- The US10 ELC (Extremely Large Cards) - These oversized U.S. Sniper Calling Cards were created through our sponsorship of ELR (Extreme Long Range) competitions where the cards are shot beyond 1000 yards.The US10 ELC features our “Ace of Spades” logo printed with black thermography on heavy card stock just like the original US08 cards used for the Accu-Shot One-Shot Challenges™. They are blank on the back and measure 11 x 8.5".Quantity 1 = 10 individual cards for $15.95
- U.S. Snipers Sign reads, “No Trespassing Live Fire Range.” It measures 10 x 14" with two 1/4" holes centered top and bottom and are .063 thick Aluminum with a reflective background.
- These started it all. The U.S. Snipers Calling Cards featuring our “Ace of Spades” logo printed with black thermography on heavy cardstock. Same cards used for the Accu-Shot One-Shot Challenges™. They are blank on the back and measures 2.5 x 3.5".Quantity 1 = 20 individual cards for $5.95
- Appears as the US08: U.S. Snipers Death Calling Card, but are stickers with adhesive on the back.Quantity 15 for $5.00
- U.S. Snipers Poker Playing Cards appear similar to the US08: U.S. Snipers Death Calling Card, but with playing card faces.
- This poster is a battle field photo showing a U.S. Special Forces Sniper in a hide in An Najaf. He was using a 55 gallon drum and a piece of wood for a table, the light coming through the spider hole is the only illumination in this dark and dangerous setting, fitting for the; "Yea, though I walk through the valley of the shadow of death" 23 Psalms. Printed on 100# cover stock. Measures 16 x 20" and is sized ready to frame in a standard frame.
- Sand Gildan 100% cotton T-shirt with line art on the back of a SF sniper in Fallujah with text, “Converting terrorist one bullet at a time.” Features 3” round US Snipers logo on front left chest. Line art measures about 14” wide and created by a young lady free hand from a photo supplied by a member of the Special Forces.
- Black Gildan 100% cotton T-shirt with U.S. Snipers Spade logo on back measuring about 12” high with a small 3” round U.S. Snipers logo on front left chest. The spade logo was a co-op job. Mike McMillan of CSM Gear suggested using the spade and our artist came up with the lettering and design.
- This image is a print from the actual negative, no different than the one featured in the battle photograph. These are die cut at 1.5" in diameter and come ready to install.
Ships unassembled for coating.
Since B&T Industries introduced the Atlas Bipod in 2006, the shooting community found a usefulness in its patented, novel features. We began receiving requests for a "bigger," "heavier," "stouter" bipod with the same features. The BT35-LW17 5-H Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-5-H Lever. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components.- Height Range: 5.5–10.5"
- Pan: 30 degrees
- Cant: 30 degrees
- Pan and Cant can be locked out at top dead center
- Pan and Cant Tension Wheel has Detent adjustability and Cam-Lock
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Weight: 27.52 ounces approx.
- Footprint: 14.5–19.5"
Ships unassembled for coating.
Since B&T Industries introduced the Atlas Bipod in 2006, the shooting community found a usefulness in its patented, novel features. We began receiving requests for a "bigger," "heavier," "stouter" bipod with the same features. The BT35-NC 5-H Atlas Bipod "No Clamp" has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires the 5-H ADM 4103LA74 Lever or any Arca dovetail mount with knob tensioner and same hole pattern. The BT35-NC will also mount to include our BT19 (AI) and BT21 (TRG) spigots. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components.- Height Range: 5.5–10.5"
- Pan: 30 degrees
- Cant: 30 degrees
- Pan and Cant can be locked out at top dead center
- Pan and Cant Tension Wheel has Detent adjustability and Cam-Lock
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Weight: 25.74 ounces approx.
- Footprint: 14.5–19.5"
Ships unassembled for coating.
The BT72-LW17 Super CAL (Cant And Loc) Atlas Bipod does not PAN. This model mounts directly to any 1913 style Picatinny rail via the included ADM-170-S Lever. Includes patented 45° leg positions, non-rotating legs, optional quick change feet and “Hold What You Move Technology®.”It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and has heat treated stainless steel components. We choose to support a legend in the shooting sports by using the original KMW “Pod-Loc®.” Read how to adjust the Pod-Loc® lever below.- Height Range: 5.875-11.125" (7.66” at 90°)
- Cant: 45 degrees
- Position Button: 0.5" diameter
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Weight: 23.16 ounces
- Footprint: 14.75-19.37"
Ships unassembled for coating.
