Get FREE SHIPPING on standard, domestic USA orders over $99.00.

What is a Blemished Product? A unit with strictly cosmetic blemish(es) that did not pass our Quality Control because of the finish and/or surface deviations. Units are new and unused. They are 100% functional, ready to go into service and still carry our No-Fine-Print Lifetime Warranty. Blemishes will vary between each unit carries our Blemished Logo.

  • Sale!
    The BT01-QK is our standard height Sling Stud Mount with QK01 Quick Knob. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
    • Elevation Range: 3.50 – 4.65"
    • Folded Length: 3.65" approximate
    • Weight: 6.5 ounces
    NOTICE: PART BT03 REQUIRED FOR USE WITH M1A/AR FAMILY OF RIFLESHow to determine best size Accu-Shot Precision MonopodProudly designed, engineered, machined and assembled in america
  • Sale!
    The BT04-QK is our standard height Sling Stud Mount with QK01 Quick Knob. Additional Thumbnut installed to LOCK the unit into a fixed elevation. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
    • Elevation Range: 3.75 – 4.85”
    • Folded Length: 3.95"
    • Weight: 7.3 ounces
    NOTICE: PART BT03 REQUIRED FOR USE WITH M1A/AR FAMILY OF RIFLESHow to determine best size Accu-Shot Precision MonopodProudly designed, engineered, machined and assembled in america
  • Sale!
    The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, LT271 or any ARCA dovetail mount with the same hole pattern. The BT46-NC will also mount directly our BT19 AI Spigot or BT70 M-LOK® Adapter.It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Includes two 10-32 x 3/8" flathead socket screws. Available in black only.The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR). 
    • Height Range: 5 - 9.4" (6.5” at 90°)
    • Preloaded Pan: 30 degrees
    • Preloaded Cant: 30 degrees
    • Position Button 0.5" diameter
    • Fore and Aft pivot limiting Bosses
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Larger, stronger inner legs
    • Weight: 11.42 ounces approx.
    • Footprint: 8–11"
  • Sale!
    The BT05-QK is our mid-height Sling Stud Mount with QK02 Quick Knob. Additional Thumbnut installed to LOCK the unit into a fixed elevation. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
    • Elevation Range: 4.80 – 5.85"
    • Folded Length: 4.95" approximate
    • Weight: 8.2 ounces
    NOTICE: PART BT03 REQUIRED FOR USE WITH M1A/AR FAMILY OF RIFLESHow to determine best size Accu-Shot Precision MonopodProudly designed, engineered, machined and assembled in america
  • Sale!
    The BT06-QK is our extended height Sling Stud Mount with QK03 Quick Knob. Additional Thumbnut installed to LOCK the unit into a fixed elevation. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
    • Elevation Range: 5.70 – 6.85”
    • Folded Length: 5.95" approximate
    • Weight: 9.0 ounces
    NOTICE: PART BT03 REQUIRED FOR USE WITH M1A/AR FAMILY OF RIFLESHow to determine best size Accu-Shot Precision MonopodProudly designed, engineered, machined and assembled in america
  • Sale!
    The BT12-QK is our standard height Precision Rail Monopod (PRM) with QK01 Quick Knob. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only. NSN 1005-01-678-1553
    • Elevation Range: 3.75 – 4.65”
    • Folded Length: 3.85" approximate
    • Weight: 7.4 ounces
    How to determine best size Accu-Shot Precision MonopodProudly designed, engineered, machined and assembled in america
  • Sale!
    The BT13-Qk is our mid-height Precision Rail Monopod (PRM) with QK02 Quick Knob. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
    • Elevation Range: 4.75 – 5.65”
    • Folded Length: 4.80" approximate
    • Weight: 8.3 ounces
    How to determine best size Accu-Shot Precision MonopodProudly designed, engineered, machined and assembled in america
  • Sale!
    The BT31-QK is our extended height Precision Rail Monopod (PRM) with QK03 Quick Knob. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
    • Elevation Range: 5.65 – 6.60"
    • Folded Length: 5.80" approximate
    • Weight: 9.0 ounces
    How to determine best size Accu-Shot Precision MonopodProudly designed, engineered, machined and assembled in america
  • Sale!
    The BT15 - 3.35" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 1.76 – 2.78" and a relieved back to accommodate curved surfaces.A standard sling stud and sling stud spacer can be used as one fastener or two button head machine screws can be used. NO HARDWARE INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks. Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.Weight: 0.92 ouncesProudly designed, engineered, machined and assembled in america
