- Overall Length: 1.625"
- Length of Threaded Portion: 0.625"
- Length of Shaft Overall: 1.25"
- Weight: 0.5 ounces
- The BT14 Magpul PRS Threaded Sling Studs replace one of the four Socket Button Head Cap Screws found on the Magpul Precision Rifle Stock (PRS) with a sling stud. The threaded straps that come standard with the PRS can be reversed giving a total of 8 choices for stud placement. Each BT14 comes with two Sling Studs having 10-24 threads and black polymer spacers.
- The BT45 Savage 110BA Fore-end Rail (SFR) will mount using the existing Sling Stud bracket holes on the Savage 110BA fore-end without modification. Once installed it will provide a low profile 1913 Picatinny rail for attaching the Atlas Bipod or other accessories to your Savage 110BA.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish with 4041 Alloy steel fasteners having a Manganese Phosphate finish. Available in black only.The newer version of the Savage 110BA has a different hole spacing with a single hole and slots. We strongly recommend confirming the center-to-center hole spacing of 0.506" to ensure proper fit of the BT45. See image.
- Length: 1.6"
- Weight: 0.8 ounces
- The BT29 Sako TRG Rail Kit comes complete and ready to install onto your TRG stock. The kit allows for the installation of the BT12-QK Accu-Shot Precision Rail Monopod (BT12-QK is shown but not included). It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only. Weight: 1.15 ouncesInstallation of the BT29 REQUIRES the temporary removal of the butt pad assembly and drilling of a second hole. Although, this can be accomplished with common hand tools, B&T Industries L.L.C. strongly recommends a competent Gunsmith install the BT29 Sako TRG Rail Kit.
- The BT79 Barrett® M107A1® Rail is a 5-slotted 1913 Picatinny rail for direct installation to the Barrett® M107A1® providing the means to mount our Atlas Bipod Picatinny rail mounted bipods. It is also compatible with the Barrett® M82A1®.The center-to-center hole spacing of 3.359" fits the outer two holes of the existing three holes in the chassis. We strongly suggest that you measure the hole spacing on your rifle.The center section is machined to Picatinny rail standards from 4140 cold finished steel with a maganese phosphate finish. Two 3/8-16 x 3/4” flat head cap screws are provided.The original 11/16" nuts and tooth lock washers are reused to complete assembly. An 11/16" socket and ratchet wrench OR break-over bar and a 7/32” hex wrench is required for installation (none included). Check out installation instruction below. No modification needed.
- Overall Length: 4.309"
- Weight: 5.22 ounces
- The BT52 ACS/STR Picatinny Rail Adaptor for the popular Magpul ACS and STR style stocks provides the means to attach an Accu-Shot Precision Rail Monopod (BT12-QK, BT13-QK and BT31-QK) to your Magpul ACS and STR Stock. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized and steel. The two piece adaptor replaces the polymer insert found on these stocks and is held in place with the supplied fasteners. Other than removing the buttpad and sliding the insert out, no modification is required. A 1/8 hex wrench is required but NOT included. Available in black only.Weight: 1.0 ounce
- The M6 x 80 x 100 Long Bolt is compatible with both the BT08-QK Accu-Shot Accuracy International (ASAI) Monopod and BT57-QK Accu-Shot Accuracy International AT Monopod.It is required if additional length of pull spacers are used with Accuracy International buttstocks that our BT08-QK and BT57-QK are being installed on.If you are needing a replacement standard bolt, see our BT0857-B: M6 x 80 x 80 Replacement Bolt
- The M6 x 80 x 80 Replacement Bolt is the same bolt we send standard with both the BT08-QK Accu-Shot Accuracy International (ASAI) Monopod and BT57-QK Accu-Shot Accuracy International AT Monopod.Available as a replacement.If additional length of pull spacers are being used, see our BT0857-LB: M6 x 80 x 100 Long Bolt
- The BT51 ACE bracket was designed for the popular A.C.E. Skeleton Stock and provides the means to attach an Accu-Shot Precision Rail Monopod (BT12-QK, BT13-QK and BT31-QK) to your A.C.E. Skeleton Stock. It is machined from 6061-T6 aluminum Mil-Spec Type III hard anodized. Besides the Picatinny rail for the PRM, the BT51 has two flush cups for attaching slings. The two piece bracket is clamped to the angular tube and is held in place with the four supplied SHCS fasteners. No modification is required. A 5/32 hex wrench is required but NOT included. Available in black only.Weight: 2.9 ounces
- B&T Industries L.L.C. is proud to create a letter opener for our customers that want to have a serious desktop accoutrement with purpose and function. We machined the Handle and Pommel from 300 series Stainless Steel then tumbled to compliment the blade. The blade, made by Spartan Blades, is machined from 440C Stainless Steel given a Rockwell Hardness of C 58-59 with a Cyro treatment followed by Alumina then Ceramic Blast and finally a PVD Chromium coating.The two Buna o-rings prevent rattling when sheathed for a stealthy presentation. The double ground edges along the length of the blade are not sharp, but the point is sharp. More specification and details below.
- The BT39 AI Monopod Bracket (AIMB) is an adapter required to attach the BT08-QK ASAI monopod (used with the original “legacy” AI style stocksides) to the new Accuracy International “Gen 2” style stocksides. It is machined from 4140 steel with a manganese phosphate finish. Modification to the Buttstock Stocksides (skins) is required to accept the BT39 AIMB.The BT39 AIMB is mounted to the AI frame using your existing BT08 Stock Collar Fastener (this fastener is not included in the BT39, it is included with the BT08) being threaded to the lower AI butt pad bolt. The BT08 is then attached to the BT39 AIMB by means of the supplied 5/16-24 socket head cap screw.Weight: 5.4 ounces
- The BT26 CAR Adaptor installed on your CAR collapsible stock allows any of our Precision Rail Monopod style monopods to be installed. This is a great option for shooters that want the LOP adjustments available with a collapsible stocks, but want the stability provided by the Accu-Shot. The BT26 replaces the factory loop on the stock while providing the means to re-attach the fixed sling loop with the loop on the left, right or bottom angled forward or backward. It is made of 1018 Cold Rolled Steel and treated with magnesium phosphate. Available in black only.Weight: 1.1 ounce
- B&T Industries L.L.C. is proud to offer our Bitter & Twisted Mortar model display. The mortar model is constructed from turned and stamped Stainless Steel and quarter sawn American White Oak.The Mortar Barrel and Pinions are turned from 303 stainless steel bar stock with bored trunnion pockets. The trunnions are pressed into the pockets then welded in place. They rest on a pair of stainless steel bearing plates in the Mortar model Base and is retained by a pair of Stainless Steel Top Straps via two ¼-20 Stainless Steel Button Head cap screws per strap. They pass through the straps then into the side and thread into the Stainless Steel handle found on each Side of the Base. Strength is obtained and secured by steel on steel threads.
