK and BT31-QK).Installation requires two factory 10-24 threaded holes spaced approximately 1.57" apart as found on our sample SIG SAUER® CROSS™. No modification is required. Comes with two 10-24 x 3/4" flat socket cap screws as seen. Use of a thread locker upon installation is suggested.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.Weight: 0.56 ouncesLength: 2.05"
- The BT20-B/ARCALOCK Clamp is our BT20-B Picatinny Rail installed onto Area 419's ARCALOCK Clamp. It will accept any rail mounted bipod.The BT20-B Rail is machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.The ARCALOCK Clamp features a proprietary two-stage screw design. Both the Clamp and Knob are machined from 6061-T6 Aluminum with Type III Hardcoat black anodized Clamp and Knob. The screw is turned from 303 stainless steel.The clamp is manufactured by Area 419 NOT by B&T Industries L.L.C. All warranty issues are to be processed through Area 419. It can be used on our Atlas V8, PSR, CAL and Super CAL models.
- Weight: 3.2 ounces
- Length: 1.6"
- Sold as a single 10-32 x 1.25" Socket Cap Screw.Purchasing a quantity of two (2) 10-32 x 1.25" Socket Cap Screws would be ideal for use with any 2-screw clamp Atlas Bipod mounts (BT10, BT65, BT69, BT72). These are what we have used for contractual fulfillments.Purchasing a quantity of one (1) 10-32 x 1.25" Socket Cap Screw would be ideal for use with any Precision Rail Mount (PRM) Accu-Shot Monopod (BT12, BT13, BT31).
- Sold as a single 10-32 x 1.25" Clamp Bolt - Flat Head Fastener. The material is 4140 Alloy Steel with a manganese phosphate finish.Purchasing a quantity of two (2) 10-32 x 1.25" Clamp Bolts - Flat Head Fasteners would be ideal for use with any 2-screw clamp Atlas Bipod mounts (BT10, BT65, BT69, BT72).Purchasing a quantity of one (1) 10-32 x 1.25" Clamp Bolt - Flat Head Fastener would be ideal for use with any Precision Rail Mount (PRM) Accu-Shot Monopod (BT12, BT13, BT31).We have also used 10-32 x 1.25" Socket Cap Screws for contractual fulfillments available.
- The BT75 Atlas 5-H & Super CAL Raider Cleat Feet are turned from 416 Stainless Steel bar stock in one piece for strength and durability. They will fit 5-H and Super CAL model Atlas Bipods. Easily installed with the press of a stainless steel plunger.The Cleat portion is approximately 1.225” long with the largest outer diameter of approximately 1.443”. Sold as a pair. Available in raw stainless steel only.NSN 1005-01-708-8219Total Weight of Pair: 4.76 ouncesProduct will work on 5-H and Super CAL models only.
- The BT74 Atlas Raider Cleat Feet are turned from 303 Stainless Steel bar stock in one piece for strength and durability. They will fit V8, PSR and CAL series of Atlas Bipods. They will also fit bipods/adapters that use Atlas feet. Easily installed with the press of a stainless steel plunger.The Cleat portion is approximately 1.000” long with the largest outer diameter of approximately 1.155”. Sold as a pair. Available in raw stainless steel only.NSN 1005-01-700-6502Total Weight of Pair: 2.6 ouncesProduct will work on V8, PSR and CAL models only.
- The BT73 M-LOK® Rail is designed for use with all M-LOK compatible hand guards, forends and buttstocks. It has 3 usable slots for attaching any of our 1913 Picatinny rail mounted Atlas Bipods, Accu-Shot Monopods or Folding Foregrip. It requires standard M-LOK sized slots for mounting.Machined from 6061-T6 aluminum and Type III hard coat anodized. It comes with two 10-24 x 3/8 fasteners and two M-LOK nuts. Available in black only.
- Length: 1.575"
- Width: 0.835"
- Weight: 0.59 oz
For a direct M-LOK to "NC" (No Clamp) Atlas Bipod interface, check out our BT70: Atlas M-LOK® Adapter - Sold as a single 10-32 x 3/8" Flathead Socket Screw.These are the same screws that come installed on all "NC" (No Clamp) models of Atlas Bipods.