The BT72-NC Super CAL (Cant And Loc) Atlas Bipod does not PAN. This "No Clamp" model has a two hole pattern of 1.100” with 10/32 threaded holes. It requires any 17S size ”Lever Mount” such as the ADM-170-S, ARMS 17S, LT271 or any ARCA dovetail mount with the same hole pattern. The BT72-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.Includes patented 45° leg positions, non-rotating legs, optional quick change feet and “Hold What You Move Technology®.” It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and has heat treated stainless steel components. We choose to support a legend in the shooting sports by using the original KMW “Pod-Loc®.” Read how to adjust the Pod-Loc® lever below.- Height Range: 5.75-10.87" (7.41” at 90°)
- Cant: 45 degrees
- Position Button: 0.5" diameter
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Weight: 21.3 ounces
- Footprint: 14.75-19.37"
Ships unassembled for coating.
The BT72 Super CAL (Cant And Loc) Atlas Bipod does not PAN. This model mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly. Includes patented 45° leg positions, non-rotating legs, optional quick change feet and “Hold What You Move Technology®.”It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and has heat treated stainless steel components. We choose to support a legend in the shooting sports by using the original KMW “Pod-Loc®.” Read how to adjust the Pod-Loc® lever below.- Height Range: 5.75-10.87" (7.46” at 90°)
- Cant: 45 degrees
- Position Button: 0.5" diameter
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Weight: 21.54 ounces
- Footprint: 14.75-19.37"
Ships unassembled for coating.
The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature.The BT69-LW17 mounts directly to any 1913 style Picatinny rail via the included ADM-170-S Lever. It is comprised of 6061-T6 aluminum, except the inner legs which are made from 7075-T6 aluminum, Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. We chose to support a legend in the shooting sports by using the original KMW “Pod-Loc®.”- Height Range: 6-12.25”
- Cant: 45 degrees
- 5 leg positions: 0, 45, 90, 135 & 180°
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 16.1 ounces
- Footprint: 9.25-16.5”
Ships unassembled for coating.
The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature.The BT69-NC Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any ARCA dovetail mount with the same hole pattern. The BT69-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.It is comprised of 6061-T6 aluminum, except the inner legs which are made from 7075-T6 aluminum, Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. We chose to support a legend in the shooting sports by using the original KMW “Pod-Loc®.”- Height Range: 6-12.25”
- Cant: 45 degrees
- 5 leg positions: 0, 45, 90, 135 & 180°
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 14.2 ounces
- Footprint: 9.25-16.5”
Ships unassembled for coating.
The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature.The BT69 mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly. It is comprised of 6061-T6 aluminum, except the inner legs which are made from 7075-T6 aluminum, Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. We chose to support a legend in the shooting sports by using the original KMW “Pod-Loc®.”- Height Range: 6-12.25”
- Cant: 45 degrees
- 5 leg positions: 0, 45, 90, 135 & 180°
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 14.5 ounces
- Footprint: 9.25-16.5”
Ships unassembled for coating.
The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature.The BT65-LW17 mounts directly to any 1913 style Picatinny rail via the included ADM-170-S Lever. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. We chose to support a legend in the shooting sports by using the original KMW “Pod-Loc®.”- Height Range: 4.75–9.0"
- Cant: 45 degrees
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 14.57 ounces
- Footprint: 9–12.5"
Ships unassembled for coating.
The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size ”Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any Arca dovetail mount with the same hole pattern. The BT65-NC will also mount directly to our BT19 (AI) and BT21 (TRG) spigots. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only. We chose to support a legend in the shooting sports by using the original KMW “Pod-Loc®.”- Height Range: 4.75–9.0"
- Cant: 45 degrees
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 12.65 ounces
- Footprint: 9–12.5"
Ships unassembled for coating.
