Get FREE SHIPPING on standard, domestic USA orders over $99.00.

  • Apparel & Merch

    Apparel & Merch (14)

  • Accu-Shot Monopods

    Accu-Shot Monopods (18)

  • Atlas Bipods

    Atlas Bipods (37)

  • Accessories

    Accessories (61)

  • U.S. Snipers

    U.S. Snipers (9)

  • BLEMISHED

    BLEMISHED (22)

  • View Cart
    Add to cart / Details

    BT46-LW17 PSR Atlas Bipod: Standard height with ADM-170-S Lever

    $354.95
    The BT46-LW17 PSR (Precision Sniper Rifle) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever.It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Available in black only.Selected for the SOCOM PSR (Precision Sniper Rifle) Weapons System. NSN 1005-01-663-0038
    • Height Range: 5.2 - 9.6" (6.8” at 90°)
    • Preloaded Pan: 30 degrees
    • Preloaded Cant: 30 degrees
    • Position Button 0.5" diameter
    • Fore and Aft pivot limiting Bosses
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Larger, stronger inner legs
    • Weight: 13.61 ounces approx.
    • Footprint: 8–11"
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT17: 4″ 1913 Picatinny Rail

    $34.95
    The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels and sling studs (neither provided).A standard sling stud and sling stud spacer or two button head machine screws can be used as a fastener. NO HARDWARE INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks. Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.Weight: 1.20 ouncesProudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT10-LW17 V8 Atlas Bipod

    $294.95
    The BT10-LW17 V8 Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only.NSN 1005-01-623-6257
    • Height Range: 5.2 - 9.6" (6.8” at 90°)
    • Preloaded Pan: 30 degrees
    • Preloaded Cant: 30 degrees
    • Position Button 0.36" diameter
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Weight: 12.7 ounces approx.
    • Footprint: 8–11"
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT10 V8 Atlas Bipod

    $229.95
    The BT10 V8 Atlas Bipod mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only.Selected for SOCOM MK14 MOD 2. NSN 1005-01-601-0007 (for complete system)
    • Height Range: 4.8 - 9.1" (6.3” at 90°)
    • Preloaded Pan: 30 degrees
    • Preloaded Cant: 30 degrees
    • Position Button 0.36" diameter
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Weight: 11.0 ounces approx.
    • Footprint: 8–11"
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Select options / Details

    BT12-QK: Standard Height Accu-Shot® Precision Rail Monopod

    $99.95 – $109.90
    The BT12-QK is our standard height Precision Rail Monopod (PRM) with QK01 Quick Knob. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only. NSN 1005-01-678-1553
    • Elevation Range: 3.75 – 4.65”
    • Folded Length: 3.85" approximate
    • Weight: 7.4 ounces
    How to determine best size Accu-Shot Precision MonopodProudly designed, engineered, machined and assembled in america
  • View Cart
    Select options / Details

    BT13-QK: Mid-Height Accu-Shot® Precision Rail Monopod

    $104.95 – $114.90
    The BT13-Qk is our mid-height Precision Rail Monopod (PRM) with QK02 Quick Knob. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
    • Elevation Range: 4.75 – 5.65”
    • Folded Length: 4.80" approximate
    • Weight: 8.3 ounces
    How to determine best size Accu-Shot Precision MonopodProudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT15: 3.35″ 1913 Picatinny Rail

    $34.95
    The BT15 - 3.35" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 1.76 – 2.78" and a relieved back to accommodate curved surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels and sling studs (neither provided).A standard sling stud and sling stud spacer can be used as one fastener or two button head machine screws can be used. NO HARDWARE INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks. Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.Weight: 0.92 ouncesProudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT1517: Rail Mounting Fastener Set

    $6.95
    The BT1517 Rail Mounting Fastener Set is used for mounting 1913 rails and consists of two (2) 10-32 T-Nuts and two (2) 10-32 x ¾" Button Head Cap Screws. Sold as a pair.These T-nuts are commonly used by stock builders to accommodate the installation of sling studs and rails. They are typically bedded into the stock from the barrel channel side as illustrated in the third image.Weight: 0.4 ounces Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT65-LW17 Gen. 2 CAL Atlas Bipod

