- The BT07 Tac-Cap is an optional steel cap that replaces the standard plastic cap found at the bottom of the monopod knob. It can damage soft surfaces and is intended for units that will experience hard surface use.Installation of the BT07 is friction-fit and requires no tools. However, we recommend permanently setting the BT07 and will do so at no additional charge when ordered along with any Accu-Shot Monopod, unless otherwise specified in the "comments" section. Available in black only.Weight: 0.35 ounces
- The BT66 Atlas 5-H and Super CAL BAS Ski Feet were developed from listening to customer feedback. Starting with 3.5" 6061-T6 bar stock, these monsters are made to slide in both the 90 and 45 degree leg positions. They are easily installed with the press of a stainless steel plunger to the 5-H and Super CAL models of Atlas Bipod. Sold as a pair.Weight: 6.16 ouncesProduct will work on 5-H and Super CAL models only.
- Sold as a single 10-32 x 1.25" Socket Cap Screw.Purchasing a quantity of two (2) 10-32 x 1.25" Socket Cap Screws would be ideal for use with any 2-screw clamp Atlas Bipod mounts (BT10, BT65, BT69, BT72). These are what we have used for contractual fulfillments.Purchasing a quantity of one (1) 10-32 x 1.25" Socket Cap Screw would be ideal for use with any Precision Rail Mount (PRM) Accu-Shot Monopod (BT12, BT13, BT31).
- When a member of a government agency asked us why the BT27 did not offer a 45 degree position, we did not have an answer. Now it does! The newly redesigned BT27 Folding Foregrip offers two opposing flat surfaces to secure light switches with the installed Buna O-Rings. Removing the bottom cap reveals a storage compartment designed to hold a single 123 battery. The unique design protects the battery from being drained by placing the positive side (+) towards the relieved cap. We also trimmed the handle to decrease weight while maintaining battery storage and touch pad retainers. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
- Deployed Length: 4.073"
- Folded Length: 4.032"
- Weight: 5.2 ounces
- The BT75 Atlas 5-H & Super CAL Raider Cleat Feet are turned from 416 Stainless Steel bar stock in one piece for strength and durability. They will fit 5-H and Super CAL model Atlas Bipods. Easily installed with the press of a stainless steel plunger.The Cleat portion is approximately 1.225” long with the largest outer diameter of approximately 1.443”. Sold as a pair. Available in raw stainless steel only.NSN 1005-01-708-8219Total Weight of Pair: 4.76 ouncesProduct will work on 5-H and Super CAL models only.
- The BT30-C Coyote Brown Atlas Bipod Pouch accommodates all V8, Standard PSR and CAL model Atlas Bipods. They offer a pocket for the Atlas Leg Extensions and another for optional Atlas feet.It does NOT accept the 5-H, Super CAL or Tall PSR/CAL models.Made out of 1000 denier cordura nylon. Also available in Ranger Green and Black.Weight: 7.9 ounces
- "Make Picatinny Great Again with the Patent Pending Arisaka Rail Slider. It transforms the Picatinny rail on your rifle into a multi-position sliding mount with a push button recoil lug. A unique detented knob is used to set sliding tension, accounts for out-of-spec rails, allows the mount to be removed or installed without having to slide it off the end of the rail, and can be quickly and easily tightened down for maximum precision." - Arisaka, LLCThe Picatinny Rail Slider will bolt directly to any “NC” (No Clamp) style of Atlas Bipods (except the 5-H which requires Extension Spigot for compatibility) using provided hardware. Compatible Atlas Bipod models listed below.It will also bolt directly to our BT20-B Bottom Picatinny Rail and BT56LD 1/4-20 Lever Adapter.The Rail Slider is CNC machined from stainless steel and MIL-A-8625 Type III hard coat anodized 6061-T651 aluminum. Includes two (2) 10-32 x 5/16" socket cap screws. Requires a 5/32" allen wrench for installation (not included). Recommended torque: 30 inch lbs. Made in the USA.This clamp is manufactured by Arisaka, LLC NOT by B&T Industries, LLC. All warranty issues are to be processed through Arisaka.