  • Sale!
    The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces.A standard sling stud and sling stud spacer or two button head machine screws can be used as a fastener. NO HARDWARE INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks. Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.Weight: 1.20 ouncesProudly designed, engineered, machined and assembled in america
  • Sale!
    The BT20B Atlas Accuracy International Spigot Bottom Rail is the same rail found in the BT20, but consists of the bottom 1913 rail ONLY. It attaches to the BT19 AAIS on the bottom and accepts any rail mounted bipod. It will also attach to many ARCA rail adaptors currently on the market with the same two hole pattern of 1.100” to the ARCA rail and accept any rail mounted bipod.It is the same rail found on our BT21 TRG Bracket and BT43 Leveraged Rail. It will also attach to the ARCALOCK Clamp.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. NO HARDWARE INCLUDED. Available in black only.
    • Length: 1.60"
    • Weight: 0.57 ounces
    Proudly designed, engineered, machined and assembled in america
  • Sale!
    The BT28 AFAR Rail Kit will mount into accessory rails and provide a low profile 1913 Picitinny rail for attaching the Atlas Bipods or other accessories. This is a great option for shooters that have accessory rails and want to use their rail mounted Atlas on several rifles.The uniquely designed rectangle nuts (BT28-N) fit both Freeland and Anschutz style rails by rotating them 90°.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish with 4041 Alloy Steel fasteners. Includes two rectangle nuts, two (2) 10-32 x 3/8″ flat head socket cap screws and two (2) 10-32 x 1/2″ flat head socket cap screws. Available in black only.
    • Length: 2.05"
    • Weight: 0.89 ounces
  • Sale!
    The BT34 - 2.05" 1913 Picatinny Rail has a center to center spacing of 1.6". Two machine screws can be used not included, see BT1517) to attach this rail to the forearm of standard rifle stocks. It can also be attached to a horizontal surface on the Butt section to attach our Precision Rail Monopods.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. NO HARDWARE INCLUDED. Available in black only.Weight: 0.4 ouncesProudly designed, engineered, machined and assembled in america
  • Sale!
    The BT30-C Coyote Brown Atlas Bipod Pouch accommodates all V8, Standard PSR and CAL model Atlas Bipods. They offer a pocket for the Atlas Leg Extensions and another for optional Atlas feet.It does NOT accept the 5-H, Super CAL or Tall PSR/CAL models.Made out of 1000 denier corder nylon. Also available in Ranger Green and Black.Weight: 7.9 ounces
  • Sale!
    The BT33 Tube Rail Kit consists of a Steel Bar Nut, designed to fit inside free float tubes, and a low profile 1913 Picatinny rail 2.05" long with a 1.00" radius back and a center-to-center spacing of 1.602 between the holes.The BT33 is installed with the Steel Bar Nut inside the free float tube and the 1913 Picatinny rail on the outside with the matching holes aligned. Fastened together, they allow the attaching of the Atlas Bipod or other accessories to free float tubes.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Manganese phosphate finish on the steel bar nut. Hardware included. Available in black only.
    • Length: 2.05"
    • Weight: 1.3 ounces
    Proudly designed, engineered, machined and assembled in america
  • Sale!
    The BT49 - 2.05" 1913 Adjustable Picatinny Rail has a center-to-center spacing of 1.2 - 1.6". Two machine screws can be used (not included, see BT1517) to attach this rail to the forearm of standard rifle stocks. Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish.The BT49 can also be attached to a horizontal surface on the Butt section to attach our Precision Rail Monopods. Available in black only.
    • Length: 2.05"
    • Weight: 0.4 ounces
  • Sale!
    The BT51 ACE bracket was designed for the popular A.C.E. Skeleton Stock and provides the means to attach an Accu-Shot PRM style monopod (BT12-QK, BT13-QK and BT31-QK) to your A.C.E. Skeleton Stock. It is machined from 6061-T6 aluminum Mil-Spec Type III hard anodized. Besides the Picatinny rail for the PRM, the BT51 has two flush cups for attaching slings. The two piece bracket is clamped to the angular tube and is held in place with the four supplied SHCS fasteners. No modification is required. A 5/32 hex wrench is required but NOT included. Available in black only.Weight: 2.9 ouncesDesigned, Engineered, Machined & Assembled in America.
  • Sale!