    $329.95
    The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature.The BT65-LW17 mounts directly to any 1913 style Picatinny rail via the included ADM-170-S Lever.Adjustable, preloaded Cant with additional tension lever using original KMW “Pod-Loc®.” Read how to adjust the Pod-Loc® lever below.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only.NSN 1005-01-703-0644
    • Height Range: 5.1 - 9.4" (6.6” at 90°)
    • Preloaded Cant: 63 degrees
    • Position Button 0.5" diameter
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Larger, stronger inner legs
    • Weight: 14.6 ounces
    • Footprint: 9–12.5"
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT46-NC PSR Atlas Bipod: Standard height No Clamp

    $289.95
    The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount such as the ADM-170-S, ARMS 17S, LT271 or any ARCA dovetail mount with the same hole pattern. *See below for mount compatibility specifications.The BT46-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Includes two 10-32 x 3/8" flathead socket screws. Available in black only.The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR). 
    • Height Range: 5 - 9.4" (6.5” at 90°)
    • Preloaded Pan: 30 degrees
    • Preloaded Cant: 30 degrees
    • Position Button 0.5" diameter
    • Fore and Aft pivot limiting Bosses
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Larger, stronger inner legs
    • Weight: 11.42 ounces approx.
    • Footprint: 8–11"
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT47-LW17 PSR Atlas Bipod: Tall with ADM 170-S Lever

    $374.95
    The BT47-LW17 PSR (Precision Sniper Rifle) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever.It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Available in black only.The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR).
    • Height Range: 6.4 - 12.8" (8.5” at 90°)
    • Preloaded Pan: 30 degrees
    • Preloaded Cant: 30 degrees
    • Position Button 0.5" diameter
    • Fore and Aft pivot limiting Bosses
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Larger, stronger inner legs
    • Weight: 15.13 ounces approx.
    • Footprint: 10-14.5"
    Proudly designed, engineered, machined and assembled in america
  • BT70: Atlas M-LOK Adaptor
    View Cart
    Add to cart / Details

    BT70: Atlas M-LOK® Adapter

    $34.95
    The BT70 Atlas M-LOK® Adapter is an interface between all Atlas bipods with the “NC” designator in their names (BT10-NC, BT46-NC, BT47-NC, BT35-NC, BT65-NC, BT69-NC, BT72-NC) and M-LOK style mounting systems. It requires two (2) M-LOK standard sized slots for mounting.Machined from 6061-T6 aluminum and Type III hard coat anodized and comes with two 3/8 fasteners and two M-LOK nuts. Available in black only.
    • Length: 3.15"
    • Width: 1.11"
    • Weight: 1.1 oz
    To install to a CAL or Super CAL Atlas Bipod, see installation instructions here.Proudly designed, engineered, machined and assembled in americaFor an M-LOK to Picatinny rail attachment, check out our BT73: M-LOK® Rail
  • View Cart
    Add to cart / Details

    BT10-NC V8 Atlas Bipod

    $229.95
    The BT10-NC V8 Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount such as the ADM-170-S, ARMS 17S, LT271 or any ARCA dovetail mount with the same hole pattern. *See below for mount compatibility specifications.The BT10-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Includes two 10-32 x 3/8" flathead socket screws. Available in black only.
    • Height Range: 5 - 9.4" (6.5” at 90°)
    • Preloaded Pan: 30 degrees
    • Preloaded Cant: 30 degrees
    • Position Button 0.36" diameter
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Weight: 10.8 ounces approx.
    • Footprint: 8–11"
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT74: Atlas Raider Cleat Feet

    $74.95
    The BT74 Atlas Raider Cleat Feet are turned from 303 Stainless Steel bar stock in one piece for strength and durability. They will fit V8, PSR and CAL series of Atlas Bipods. They will also fit bipods/adapters that use Atlas feet. Easily installed with the press of a stainless steel plunger.The Cleat portion is approximately 1.000” long with the largest outer diameter of approximately 1.155”. Sold as a pair. Available in raw stainless steel only.NSN 1005-01-700-6502Total Weight of Pair: 2.6 ouncesProduct will work on V8, PSR and CAL models only.Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT65-NC Gen. 2 CAL Atlas Bipod