- Weight: 2.2 oz
- The BT21 Atlas TRG Bracket (ATB) is designed for use with the Sako TRG line of rifles that utilize the TRG bipod attachment slot with 0.42" hole spacing. The ATB provides a forward mounting position which is also closer to the bore-line.It is designed for use with either the 2-screw clamp (BT10, BT65, BT69, BT72) or quick detach lever (indicated by "LW17") models of Atlas Bipods, which would mount directly to the Picatinny Rail portion of the ATB.Although the No Clamp (NC) models can be mounted onto the ATB, it requires installation of the bipod during the installations of the ATB prior to reassembly of stock. THIS RESULTS IN A SEMI-PERMANENT, DEDICATION OF THE BIPOD TO THAT PARTICULAR RIFLE.The ATB is constructed from 6061-T6 Aluminum with a Type III hard anodized finish and heat treated alloy steel with a Manganese Phosphate finish. Available in black only. Fasteners included: two (2) M5 - .8 x 10” flat head socket cap screws, two (2) 10-32 x 3/4” flat head socket cap screws and two (2) 10-32 x 5/8” flat head socket cap screws
- Length: 3.83"
- Weight: 5.03 ounces
- Sold as a single 10-32 x 1.25" Clamp Bolt - Flat Head Fastener. The material is 4140 Alloy Steel with a manganese phosphate finish.Purchasing a quantity of two (2) 10-32 x 1.25" Clamp Bolts - Flat Head Fasteners would be ideal for use with any 2-screw clamp Atlas Bipod mounts (BT10, BT65, BT69, BT72).Purchasing a quantity of one (1) 10-32 x 1.25" Clamp Bolt - Flat Head Fastener would be ideal for use with any Precision Rail Mount (PRM) Accu-Shot Monopod (BT12, BT13, BT31).We have also used 10-32 x 1.25" Socket Cap Screws for contractual fulfillments available.
- The BT30-B Black Atlas Bipod Pouch accommodates all V8, Standard PSR and CAL model Atlas Bipods. They offer a pocket for the Atlas Leg Extensions and another for optional Atlas feet.It does NOT accept the 5-H, Super CAL or Tall PSR/models.Made out of 1000 denier cordura nylon. Also available in Coyote Brown and Ranger Green. Weight: 7.9 ounces
- The ARCALOCK Spigot Extension was designed for use with Area 419's ARCALOCK Clamp.Some ARMS17-S accessory with matching hole pattern of 1.100” such as American Defense's ADM-170-s, Arisaka's Picatinny Rail Slider or Really Right Stuff's BTC-Pro Bipod Clamp. However due to design, some clamps will NOT fit such as Magpul's QR Rail Grabber (MAG1196) and Really Right Stuff's SC-ARC Bipod Clamp.It is ideal to adapt our BT35-NC 5-H Atlas Bipod to an ARCA clamp for clearance of the cradle and operation of the clamp's knob. It will also extend all "NC" or No Clamp models (view complete list below) of Atlas Bipods out extra 1.25″ for increased stability. To use with your Bipod that already has a clamp, lever or mount installed, simply remove it to attach the spigot.This spigot is manufactured by Area 419 NOT by B&T Industries L.L.C. Includes two 10-32 x 3/8" flathead socket screws and two 10-32 x 5/8" flathead socket screws.
- Weight: 1.79 oz
- Dimensions: 3.2 × 1.24 × 0.35 in
- The BT56 LD-L 1/4-20 Lever Adapter is a Picatinny Rail mounting solution to interface between a Tripod or similar supporting device (shooting/walking/camera stick type monopod) with a standard ¼-20 threaded stud and a firearm with Picatinny Rail.Once the BT56 LD-L is installed on your supporting device using the ¼-20 threaded hole, your Picatinny Rail equipped Rifle, Pistol or Shotgun can be quickly mounted and held to your supporting device.This is a great option for getting added support for hunting and tactical situations where a bipod is not practical. The BT56 LD-L will hold your supporting device to the firearm for transitioning or relocation of firearm.It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. No hardware included. Available in black only.To order the without the installed ADM-170-S, view the BT56 LD 1/4-20 AdapterWeight: 2.7 ounces
- The BT56 LD 1/4-20 Adapter is a mounting solution to interface between a Tripod or similar supporting device (shooting/walking/camera stick type monopod) with a standard ¼-20 threaded stud and a firearm.Once the BT56 is installed on your supporting device using the ¼-20 threaded hole found on the BT56, the other side will accept ant 17S size Picatinny lever or ARCA mount with the matching two hole pattern of 1.100” and 10/32 threaded holes. After completed with a mount or your choice, your Picatinny or ARCA rail equipped Rifle, Pistol or Shotgun can be quickly mounted and held to your supporting device.This is a great option for getting added support for hunting and tactical situations where a bipod is not practical. The BT56 LD will hold your supporting device to the firearm for transitioning or relocation of firearm.It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. No hardware included. Available in black only.The Picatinny Rail lever mount is NOT included. However, the BT56 LD and ADM-170-S can be ordered together as our BT56 LD-L. Other compatible options we currently offer are Area 419's ARCALOCK Clamp and Arisaka's Picatinny Rail Slider.Weight: 0.8 ounces
- The BT30-R Ranger Green Atlas Bipod Pouch accommodates all V8, Standard PSR and CAL model Atlas Bipods. They offer a pocket for the Atlas Leg Extensions and another for optional Atlas feet.It does NOT accept the 5-H, Super CAL or Tall PSR/CAL models.Made out of 1000 denier cordura nylon. Also available in Coyote Brown and Black. Weight: 7.9 ounces
- BT78: SIG SAUER® CROSS™ Buttstock Rail Kit is a 2.05" 1913 Picatinny Rail that installs directly onto the folding buttstock of the SIG SAUER® CROSS™ rifle to allow for mounting our Accu-Shot Precision Rail Monopods (BT12-QK, BT13-QK and BT31-QK).Installation requires two factory 10-24 threaded holes spaced approximately 1.57" apart as found on our sample SIG SAUER® CROSS™. No modification is required. Comes with two 10-24 x 3/4" flat socket cap screws as seen. Use of a thread locker upon installation is suggested.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.Weight: 0.56 ouncesLength: 2.05"
- The BT6569ML and BT6569ML-NC are current production CAL mounts that provide 63 degrees of Cant. Additional Cant is considered an upgrade (see illustrations to determine which mount you have).The additional degrees of Cant was requested by a member of the SOF community and longtime user of B&T products.Variation differences and compatibility detailed in description below.