The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature.The BT65 mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. We chose to support a legend in the shooting sports by using the original KMW “Pod-Loc®.”- Height Range: 4.75–9.0"
- Cant: 45 degrees
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 12.87 ounces
- Footprint: 9–12.5"
Ships unassembled for coating.
The BT57-QK Accu-Shot Accuracy International AT (ASAIAT) Monopod is designed specifically to fit the Accuracy International Accuracy Tactical Rifle (AT) and Accuracy Tactical Accuracy International Chassis Systems (ATAICS). Also Known as the Gen. 2 stocks. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized.- Elevation Range: 3.00 - 4.15”
- Folded Length: 4.10" approximate
- Weight: 8.5 ounces
Ships unassembled for coating.
The BT47-LW17 PSR (Precision Sniper Rifle) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever. It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR).- Height Range: 7–13"
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- Fore and Aft pivot limiting Bosses
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 15.13 ounces approx.
- Footprint: 10-14.5"
Ships unassembled for coating.
The BT47-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any ARCA dovetail mount with the same hole pattern. The BT47-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR).- Height Range: 7–13"
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- Fore and Aft pivot limiting Bosses
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 12.86 ounces approx.
- Footprint: 10-14.5"
Ships unassembled for coating.
The BT46-LW17 PSR (Precision Sniper Rifle) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever. It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. The BT46-LW17 was selected for the SOCOM PSR (Precision Sniper Rifle) Weapons System.- Height Range: 5–9"
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- Fore and Aft pivot limiting Bosses
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 13.61 ounces approx.
- Footprint: 8–11"
Ships unassembled for coating.
The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any ARCA dovetail mount with the same hole pattern. The BT46-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR).- Height Range: 5–9"
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- Fore and Aft pivot limiting Bosses
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 11.42 ounces approx.
- Footprint: 8–11"
Ships unassembled for coating.
The BT31-QK is our extended height Precision Rail Monopod (PRM) with QK03 Quick Knob. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized.- Elevation Range: 5.65 – 6.60"
- Folded Length: 5.80" approximate
- Weight: 9.0 ounces
Ships unassembled for coating.
The BT13-Qk is our mid-height Precision Rail Monopod (PRM) with QK02 Quick Knob. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized.- Elevation Range: 4.75 – 5.65”
- Folded Length: 4.80" approximate
- Weight: 8.3 ounces
Ships unassembled for coating.
The BT12-QK is our standard height Precision Rail Monopod (PRM) with QK01 Quick Knob. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized.- Elevation Range: 3.75 – 4.65”
- Folded Length: 3.85" approximate
- Weight: 7.4 ounces
Ships unassembled for coating.
The BT10-LW17 V8 Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components.- Height Range: 5–9"
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Weight: 12.7 ounces approx.
- Footprint: 8–11"
Ships unassembled for coating.
The BT10-NC V8 Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any Arca dovetail mount with the same hole pattern. The BT10-NC will also mount directly to our BT19 (AI) and BT21 (TRG) spigots. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components.- Height Range: 5–9"
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Weight: 10.8 ounces approx.
- Footprint: 8–11"
Ships unassembled for coating.
The BT10 V8 Atlas Bipod mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Selected for SOCOM MK14 MOD 2. NSN 1005-01-601-000.- Height Range: 5–9"
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Weight: 11.0 ounces approx.
- Footprint: 8–11"
Ships unassembled for coating.
The BT06-QK is our extended height Sling Stud Mount with QK03 Quick Knob. Additional Thumbnut installed to LOCK the unit into a fixed elevation. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized.- Elevation Range: 5.70 – 6.85”
- Folded Length: 5.95" approximate
- Weight: 9.0 ounces
Ships unassembled for coating.
The BT05-QK is our mid-height Sling Stud Mount with QK02 Quick Knob. Additional Thumbnut installed to LOCK the unit into a fixed elevation. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized.- Elevation Range: 4.80 – 5.85"
- Folded Length: 4.95" approximate
- Weight: 8.2 ounces
Ships unassembled for coating.
The BT04-QK is our standard height Sling Stud Mount with QK01 Quick Knob. Additional Thumbnut installed to LOCK the unit into a fixed elevation. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized.- Elevation Range: 3.75 – 4.85”
- Folded Length: 3.95"
- Weight: 7.3 ounces
Ships unassembled for coating.