    $264.95
    The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount" such as the ADM-170-S, ARMS 17S, LT271 or most ARCA dovetail mount with the same hole pattern. *See below for mount compatibility specifications.The BT65-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.Adjustable, preloaded Cant with additional tension lever using original KMW “Pod-Loc®.” Read how to adjust the Pod-Loc® lever below.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Includes two 10-32 x 3/8" flathead socket screws. Available in black only.
    • Height Range: 4.8 - 9.2" (6.4” at 90°)
    • Preloaded Cant: 63 degrees
    • Position Button 0.5" diameter
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Larger, stronger inner legs
    • Weight: 12.7 ounces
    • Footprint: 9–12.5"
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT81: Lil’ Brandi

    $54.95
    The BT81 Lil’ Brandi is our long awaited answer to getting a 1913 Picatinny Rail mounted on a traditional rifle stock without taking the rifle apart, drilling holes or damaging the stock. Installation utilizes the existing sling stud and provided cross pin, set screw and hex wrench.It features 3 usable slots for attaching any rail mounted Atlas Bipod and a sling attachment to utilize a sling if desired. The angular wings with rubber pads contact the stock. Machined to Picatinny rail standards from 7075-T6 aluminum with Mil-Spec Type III Class 2 finish. No disassembly required. Patent Pending.Not intended for use with flat stocks (reference fourth and fifth image). If the stock has two sling studs, we strongly recommend using our BT15 or BT17
    • Dimensions: 1.95 x 1.5 x 0.663 in
    • Weight: 0.89 ounces
  • View Cart
    Add to cart / Details

    BT34: 2.05″ 1913 Picatinny Rail

    $29.95
    The BT34 - 2.05" 1913 Picatinny Rail has a center to center spacing of 1.6". Two machine screws can be used not included, see BT1517) to attach this rail to the forearm of standard rifle stocks. It can also be attached to a horizontal surface on the Butt section to attach our Precision Rail Monopods.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. NO HARDWARE INCLUDED. Available in black only.Weight: 0.4 ouncesProudly designed, engineered, machined and assembled in america
  • BT32: Atlas Rubber Feet
    View Cart
    Add to cart / Details

    BT32: Atlas Standard Rubber Feet

    $24.95
    The BT32 Atlas Standard Rubber Feet are standard equipment on all V8, PSR or CAL series Atlas Bipods. They will also fit bipods/adapters that use Atlas feet. Easily installed with the press of a stainless steel plunger. Sold as a pair. Available in black only.Weight: 1.0 ounceProudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    Area 419 ARCALOCK Clamp

    $85.00
    "Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction.  If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure. Introducing the ARCALOCK Dovetail Rail System." - Area 419The ARCALOCK Clamp works on all standard ARCA/1.5" dovetail rails. It will bolt directly to any "NC" (No Clamp) style of Atlas Bipods (except the 5-H which requires Extension Spigot for compatibility). Compatible Atlas Bipod models listed below.It will also bolt directly to our BT20-B Bottom Picatinny Rail and BT56LD 1/4-20 Lever Adapter.The ARCALOCK Clamp features a proprietary two-stage screw design. Both the Clamp and Knob are machined from 6061-T6 Aluminum with Type III Hardcoat black anodized Clamp and Knob. The screw is turned from 303 stainless steel.This clamp is manufactured by Area 419 NOT by B&T Industries L.L.C. All warranty issues are to be processed through Area 419. NO HARDWARE INCLUDED.
    • Weight: 2.5 oz
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT65 Gen. 2 CAL Atlas Bipod