- CLOSEOUT SALE. Limited availability.The Gen. 1 BT27 Folding Foregrip offers two opposing flat surfaces to secure light switches with the installed Buna O-Rings. Removing the bottom cap will reveal a storage compartment designed to hold a single 123 battery. The unique design protects the battery from being drained by placing the positive side (+) towards the relieved cap.When folded, the profile is reduced for a cleaner presentation for lower rifle positions as well as reducing the stop or snag point found with fixed vertical fore-grips. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
- Deployed Length: 4.15”
- Folded Length: 4.3”
- Weight: 7.3 ounces
- The ADM-5-H Lever base is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems. It has two hole pattern of 1.100”. This lever is manufactured by American Defense Manufacturing and NOT by B&T Industries L.L.C. This custom made lever is made to work with the 5-H Atlas Bipod only.Weight: 1.89 ounces
- The BT33 Tube Rail Kit consists of a Steel Bar Nut, designed to fit inside free float tubes, and a low profile 1913 Picatinny rail 2.05" long with a 1.00" radius back and a center-to-center spacing of 1.602 between the holes.The BT33 is installed with the Steel Bar Nut inside the free float tube and the 1913 Picatinny rail on the outside with the matching holes aligned. Fastened together, they allow the attaching of the Atlas Bipod or other accessories to free float tubes.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Manganese phosphate finish on the steel bar nut. Hardware included. Available in black only.
- Length: 2.05"
- Weight: 1.3 ounces
- The BT54 Flushcup Stud is a novel means to quickly install, move or remove accessories to a Picatinny rail, IF the accessory has a corresponding flushcup hole that aligns with the slots of the Picatinny rail. The BT54 was conceived and designed for use with our BT53 SILO. Available in black only.Weight: 1.0 ounce
- The BT53 SILO is a novel and patented product that attaches by means of a Picatinny rail. It provides a textured front that can be pressed into barricades, rubber side bars for “soft” side bracing and grip, 600 denier cordura "bean-bag" bottom for “soft” interface on ledges, windows etc. and two flush cups.One of the two flush cups is designed to accept our novel BT54 Flush Cup Stud (NOT included with purchase of a BT53). It is an option sold separately that allows the BT53 SILO to be easily installed, moved and removed with the push of a button.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized.
- Length Approx: 3.75"
- Width Approx: 2.36"
- Height Approx: 1.78"
- Weight: 7.8 ounces
- The BT03 M1-A/AR-15 Sling Stud Accessory replaces the standard Sling Loop found on many standard military style rifle stocks including the AR10, AR15 and M1A. Machined steel. Available in black only.Weight: 0.3 ounces
- The BT63 Nose Rail fulfills the desire to get bipods further forward and closer to the bore. Inspired to raise the bipod’s Apex, the “Nose Rail” is designed to be bedded into a channel in the stock with threaded holes for attaching a second rail or sling studs to the bottom of stock.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. NO HARDWARE INCLUDED. Available in black only.
- Overall Length: 7.0"
- Picatinny Rail Section Length: 2.0"
- Center-to-center Hole Spacing: 3" and 3.75"
- Weight: 2.6 ounces
- The BT20 Atlas Accuracy International Spigot (AAIS) Rail Set consists of three pieces of 1913 rail that can be attached to the BT19 AAIS on the bottom and both sides. This accommodates for a multitude of options including the mounting of any rail mounted Atlas Bipod.For the bottom rail only, check out our BT20-B.Each rail is machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only. Includes four (4) 10-32 x 5/8" flat head socket cap screws.
- Length: 1.6" each
- Weight: 2.2 ounces
