- The BT32 Atlas Standard Rubber Feet are standard equipment on all V8, PSR or CAL series Atlas Bipods. They will also fit bipods/adapters that use Atlas feet. Easily installed with the press of a stainless steel plunger. Sold as a pair. Available in black only.Weight: 1.0 ounce
- The BT74 Atlas Raider Cleat Feet are turned from 303 Stainless Steel bar stock in one piece for strength and durability. They will fit V8, PSR and CAL series of Atlas Bipods. They will also fit bipods/adapters that use Atlas feet. Easily installed with the press of a stainless steel plunger.The Cleat portion is approximately 1.000” long with the largest outer diameter of approximately 1.155”. Sold as a pair. Available in raw stainless steel only.NSN 1005-01-700-6502Total Weight of Pair: 2.6 ouncesProduct will work on V8, PSR and CAL models only.
- The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL series Atlas Bipod with the press of a stainless steel plunger. They will lay flat in the 90 degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod. They will also fit bipods/adapters that use Atlas feet. Sold as a pair. Available in black only. NSN 1005-01-640-8881Total Weight of Pair: 1.5 ounces
Product will work on V8, PSR and CAL models only.
- The BT6569ML and BT6569ML-NC are current production CAL mounts that provide 63 degrees of Cant. Additional Cant is considered an upgrade (see illustrations to determine which mount you have).The additional degrees of Cant was requested by a member of the SOF community and longtime user of B&T products.Variation differences and compatibility detailed in description below.
- The BT22 Atlas Leg Extensions are easily installed to any V8, PSR or CAL series Atlas Bipod with the press of a stainless steel plunger. They provide an additional 3 inches of elevation and accept any of our optional V8, PSR or CAL feet. They will also fit bipods/adapters that use Atlas feet. Sold as a pair. Available in black only. NSN 1005-01-641-0369Total Weight of Pair: 1.8 ounces
Product will work on V8, PSR and CAL models only.
- Sold as a single 10-32 x 1.25" Socket Cap Screw.Purchasing a quantity of two (2) 10-32 x 1.25" Socket Cap Screws would be ideal for use with any 2-screw clamp Atlas Bipod mounts (BT10, BT65, BT69, BT72). These are what we have used for contractual fulfillments.Purchasing a quantity of one (1) 10-32 x 1.25" Socket Cap Screw would be ideal for use with any Precision Rail Mount (PRM) Accu-Shot Monopod (BT12, BT13, BT31).
- Sold as a single 10-32 x 1.25" Clamp Bolt - Flat Head Fastener. The material is 4140 Alloy Steel with a manganese phosphate finish.Purchasing a quantity of two (2) 10-32 x 1.25" Clamp Bolts - Flat Head Fasteners would be ideal for use with any 2-screw clamp Atlas Bipod mounts (BT10, BT65, BT69, BT72).Purchasing a quantity of one (1) 10-32 x 1.25" Clamp Bolt - Flat Head Fastener would be ideal for use with any Precision Rail Mount (PRM) Accu-Shot Monopod (BT12, BT13, BT31).We have also used 10-32 x 1.25" Socket Cap Screws for contractual fulfillments available.
- Sold as a single 10-32 x 3/8" Flathead Socket Screw.These are the same screws that come installed on all "NC" (No Clamp) models of Atlas Bipods.
- The BT54 Flushcup Stud is a novel means to quickly install, move or remove accessories to a Picatinny rail, IF the accessory has a corresponding flushcup hole that aligns with the slots of the Picatinny rail. The BT54 was conceived and designed for use with our BT53 SILO. Available in black only.Weight: 1.0 ounce
- The BT53 SILO is a novel and patented product that attaches by means of a Picatinny rail. It provides a textured front that can be pressed into barricades, rubber side bars for “soft” side bracing and grip, 600 denier cordura "bean-bag" bottom for “soft” interface on ledges, windows etc. and two flush cups.One of the two flush cups is designed to accept our novel BT54 Flush Cup Stud (NOT included with purchase of a BT53). It is an option sold separately that allows the BT53 SILO to be easily installed, moved and removed with the push of a button.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized.
- Length Approx: 3.75"
- Width Approx: 2.36"
- Height Approx: 1.78"
- Weight: 7.8 ounces
- When a member of a government agency asked us why the BT27 did not offer a 45 degree position, we did not have an answer. Now it does! The newly redesigned BT27 Folding Foregrip offers two opposing flat surfaces to secure light switches with the installed Buna O-Rings. Removing the bottom cap reveals a storage compartment designed to hold a single 123 battery. The unique design protects the battery from being drained by placing the positive side (+) towards the relieved cap. We also trimmed the handle to decrease weight while maintaining battery storage and touch pad retainers. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
- Deployed Length: 4.073"
- Folded Length: 4.032"
- Weight: 5.2 ounces
- The BT81 Lil’ Brandi is our long awaited answer to getting a 1913 Picatinny Rail mounted on a traditional rifle stock without taking the rifle apart, drilling holes or damaging the stock. Installation utilizes the existing sling stud and provided cross pin, set screw and hex wrench.It features 3 usable slots for attaching any rail mounted Atlas Bipod and a sling attachment to utilize a sling if desired. The angular wings with rubber pads contact the stock. Machined to Picatinny rail standards from 7075-T6 aluminum with Mil-Spec Type III Class 2 finish. No disassembly required. Patent Pending.Not intended for use with flat stocks (reference fourth and fifth image). If the stock has two sling studs, we strongly recommend using our BT15 or BT17
- Dimensions: 1.95 x 1.5 x 0.663 in
- Weight: 0.89 ounces
- CLOSEOUT SALE. Limited availability.The Gen. 1 BT27 Folding Foregrip offers two opposing flat surfaces to secure light switches with the installed Buna O-Rings. Removing the bottom cap will reveal a storage compartment designed to hold a single 123 battery. The unique design protects the battery from being drained by placing the positive side (+) towards the relieved cap.When folded, the profile is reduced for a cleaner presentation for lower rifle positions as well as reducing the stop or snag point found with fixed vertical fore-grips. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
- Deployed Length: 4.15”
- Folded Length: 4.3”
- Weight: 7.3 ounces