    $264.95
    The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature.The BT65 mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly.Adjustable, preloaded Cant with additional tension lever using original KMW “Pod-Loc®.” Read how to adjust the Pod-Loc® lever below.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only. NSN 1005-01-715-0851
    • Height Range: 4.9 - 9.2" (6.4” at 90°)
    • Preloaded Cant: 63 degrees
    • Position Button 0.5" diameter
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Larger, stronger inner legs
    • Weight: 12.9 ounces
    • Footprint: 9–12.5"
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT28: AFAR Rail Kit

    $39.95
    The BT28 AFAR Rail Kit will mount into accessory rails and provide a low profile 1913 Picitinny rail for attaching the Atlas Bipods or other accessories. This is a great option for shooters that have accessory rails and want to use their rail mounted Atlas on several rifles.The uniquely designed rectangle nuts (BT28-N) fit both Freeland and Anschutz style rails by rotating them 90°.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish with 4041 Alloy Steel fasteners. Includes two rectangle nuts, two (2) 10-32 x 3/8" flat head socket cap screws and two (2) 10-32 x 1/2" flat head socket cap screws. Available in black only.
    • Length: 2.05"
    • Weight: 0.89 ounces
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT22: Atlas Leg Extensions

    $59.95
    The BT22 Atlas Leg Extensions are easily installed to any V8, PSR or CAL series Atlas Bipod with the press of a stainless steel plunger. They provide an additional 3 inches of elevation and accept any of our optional V8, PSR or CAL feet. They will also fit bipods/adapters that use Atlas feet. Sold as a pair. Available in black only. NSN 1005-01-641-0369Total Weight of Pair: 1.8 ounces 

    Product will work on V8, PSR and CAL models only.

    Proudly designed, engineered, machined and assembled in america

  • BT73: M-LOK® Rail
    View Cart
    Add to cart / Details

    BT73: M-LOK® Rail

    $34.95
    The BT73 M-LOK® Rail is designed for use with all M-LOK compatible hand guards, forends and buttstocks. It has 3 usable slots for attaching any of our 1913 Picatinny rail mounted Atlas Bipods, Accu-Shot Monopods or Folding Foregrip. It requires standard M-LOK sized slots for mounting.Machined from 6061-T6 aluminum and Type III hard coat anodized. It comes with two 10-24 x 3/8 fasteners and two M-LOK nuts. Available in black only.
    • Length: 1.575"
    • Width: 0.835"
    • Weight: 0.59 oz
    Proudly designed, engineered, machined and assembled in americaFor a direct M-LOK to "NC" (No Clamp) Atlas Bipod interface, check out our BT70: Atlas M-LOK® Adapter
  • ADM-170-S Stock IMG
    View Cart
    Add to cart / Details

    ADM-170-S: Atlas Accessory

    $93.60
    The ADM-170-S base is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems. It has two hole pattern of 1.100”.This lever is manufactured by American Defense MFG, LLC NOT by B&T Industries, LLC and is used on our V8, PSR, CAL and Super CAL models of Atlas Bipods. All warranty issues are to be processed through American Defense MFG, LLCWeight: 1.905 ouncesProudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT28-N: AFAR Rail Nuts

    $12.95
    The BT28-N AFAR Rail Nuts are the same nuts used with the BT28 AFAR Rail Kit. They are 4041 Alloy Steel fasteners. The uniquely designed rectangle nuts fit both Freeland and Anschutz style rails by rotating them 90°. Sold as a pair.Weight: 0.22 ouncesProudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT80: M-LOK® Flush Cup Rail

    $44.95
    The BT80 M-LOK® Flush Cup Rail is designed for use with all M-LOK® compatible hand guards, forends and buttstocks. It has 5 usable slots and a flush cup allowing the use of Flush Cup sling swivels and sling studs (neither provided). The BT80 can be used to attach any of our 1913 Picatinny rail mounted Atlas Bipods, Accu-Shot Monopods or Folding Foregrip. It requires standard M-LOK® sized slots for mounting.Machined from 6061-T6 aluminum and Type III hard coat anodized. It comes with two 10-24 x 3/8 fasteners and two M-LOK® nuts. Available in black only.
    • Length: 2.875"
    • Center-to-center: 1.575"
    • Width: 0.835"
    • Weight: 1.038 oz
  • View Cart
    Select options / Details