The BT01-QK is our standard height Sling Stud Mount with QK01 Quick Knob. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized.- Elevation Range: 3.50 – 4.65"
- Folded Length: 3.65" approximate
- Weight: 6.5 ounces
- For anyone that wishes to apply a finish to a currently owned B&T Atlas Bipod:When applying an aftermarket finish that requires the use of heat or disassembly to any B&T Atlas Bipod, we respectfully ask that you send that product to us so we can properly disassemble and return all appropriate parts to you for application of the finish.Once the finish is applied and the parts are returned to B&T, we will reassemble them to our specifications and ship it back to you. Please ensure parts are packaged appropriately to avoid any damage in transit. B&T will not be responsible for the finish or any damage to the finish.Anyone that disassembles, loses or breaks any parts in an attempt to disassemble/reassemble their Atlas Bipod will be charged $105.00 plus parts minimum.Anyone choosing not to use this service does so at their own risk and liability voiding the bipod's Lifetime Warranty.B&T Industries L.L.C. does not sell or ship parts.
- For anyone that wishes to apply a finish to a currently owned B&T Accu-Shot Monopod:When applying an aftermarket finish that requires the use of heat or disassembly to any B&T Accu-Shot Monopod, we respectfully ask that you send that product to us so we can properly disassemble and return all appropriate parts to you for application of the finish.Once the finish is applied and the parts are returned to B&T, we will reassemble them to our specifications and ship it back to you. Please ensure parts are packaged appropriately to avoid any damage in transit. B&T will not be responsible for the finish or any damage to the finish.Anyone that disassembles, loses, breaks parts in an attempt to disassemble or cannot reassemble their Accu-Shot Monopod will be charged $75.00 plus parts minimum.Anyone choosing not to use this service does so at their own risk and liability voiding the monopod's Lifetime Warranty.B&T Industries L.L.C. does not sell or ship replacement parts.
- The M6 x 80 x 100 Long Bolt is compatible with both the BT08-QK Accu-Shot Accuracy International (ASAI) Monopod and BT57-QK Accu-Shot Accuracy International AT Monopod.It is required if additional length of pull spacers are used with Accuracy International buttstocks that our BT08-QK and BT57-QK are being installed on.If you are needing a replacement standard bolt, see our BT0857-B: M6 x 80 x 80 Replacement Bolt
- The M6 x 80 x 80 Replacement Bolt is the same bolt we send standard with both the BT08-QK Accu-Shot Accuracy International (ASAI) Monopod and BT57-QK Accu-Shot Accuracy International AT Monopod.Available as a replacement.If additional length of pull spacers are being used, see our BT0857-LB: M6 x 80 x 100 Long Bolt
- The BT39 AI Monopod Bracket (AIMB) is an adapter required to attach the BT08-QK ASAI monopod (used with the original “legacy” AI style stocksides) to the new Accuracy International “Gen 2” style stocksides. It is machined from 4140 steel with a manganese phosphate finish. Modification to the Buttstock Stocksides (skins) is required to accept the BT39 AIMB.The BT39 AIMB is mounted to the AI frame using your existing BT08 Stock Collar Fastener (this fastener is not included in the BT39, it is included with the BT08) being threaded to the lower AI butt pad bolt. The BT08 is then attached to the BT39 AIMB by means of the supplied 5/16-24 socket head cap screw.Weight: 5.4 ounces
- BT78: SIG SAUER® CROSS™ Buttstock Rail Kit is a 2.05" 1913 Picatinny Rail that installs directly onto the folding buttstock of the SIG SAUER® CROSS™ rifle to allow for mounting our Accu-Shot Precision Rail Monopods (BT12-QK, BT13-QK and BT31-QK).Installation requires two factory 10-24 threaded holes spaced approximately 1.57" apart as found on our sample SIG SAUER® CROSS™. No modification is required. Comes with two 10-24 x 3/4" flat socket cap screws as seen. Use of a thread locker upon installation is suggested.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.Weight: 0.56 ouncesLength: 2.05"
- Since B&T Industries introduced the Atlas Bipod in 2006, the shooting community found a usefulness in its patented, novel features. We began receiving requests for a "bigger," "heavier," "stouter" bipod with the same features. The BT35-LW17 5-H Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-5-H Lever. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Available in black only.NSN 1005-01-708-8193
- Height Range: 5 - 10.2" (6.9” at 90°)
- Pan: 30 degrees
- Cant: 30 degrees
- Pan and Cant can be locked out at top dead center
- Pan and Cant Tension Wheel has Detent adjustability and Cam-Lock
- Position Button 0.5" diameter
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Weight: 27.52 ounces approx.
