- The US10 ELC (Extremely Large Cards) - These oversized U.S. Sniper Calling Cards were created through our sponsorship of ELR (Extreme Long Range) competitions where the cards are shot beyond 1000 yards.The US10 ELC features our “Ace of Spades” logo printed with black thermography on heavy card stock just like the original US08 cards used for the Accu-Shot One-Shot Challenges™. They are blank on the back and measure 11 x 8.5".Quantity 1 = 10 individual cards for $15.95
- U.S. Snipers Sign reads, “No Trespassing Live Fire Range.” It measures 10 x 14" with two 1/4" holes centered top and bottom and are .063 thick Aluminum with a reflective background.
- These started it all. The U.S. Snipers Calling Cards featuring our “Ace of Spades” logo printed with black thermography on heavy cardstock. Same cards used for the Accu-Shot One-Shot Challenges™. They are blank on the back and measures 2.5 x 3.5".Quantity 1 = 20 individual cards for $5.95
- Appears as the US08: U.S. Snipers Death Calling Card, but are stickers with adhesive on the back.Quantity 15 for $5.00
- U.S. Snipers Poker Playing Cards appear similar to the US08: U.S. Snipers Death Calling Card, but with playing card faces.
- This poster is a battle field photo showing a U.S. Special Forces Sniper in a hide in An Najaf. He was using a 55 gallon drum and a piece of wood for a table, the light coming through the spider hole is the only illumination in this dark and dangerous setting, fitting for the; "Yea, though I walk through the valley of the shadow of death" 23 Psalms. Printed on 100# cover stock. Measures 16 x 20" and is sized ready to frame in a standard frame.
- Sand Gildan 100% cotton T-shirt with line art on the back of a SF sniper in Fallujah with text, “Converting terrorist one bullet at a time.” Features 3” round US Snipers logo on front left chest. Line art measures about 14” wide and created by a young lady free hand from a photo supplied by a member of the Special Forces.
- Black Gildan 100% cotton T-shirt with U.S. Snipers Spade logo on back measuring about 12” high with a small 3” round U.S. Snipers logo on front left chest. The spade logo was a co-op job. Mike McMillan of CSM Gear suggested using the spade and our artist came up with the lettering and design.
- This image is a print from the actual negative, no different than the one featured in the battle photograph. These are die cut at 1.5" in diameter and come ready to install.
Ships unassembled for coating.
Since B&T Industries introduced the Atlas Bipod in 2006, the shooting community found a usefulness in its patented, novel features. We began receiving requests for a "bigger," "heavier," "stouter" bipod with the same features. The BT35-LW17 5-H Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-5-H Lever. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components.- Height Range: 5.5–10.5"
- Pan: 30 degrees
- Cant: 30 degrees
- Pan and Cant can be locked out at top dead center
- Pan and Cant Tension Wheel has Detent adjustability and Cam-Lock
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Weight: 27.52 ounces approx.
- Footprint: 14.5–19.5"
Ships unassembled for coating.
Since B&T Industries introduced the Atlas Bipod in 2006, the shooting community found a usefulness in its patented, novel features. We began receiving requests for a "bigger," "heavier," "stouter" bipod with the same features. The BT35-NC 5-H Atlas Bipod "No Clamp" has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires the 5-H ADM 4103LA74 Lever or any Arca dovetail mount with knob tensioner and same hole pattern. The BT35-NC will also mount to include our BT19 (AI) and BT21 (TRG) spigots. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components.- Height Range: 5.5–10.5"
- Pan: 30 degrees
- Cant: 30 degrees
- Pan and Cant can be locked out at top dead center
- Pan and Cant Tension Wheel has Detent adjustability and Cam-Lock
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Weight: 25.74 ounces approx.
- Footprint: 14.5–19.5"
Ships unassembled for coating.
The BT72-LW17 Super CAL (Cant And Loc) Atlas Bipod does not PAN. This model mounts directly to any 1913 style Picatinny rail via the included ADM-170-S Lever. Includes patented 45° leg positions, non-rotating legs, optional quick change feet and “Hold What You Move Technology®.”It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and has heat treated stainless steel components. We choose to support a legend in the shooting sports by using the original KMW “Pod-Loc®.” Read how to adjust the Pod-Loc® lever below.- Height Range: 5.875-11.125" (7.66” at 90°)
- Cant: 45 degrees
- Position Button: 0.5" diameter
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Weight: 23.16 ounces
- Footprint: 14.75-19.37"
Ships unassembled for coating.