    The BT66 Atlas 5-H BAS Ski Feet are another example of us learning how our products are used and what end users want in order to get more out of our products. Starting with 3.5" 6061-T6 bar stock, these monsters are made to slide in both the 90 and 45 degree leg positions. They are easily installed with the press of a stainless steel plunger to the 5-H model Atlas Bipod. Sold as a pair.

    Weight: 6.16 ounces

    Product will work on 5-H and Super CAL models only.

  • Sale!
    The BT72-NC Super CAL (Cant And Loc) Atlas Bipod does not PAN. This "No Clamp" model has a two hole pattern of 1.100” with 10/32 threaded holes. It requires any 17S size ”Lever Mount” such as the ADM-170-S, ARMS 17S, LT271 or any Arca dovetail mount with the same hole pattern. The BT72-NC will also mount directly to our BT19 AI Spigot and BT70 M-LOK® Adapter.Adjustable, preloaded Cant with additional tension lever using original KMW “Pod-Loc®.” Read how to adjust the Pod-Loc® lever below.Includes patented 45° leg positions, non-rotating legs, optional quick change feet and “Hold What You Move Technology®.” It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and has heat treated stainless steel components. Includes two 10-32 x 3/8" flathead socket screws. Available in black only.
    • Height Range: 5.75-10.87"
    • Cant: 63 degrees
    • Position Button: 0.5" diameter
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Weight: 21.3 ounces
    • Footprint: 14.75-19.37"
  • Sale!
    The BT69-NC Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with 10/32 threads. It accepts any 17S size lever style mount such as the ADM-170-S, ARMS 17S, LT271 or any ARCA dovetail mount with the same hole pattern. The BT69-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.Adjustable, preloaded Cant with additional tension lever using original KMW “Pod-Loc®.” Read how to adjust the Pod-Loc® lever below.It is comprised of 6061-T6 aluminum, except the inner legs which are made from 7075-T6 aluminum, Mil-Spec Type III hard coat anodized and have heat treated stainless steel components.
    • Height Range: 6-12.25” (8.11” at 90°)
    • Cant: 63 degrees
    • Position Button 0.5" diameter
    • 5 leg positions: 0, 45, 90, 135 & 180°
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Larger, stronger inner legs
    • Weight: 14.2 ounces
    • Footprint: 9.25-16.5”
  • Sale!
    The BT57-QK Accu-Shot Accuracy International AT (ASAIAT) Monopod is designed specifically to fit the Accuracy International Accuracy Tactical Rifle (AT) and Accuracy Tactical Accuracy International Chassis Systems (ATAICS). Also Known as the Gen. 2 stocks.It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
    • Elevation Range: 3.00 - 4.15”
    • Folded Length: 4.10" approximate
    • Weight: 8.5 ounces
    PLEASE NOTE: Customers with the Accuracy International AE, AW and AICS systems for the original thumbhole “Legacy” style stock sides, please see our BT08-QK.Proudly designed, engineered, machined and assembled in america
Go to Top