- Footprint: 14.5–19.5"
- Since B&T Industries introduced the Atlas Bipod in 2006, the shooting community found a usefulness in its patented, novel features. We began receiving requests for a "bigger," "heavier," "stouter" bipod with the same features.The BT35-NC 5-H Atlas Bipod "No Clamp" has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires the 5-H-ADM Lever or will mount directly to our BT19 AI Spigot. *See below for other mount compatibility specifications.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Includes two 10-32 x 3/8" flathead socket screws. Available in black only.
- Height Range: 4.8 - 10" (6.6” at 90°)
- Pan: 30 degrees
- Cant: 30 degrees
- Pan and Cant can be locked out at top dead center
- Pan and Cant Tension Wheel has Detent adjustability and Cam-Lock
- Position Button 0.5" diameter
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Weight: 25.74 ounces approx.
- Footprint: 14.5–19.5"
- The BT72-LW17 Super CAL (Cant And Loc) Atlas Bipod does not PAN. This model mounts directly to any 1913 style Picatinny rail via the included ADM-170-S Lever. Includes patented 45° leg positions, non-rotating legs, optional quick change feet and “Hold What You Move Technology®.”Adjustable, preloaded Cant with additional tension lever using original KMW “Pod-Loc®.” Read how to adjust the Pod-Loc® lever below.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and has heat treated stainless steel components. Available in black only.
- Height Range: 5.8 - 11" (7.7” at 90°)
- Preloaded Cant: 63 degrees
- Position Button: 0.5" diameter
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Weight: 23.1 ounces
- Footprint: 14.75-19.37"
- The BT72-NC Super CAL (Cant And Loc) Atlas Bipod does not PAN. This "No Clamp" model has a two hole pattern of 1.100” with 10/32 threaded holes. It requires any 17S size ”Lever Mount” such as the ADM-170-S, ARMS 17S, LT271 or most ARCA dovetail mount with the same hole pattern. *See below for mount compatibility specifications.The BT72-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.Adjustable, preloaded Cant with additional tension lever using original KMW “Pod-Loc®.” Read how to adjust the Pod-Loc® lever below.Includes patented 45° leg positions, non-rotating legs, optional quick change feet and “Hold What You Move Technology®.” It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and has heat treated stainless steel components. Includes two 10-32 x 3/8" flathead socket screws. Available in black only.
- Height Range: 5.6 - 10.8" (7.4” at 90°)
- Preloaded Cant: 63 degrees
- Position Button: 0.5" diameter
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Weight: 21.2 ounces
- Footprint: 14.75-19.37"
- The BT72 Super CAL (Cant And Loc) Atlas Bipod does not PAN. This model mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly. Includes patented 45° leg positions, non-rotating legs, optional quick change feet and “Hold What You Move Technology®.”Adjustable, preloaded Cant with additional tension lever using original KMW “Pod-Loc®.” Read how to adjust the Pod-Loc® lever below.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and has heat treated stainless steel components. Available in black only.
- Height Range: 5.6 - 10.8" (7.5” at 90°)
- Preloaded Cant: 45 degrees
- Position Button: 0.5" diameter
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Weight: 21.54 ounces
- Footprint: 14.75-19.37"
- The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature.The BT69-LW17 mounts directly to any 1913 style Picatinny rail via the included ADM-170-S Lever.Adjustable, preloaded Cant with additional tension lever using original KMW “Pod-Loc®.” Read how to adjust the Pod-Loc® lever below.It is comprised of 6061-T6 aluminum, except the inner legs which are made from 7075-T6 aluminum, Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only.