The BT72-NC Super CAL (Cant And Loc) Atlas Bipod does not PAN. This "No Clamp" model has a two hole pattern of 1.100” with 10/32 threaded holes. It requires any 17S size ”Lever Mount” such as the ADM-170-S, ARMS 17S, LT271 or any ARCA dovetail mount with the same hole pattern. The BT72-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.Includes patented 45° leg positions, non-rotating legs, optional quick change feet and “Hold What You Move Technology®.” It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and has heat treated stainless steel components. We choose to support a legend in the shooting sports by using the original KMW “Pod-Loc®.” Read how to adjust the Pod-Loc® lever below.- Height Range: 5.75-10.87" (7.41” at 90°)
- Cant: 45 degrees
- Position Button: 0.5" diameter
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Weight: 21.3 ounces
- Footprint: 14.75-19.37"
Ships unassembled for coating.
The BT72 Super CAL (Cant And Loc) Atlas Bipod does not PAN. This model mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly. Includes patented 45° leg positions, non-rotating legs, optional quick change feet and “Hold What You Move Technology®.”It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and has heat treated stainless steel components. We choose to support a legend in the shooting sports by using the original KMW “Pod-Loc®.” Read how to adjust the Pod-Loc® lever below.- Height Range: 5.75-10.87" (7.46” at 90°)
- Cant: 45 degrees
- Position Button: 0.5" diameter
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Weight: 21.54 ounces
- Footprint: 14.75-19.37"
Ships unassembled for coating.
The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature.The BT69-LW17 mounts directly to any 1913 style Picatinny rail via the included ADM-170-S Lever. It is comprised of 6061-T6 aluminum, except the inner legs which are made from 7075-T6 aluminum, Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. We chose to support a legend in the shooting sports by using the original KMW “Pod-Loc®.”- Height Range: 6-12.25”
- Cant: 45 degrees
- 5 leg positions: 0, 45, 90, 135 & 180°
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 16.1 ounces
- Footprint: 9.25-16.5”
Ships unassembled for coating.
The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature.The BT69-NC Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any ARCA dovetail mount with the same hole pattern. The BT69-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.It is comprised of 6061-T6 aluminum, except the inner legs which are made from 7075-T6 aluminum, Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. We chose to support a legend in the shooting sports by using the original KMW “Pod-Loc®.”- Height Range: 6-12.25”
- Cant: 45 degrees
- 5 leg positions: 0, 45, 90, 135 & 180°
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 14.2 ounces
- Footprint: 9.25-16.5”
Ships unassembled for coating.
The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature.The BT69 mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly. It is comprised of 6061-T6 aluminum, except the inner legs which are made from 7075-T6 aluminum, Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. We chose to support a legend in the shooting sports by using the original KMW “Pod-Loc®.”- Height Range: 6-12.25”
- Cant: 45 degrees
- 5 leg positions: 0, 45, 90, 135 & 180°
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 14.5 ounces
- Footprint: 9.25-16.5”
Ships unassembled for coating.
The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature.The BT65-LW17 mounts directly to any 1913 style Picatinny rail via the included ADM-170-S Lever. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. We chose to support a legend in the shooting sports by using the original KMW “Pod-Loc®.”- Height Range: 4.75–9.0"
- Cant: 45 degrees
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 14.57 ounces
- Footprint: 9–12.5"
Ships unassembled for coating.
The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size ”Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any Arca dovetail mount with the same hole pattern. The BT65-NC will also mount directly to our BT19 (AI) and BT21 (TRG) spigots. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only. We chose to support a legend in the shooting sports by using the original KMW “Pod-Loc®.”- Height Range: 4.75–9.0"
- Cant: 45 degrees
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 12.65 ounces
- Footprint: 9–12.5"
Ships unassembled for coating.
The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature.The BT65 mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. We chose to support a legend in the shooting sports by using the original KMW “Pod-Loc®.”- Height Range: 4.75–9.0"
- Cant: 45 degrees
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 12.87 ounces
- Footprint: 9–12.5"
Ships unassembled for coating.
The BT57-QK Accu-Shot Accuracy International AT (ASAIAT) Monopod is designed specifically to fit the Accuracy International Accuracy Tactical Rifle (AT) and Accuracy Tactical Accuracy International Chassis Systems (ATAICS). Also Known as the Gen. 2 stocks. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized.- Elevation Range: 3.00 - 4.15”
- Folded Length: 4.10" approximate
- Weight: 8.5 ounces
Ships unassembled for coating.
The BT47-LW17 PSR (Precision Sniper Rifle) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever. It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR).- Height Range: 7–13"
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- Fore and Aft pivot limiting Bosses
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 15.13 ounces approx.
- Footprint: 10-14.5"
Ships unassembled for coating.
The BT47-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any ARCA dovetail mount with the same hole pattern. The BT47-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR).- Height Range: 7–13"
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- Fore and Aft pivot limiting Bosses
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 12.86 ounces approx.
- Footprint: 10-14.5"
Ships unassembled for coating.
The BT46-LW17 PSR (Precision Sniper Rifle) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever. It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. The BT46-LW17 was selected for the SOCOM PSR (Precision Sniper Rifle) Weapons System.- Height Range: 5–9"
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- Fore and Aft pivot limiting Bosses
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 13.61 ounces approx.
- Footprint: 8–11"
