- The ADM-170-S base is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems. It has two hole pattern of 1.100”.This lever is manufactured by American Defense MFG, LLC NOT by B&T Industries, LLC and is used on our V8, PSR, CAL and Super CAL models of Atlas Bipods. All warranty issues are to be processed through American Defense MFG, LLCWeight: 1.905 ounces
- The BT73 M-LOK® Rail is designed for use with all M-LOK compatible hand guards, forends and buttstocks. It has 3 usable slots for attaching any of our 1913 Picatinny rail mounted Atlas Bipods, Accu-Shot Monopods or Folding Foregrip. It requires standard M-LOK sized slots for mounting.Machined from 6061-T6 aluminum and Type III hard coat anodized. It comes with two 10-24 x 3/8 fasteners and two M-LOK nuts. Available in black only.
- Length: 1.575"
- Width: 0.835"
- Weight: 0.59 oz
For a direct M-LOK to "NC" (No Clamp) Atlas Bipod interface, check out our BT70: Atlas M-LOK® Adapter - The BT28 AFAR Rail Kit will mount into accessory rails and provide a low profile 1913 Picitinny rail for attaching the Atlas Bipods or other accessories. This is a great option for shooters that have accessory rails and want to use their rail mounted Atlas on several rifles.The uniquely designed rectangle nuts (BT28-N) fit both Freeland and Anschutz style rails by rotating them 90°.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish with 4041 Alloy Steel fasteners. Includes two rectangle nuts, two (2) 10-32 x 3/8" flat head socket cap screws and two (2) 10-32 x 1/2" flat head socket cap screws. Available in black only.
- Length: 2.05"
- Weight: 0.89 ounces
- The BT22 Atlas Leg Extensions are easily installed to any V8, PSR or CAL series Atlas Bipod with the press of a stainless steel plunger. They provide an additional 3 inches of elevation and accept any of our optional V8, PSR or CAL feet. They will also fit bipods/adapters that use Atlas feet. Sold as a pair. Available in black only. NSN 1005-01-641-0369Total Weight of Pair: 1.8 ounces
Product will work on V8, PSR and CAL models only.
- "Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction. If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure. Introducing the ARCALOCK Dovetail Rail System." - Area 419The ARCALOCK Clamp works on all standard ARCA/1.5" dovetail rails. It will bolt directly to any "NC" (No Clamp) style of Atlas Bipods (except the 5-H which requires Extension Spigot for compatibility). Compatible Atlas Bipod models listed below.It will also bolt directly to our BT20-B Bottom Picatinny Rail and BT56LD 1/4-20 Lever Adapter.The ARCALOCK Clamp features a proprietary two-stage screw design. Both the Clamp and Knob are machined from 6061-T6 Aluminum with Type III Hardcoat black anodized Clamp and Knob. The screw is turned from 303 stainless steel.This clamp is manufactured by Area 419 NOT by B&T Industries L.L.C. All warranty issues are to be processed through Area 419. NO HARDWARE INCLUDED.
- Weight: 2.5 oz
- The BT32 Atlas Standard Rubber Feet are standard equipment on all V8, PSR or CAL series Atlas Bipods. They will also fit bipods/adapters that use Atlas feet. Easily installed with the press of a stainless steel plunger. Sold as a pair. Available in black only.Weight: 1.0 ounce
- The BT34 - 2.05" 1913 Picatinny Rail has a center to center spacing of 1.6". Two machine screws can be used not included, see BT1517) to attach this rail to the forearm of standard rifle stocks. It can also be attached to a horizontal surface on the Butt section to attach our Precision Rail Monopods.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. NO HARDWARE INCLUDED. Available in black only.Weight: 0.4 ounces
- The BT81 Lil’ Brandi is our long awaited answer to getting a 1913 Picatinny Rail mounted on a traditional rifle stock without taking the rifle apart, drilling holes or damaging the stock. Installation utilizes the existing sling stud and provided cross pin, set screw and hex wrench.It features 3 usable slots for attaching any rail mounted Atlas Bipod and a sling attachment to utilize a sling if desired. The angular wings with rubber pads contact the stock. Machined to Picatinny rail standards from 7075-T6 aluminum with Mil-Spec Type III Class 2 finish. No disassembly required. Patent Pending.Not intended for use with flat stocks (reference fourth and fifth image). If the stock has two sling studs, we strongly recommend using our BT15 or BT17
- Dimensions: 1.95 x 1.5 x 0.663 in
- Weight: 0.89 ounces
- The BT74 Atlas Raider Cleat Feet are turned from 303 Stainless Steel bar stock in one piece for strength and durability. They will fit V8, PSR and CAL series of Atlas Bipods. They will also fit bipods/adapters that use Atlas feet. Easily installed with the press of a stainless steel plunger.The Cleat portion is approximately 1.000” long with the largest outer diameter of approximately 1.155”. Sold as a pair. Available in raw stainless steel only.NSN 1005-01-700-6502Total Weight of Pair: 2.6 ouncesProduct will work on V8, PSR and CAL models only.
- The BT70 Atlas M-LOK® Adapter is an interface between all Atlas bipods with the “NC” designator in their names (BT10-NC, BT46-NC, BT47-NC, BT35-NC, BT65-NC, BT69-NC, BT72-NC) and M-LOK style mounting systems. It requires two (2) M-LOK standard sized slots for mounting.Machined from 6061-T6 aluminum and Type III hard coat anodized and comes with two 3/8 fasteners and two M-LOK nuts. Available in black only.
- Length: 3.15"
- Width: 1.11"
- Weight: 1.1 oz
For an M-LOK to Picatinny rail attachment, check out our BT73: M-LOK® Rail - The BT1517 Rail Mounting Fastener Set is used for mounting 1913 rails and consists of two (2) 10-32 T-Nuts and two (2) 10-32 x ¾" Button Head Cap Screws. Sold as a pair.These T-nuts are commonly used by stock builders to accommodate the installation of sling studs and rails. They are typically bedded into the stock from the barrel channel side as illustrated in the third image.Weight: 0.4 ounces
- The BT15 - 3.35" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 1.76 – 2.78" and a relieved back to accommodate curved surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels and sling studs (neither provided).A standard sling stud and sling stud spacer can be used as one fastener or two button head machine screws can be used. NO HARDWARE INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks. Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.Weight: 0.92 ounces
- The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels and sling studs (neither provided).A standard sling stud and sling stud spacer or two button head machine screws can be used as a fastener. NO HARDWARE INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks. Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.Weight: 1.20 ounces