- Height Range: 6.3 - 12.5” (8.3” at 90°)
- Preloaded Cant: 63 degrees
- Position Button 0.5" diameter
- 5 leg positions: 0, 45, 90, 135 & 180°
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 16.3 ounces
- Footprint: 9.25-16.5”
- The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature.The BT69-NC Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount such as the ADM-170-S, ARMS 17S, LT271 or most ARCA dovetail mounts with the same hole pattern. *See below for mount compatibility specifications.The BT69-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.Adjustable, preloaded Cant with additional tension lever using original KMW “Pod-Loc®.” Read how to adjust the Pod-Loc® lever below.It is comprised of 6061-T6 aluminum, except the inner legs which are made from 7075-T6 aluminum, Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Includes two 10-32 x 3/8" flathead socket screws. Available in black only.
- Height Range: 6 - 12.3” (8.1” at 90°)
- Preloaded Cant: 63 degrees
- Position Button 0.5" diameter
- 5 leg positions: 0, 45, 90, 135 & 180°
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 14.4 ounces
- Footprint: 9.25-16.5”
- The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature.The BT69 mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly.Adjustable, preloaded Cant with additional tension lever using original KMW “Pod-Loc®.” Read how to adjust the Pod-Loc® lever below.It is comprised of 6061-T6 aluminum, except the inner legs which are made from 7075-T6 aluminum, Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only.
- Height Range: 6.1 - 12.3” (8.2” at 90°)
- Preloaded Cant: 63 degrees
- Position Button 0.5" diameter
- 5 leg positions: 0, 45, 90, 135 & 180°
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 14.5 ounces
- Footprint: 9.25-16.5”
- The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature.The BT65-LW17 mounts directly to any 1913 style Picatinny rail via the included ADM-170-S Lever.Adjustable, preloaded Cant with additional tension lever using original KMW “Pod-Loc®.” Read how to adjust the Pod-Loc® lever below.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only.NSN 1005-01-703-0644
- Height Range: 5.1 - 9.4" (6.6” at 90°)
- Preloaded Cant: 63 degrees
- Position Button 0.5" diameter
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 14.6 ounces
- Footprint: 9–12.5"
- The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount" such as the ADM-170-S, ARMS 17S, LT271 or most ARCA dovetail mount with the same hole pattern. *See below for mount compatibility specifications.The BT65-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.Adjustable, preloaded Cant with additional tension lever using original KMW “Pod-Loc®.” Read how to adjust the Pod-Loc® lever below.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Includes two 10-32 x 3/8" flathead socket screws. Available in black only.
- Height Range: 4.8 - 9.2" (6.4” at 90°)
- Preloaded Cant: 63 degrees
- Position Button 0.5" diameter
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 12.7 ounces
- Footprint: 9–12.5"
- The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature.The BT65 mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly.Adjustable, preloaded Cant with additional tension lever using original KMW “Pod-Loc®.” Read how to adjust the Pod-Loc® lever below.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only. NSN 1005-01-715-0851
- Height Range: 4.9 - 9.2" (6.4” at 90°)
- Preloaded Cant: 63 degrees
- Position Button 0.5" diameter
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 12.9 ounces
- Footprint: 9–12.5"
- We'll not only support your shooting, we'll support your beverage as well!The B&T coasters are 4" in diameter are made from two layers of poplin material with third layer of a plastic backing material. So while these look like patches and were made by a patch company, the three layers of materials is the stuff coasters are made of!Pack of four (4)
- The B&T Gray Logo Patches are 2.25” in diameter and made of PVC or Polyvinyl chloride with a velcro backing. PVC is a type of plastic that has similar feel to rubber and is valued for its durability. They are waterproof able to withstand any temperature will never fade, fray, crack or peel. This patch is dark gray with a medium gray circle and light gray text.Quantity per order is 1.
- The B&T Color Logo Patches are 2.25” in diameter and made of PVC or Polyvinyl chloride with a velcro backing. PVC is a type of plastic that has similar feel to rubber and is valued for its durability. They are waterproof able to withstand any temperature and will never fade, fray, crack or peel. This patch is black with a red circle and white text.Quantity per order is 1.