- The M6 x 80 x 100 Long Bolt is compatible with both the BT08-QK Accu-Shot Accuracy International (ASAI) Monopod and BT57-QK Accu-Shot Accuracy International AT Monopod.It is required if additional length of pull spacers are used with Accuracy International buttstocks that our BT08-QK and BT57-QK are being installed on.If you are needing a replacement standard bolt, see our BT0857-B: M6 x 80 x 80 Replacement Bolt
- "Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction. If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure. Introducing the ARCALOCK Dovetail Rail System." - Area 419The ARCALOCK Clamp works on all standard ARCA/1.5" dovetail rails. It will bolt directly to any "NC" (No Clamp) style of Atlas Bipods (except the 5-H which requires Extension Spigot for compatibility). Compatible Atlas Bipod models listed below.It will also bolt directly to our BT20-B Bottom Picatinny Rail and BT56LD 1/4-20 Lever Adapter.The ARCALOCK Clamp features a proprietary two-stage screw design. Both the Clamp and Knob are machined from 6061-T6 Aluminum with Type III Hardcoat black anodized Clamp and Knob. The screw is turned from 303 stainless steel.This clamp is manufactured by Area 419 NOT by B&T Industries L.L.C. All warranty issues are to be processed through Area 419. NO HARDWARE INCLUDED.
- Weight: 2.5 oz
- The BT70 Atlas M-LOK® Adapter is an interface between all Atlas bipods with the “NC” designator in their names (BT10-NC, BT46-NC, BT47-NC, BT35-NC, BT65-NC, BT69-NC, BT72-NC) and M-LOK style mounting systems. It requires two (2) M-LOK standard sized slots for mounting.Machined from 6061-T6 aluminum and Type III hard coat anodized and comes with two 3/8 fasteners and two M-LOK nuts. Available in black only.
- Length: 3.15"
- Width: 1.11"
- Weight: 1.1 oz
For an M-LOK to Picatinny rail attachment, check out our BT73: M-LOK® Rail - The BT6569ML and BT6569ML-NC are current production CAL mounts that provide 63 degrees of Cant. Additional Cant is considered an upgrade (see illustrations to determine which mount you have).The additional degrees of Cant was requested by a member of the SOF community and longtime user of B&T products.Variation differences and compatibility detailed in description below.
- The BT66 Atlas 5-H and Super CAL BAS Ski Feet were developed from listening to customer feedback. Starting with 3.5" 6061-T6 bar stock, these monsters are made to slide in both the 90 and 45 degree leg positions. They are easily installed with the press of a stainless steel plunger to the 5-H and Super CAL models of Atlas Bipod. Sold as a pair.Weight: 6.16 ouncesProduct will work on 5-H and Super CAL models only.
- The BT63 Nose Rail fulfills the desire to get bipods further forward and closer to the bore. Inspired to raise the bipod’s Apex, the “Nose Rail” is designed to be bedded into a channel in the stock with threaded holes for attaching a second rail or sling studs to the bottom of stock.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. NO HARDWARE INCLUDED. Available in black only.
- Overall Length: 7.0"
- Picatinny Rail Section Length: 2.0"
- Center-to-center Hole Spacing: 3" and 3.75"
- Weight: 2.6 ounces
- When a member of a government agency asked us why the BT27 did not offer a 45 degree position, we did not have an answer. Now it does! The newly redesigned BT27 Folding Foregrip offers two opposing flat surfaces to secure light switches with the installed Buna O-Rings. Removing the bottom cap reveals a storage compartment designed to hold a single 123 battery. The unique design protects the battery from being drained by placing the positive side (+) towards the relieved cap. We also trimmed the handle to decrease weight while maintaining battery storage and touch pad retainers. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
- Deployed Length: 4.073"
- Folded Length: 4.032"
- Weight: 5.2 ounces
- The Groupy measures groups within a 1.5” diameter. Measurements are laser cut into acrylic with a glow-in-the-dark cord attached.Shoot three to five shots. Lay Groupy over shot group. Adjust until one of the circles cross the center of the two outer most holes. Read measurement on that circle to determine group size.
Get FREE SHIPPING on standard, domestic USA orders over $99.00.
B&T Industries, LLC
WE ARE SUPPORT
SHOP
RESOURCES
SUPPORT
1 (316) 721 – 3222
Mon-Fri 8:00-4:30 CST
CAGE CODE 3L7F2