- The BT29 Sako TRG Rail Kit comes complete and ready to install onto your TRG stock. The kit allows for the installation of the BT12-QK Accu-Shot Precision Rail Monopod (BT12-QK is shown but not included). It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only. Weight: 1.15 ouncesInstallation of the BT29 REQUIRES the temporary removal of the butt pad assembly and drilling of a second hole. Although, this can be accomplished with common hand tools, B&T Industries L.L.C. strongly recommends a competent Gunsmith install the BT29 Sako TRG Rail Kit.
- The BT57-QK Accu-Shot Accuracy International AT (ASAIAT) Monopod is designed specifically to fit the Accuracy International Accuracy Tactical Rifle (AT) and Accuracy Tactical Accuracy International Chassis Systems (ATAICS). Also Known as the Gen. 2 stocks.It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Includes one M6 x 80 x 80 bolt. Available in black only.
- Elevation Range: 3.00 - 4.15”
- Folded Length: 4.10" approximate
- Weight: 8.5 ounces
- The BT52 ACS/STR Picatinny Rail Adaptor for the popular Magpul ACS and STR style stocks provides the means to attach an Accu-Shot Precision Rail Monopod (BT12-QK, BT13-QK and BT31-QK) to your Magpul ACS and STR Stock. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized and steel. The two piece adaptor replaces the polymer insert found on these stocks and is held in place with the supplied fasteners. Other than removing the buttpad and sliding the insert out, no modification is required. A 1/8 hex wrench is required but NOT included. Available in black only.Weight: 1.0 ounce
- The BT51 ACE bracket was designed for the popular A.C.E. Skeleton Stock and provides the means to attach an Accu-Shot Precision Rail Monopod (BT12-QK, BT13-QK and BT31-QK) to your A.C.E. Skeleton Stock. It is machined from 6061-T6 aluminum Mil-Spec Type III hard anodized. Besides the Picatinny rail for the PRM, the BT51 has two flush cups for attaching slings. The two piece bracket is clamped to the angular tube and is held in place with the four supplied SHCS fasteners. No modification is required. A 5/32 hex wrench is required but NOT included. Available in black only.Weight: 2.9 ounces
- The BT47-LW17 PSR (Precision Sniper Rifle) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever.It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Available in black only.The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR).
- Height Range: 6.4 - 12.8" (8.5” at 90°)
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- Position Button 0.5" diameter
- Fore and Aft pivot limiting Bosses
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 15.13 ounces approx.
- Footprint: 10-14.5"
- The BT47-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount such as the ADM-170-S, ARMS 17S, LT271 or any ARCA dovetail mount with the same hole pattern. *See below for mount compatibility specifications.The BT47-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Includes two 10-32 x 3/8" flathead socket screws. Available in black only.The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR).
- Height Range: 6.2 - 12.5" (8.3” at 90°)
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- Position Button 0.5" diameter
- Fore and Aft pivot limiting Bosses
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 12.86 ounces approx.
- Footprint: 10-14.5"
- The BT46-LW17 PSR (Precision Sniper Rifle) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever.It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Available in black only.Selected for the SOCOM PSR (Precision Sniper Rifle) Weapons System. NSN 1005-01-663-0038
- Height Range: 5.2 - 9.6" (6.8” at 90°)
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- Position Button 0.5" diameter
- Fore and Aft pivot limiting Bosses
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 13.61 ounces approx.
- Footprint: 8–11"
- The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount such as the ADM-170-S, ARMS 17S, LT271 or any ARCA dovetail mount with the same hole pattern. *See below for mount compatibility specifications.The BT46-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Includes two 10-32 x 3/8" flathead socket screws. Available in black only.The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR).
- Height Range: 5 - 9.4" (6.5” at 90°)
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- Position Button 0.5" diameter
- Fore and Aft pivot limiting Bosses
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 11.42 ounces approx.
- Footprint: 8–11"
- The BT08-QK ASAI Monopod is designed specifically to fit the Accuracy International AE, AW and AICS systems for the original “Legacy” AI style stock sides that have a thumb hole in the buttstock hook. It folds out of the way when not in use.The Knob is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. The Base is 4140 Steel treated with Manganese Phosphate. Includes one M6 x 80 x 80 bolt. Available in black only.
- Elevation Range: 3.60 – 4.55”
- Folded Length: 4.10"
- Weight: 10 ounces
- Customers with the Accuracy International “Gen 2” style stock sides (without the hole on buttstock hook), please see our BT57-QK.
- Customers that already have the BT08 and wish to mate it to the newer Accuracy International “Gen 2” style stocksides, please see our BT39.
- The BT31-QK is our extended height Precision Rail Monopod (PRM) with QK03 Quick Knob. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
- Elevation Range: 5.65 – 6.60"
- Folded Length: 5.80" approximate
- Weight: 9.0 ounces
- The BT75 Atlas 5-H & Super CAL Raider Cleat Feet are turned from 416 Stainless Steel bar stock in one piece for strength and durability. They will fit 5-H and Super CAL model Atlas Bipods. Easily installed with the press of a stainless steel plunger.The Cleat portion is approximately 1.225” long with the largest outer diameter of approximately 1.443”. Sold as a pair. Available in raw stainless steel only.NSN 1005-01-708-8219Total Weight of Pair: 4.76 ouncesProduct will work on 5-H and Super CAL models only.
- The BT66 Atlas 5-H and Super CAL BAS Ski Feet were developed from listening to customer feedback. Starting with 3.5" 6061-T6 bar stock, these monsters are made to slide in both the 90 and 45 degree leg positions. They are easily installed with the press of a stainless steel plunger to the 5-H and Super CAL models of Atlas Bipod. Sold as a pair.Weight: 6.16 ouncesProduct will work on 5-H and Super CAL models only.
- The BT56 LD-L 1/4-20 Lever Adapter is a Picatinny Rail mounting solution to interface between a Tripod or similar supporting device (shooting/walking/camera stick type monopod) with a standard ¼-20 threaded stud and a firearm with Picatinny Rail.Once the BT56 LD-L is installed on your supporting device using the ¼-20 threaded hole, your Picatinny Rail equipped Rifle, Pistol or Shotgun can be quickly mounted and held to your supporting device.This is a great option for getting added support for hunting and tactical situations where a bipod is not practical. The BT56 LD-L will hold your supporting device to the firearm for transitioning or relocation of firearm.It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. No hardware included. Available in black only.To order the without the installed ADM-170-S, view the BT56 LD 1/4-20 AdapterWeight: 2.7 ounces
- The BT56 LD 1/4-20 Adapter is a mounting solution to interface between a Tripod or similar supporting device (shooting/walking/camera stick type monopod) with a standard ¼-20 threaded stud and a firearm.Once the BT56 is installed on your supporting device using the ¼-20 threaded hole found on the BT56, the other side will accept ant 17S size Picatinny lever or ARCA mount with the matching two hole pattern of 1.100” and 10/32 threaded holes. After completed with a mount or your choice, your Picatinny or ARCA rail equipped Rifle, Pistol or Shotgun can be quickly mounted and held to your supporting device.This is a great option for getting added support for hunting and tactical situations where a bipod is not practical. The BT56 LD will hold your supporting device to the firearm for transitioning or relocation of firearm.It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. No hardware included. Available in black only.The Picatinny Rail lever mount is NOT included. However, the BT56 LD and ADM-170-S can be ordered together as our BT56 LD-L. Other compatible options we currently offer are Area 419's ARCALOCK Clamp and Arisaka's Picatinny Rail Slider.Weight: 0.8 ounces
- The BT26 CAR Adaptor installed on your CAR collapsible stock allows any of our Precision Rail Monopod style monopods to be installed. This is a great option for shooters that want the LOP adjustments available with a collapsible stocks, but want the stability provided by the Accu-Shot. The BT26 replaces the factory loop on the stock while providing the means to re-attach the fixed sling loop with the loop on the left, right or bottom angled forward or backward. It is made of 1018 Cold Rolled Steel and treated with magnesium phosphate. Available in black only.Weight: 1.1 ounce
- The BT13-Qk is our mid-height Precision Rail Monopod (PRM) with QK02 Quick Knob. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
- Elevation Range: 4.75 – 5.65”
- Folded Length: 4.80" approximate
- Weight: 8.3 ounces