    BT01-QK: Standard Height Sling Stud Mount Accu-Shot® Precision Monopod

    $79.95 – $89.90
    The BT01-QK is our standard height Sling Stud Mount Accu-Shot Monopod. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Includes one 3/32” Allen wrench to aid in proper installation. Available in black only.
    • Elevation Range: 3.50 – 4.65"
    • Folded Length: 3.65" approximate
    • Weight: 6.5 ounces
    NOTICE: PART BT03 REQUIRED FOR USE WITH M1A/AR FAMILY OF RIFLESHow to determine best size Accu-Shot Precision MonopodUSA-Flag_Proudly-In-America.png
  • View Cart
    Add to cart / Details

    BT20-B: Atlas Accuracy International Spigot Bottom Rail

    $29.95
    The BT20-B Atlas Accuracy International Spigot Bottom Rail is the same rail found in the BT20, but consists of the bottom 1913 rail ONLY. It attaches to the bottom of the BT19 AAIS via blind threaded 10/32 holes and has a two hole pattern of 1.100" (see third image).To utilize the quick detach lever on our “LW17” style of Atlas Bipods OR the 2-screw mount style of Atlas Bipods, it is compatible with the following:• Any ARCA clamp with a matching hole pattern. We offer Area 419's ARCALOCK Clamp separately OR together as a complete unit: BT20-B/ARCALOCK Clamp (see fourth image)• Any Picatinny clamp with matching hole pattern. We offer American Defense's ADM-170-S separately OR together as a complete unit: BT43 Leveraged Rail (see fifth image)• Arisaka's Picatinny Rail SliderMachined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only. NO HARDWARE INCLUDED. 10-32 x 3/8" Flathead Socket Screws available separately.
    • Length: 1.60"
    • Weight: 0.57 ounces
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT35-LW17 5-H Atlas Bipod

    $504.95
    Since B&T Industries introduced the Atlas Bipod in 2006, the shooting community found a usefulness in its patented, novel features. We began receiving requests for a "bigger," "heavier," "stouter" bipod with the same features. The BT35-LW17 5-H Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-5-H Lever. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Available in black only.NSN 1005-01-708-8193
    • Height Range: 5 - 10.2" (6.9” at 90°)
    • Pan: 30 degrees
    • Cant: 30 degrees
    • Pan and Cant can be locked out at top dead center
    • Pan and Cant Tension Wheel has Detent adjustability and Cam-Lock
    • Position Button 0.5" diameter
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Weight: 27.52 ounces approx.
    • Footprint: 14.5–19.5"
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    RRS SOAR BTC-Pro Bipod Clamp

    $85.00
    "Experience the blend of reliability and lightness with the BTC-Pro clamp. This screw knob clamp offers precise control, ensuring secure attachment of your equipment while shedding unnecessary weight. For photographers and outdoor enthusiasts seeking the optimal balance between strength and portability, the BTC-Pro is your ultimate companion. No compromise on durability, no added burden - that's the BTC-Pro promise." - Really Right Stuff SOAR DivisionThe BTC-Pro Bipod Clamp's Dual Combination Jaw allows for the attachment to either a Picatinny Rail or RRS 1.5" Dovetail Standard. It will bolt directly to any “NC” (No Clamp) style of Atlas Bipods (except the 5-H which requires Extension Spigot for compatibility) using provided hardware. Compatible Atlas Bipod models listed below.It will also bolt directly to our BT56LD 1/4-20 Lever Adapter.The BTC-Pro Bipod Clamp is CNC machined from 6061-T651 aluminum. Includes two (2) 10-32 x 3/8 flat-head screws and (1) 1/8" hex-key. Made in the USA.This clamp is manufactured by Really Right Stuff, SOAR Division NOT by B&T Industries, LLC. All warranty issues are to be processed through Really Right Stuff.
  • BT23: Atlas Ski Feet
    View Cart
    Add to cart / Details

    BT23: Atlas Ski Feet

    $59.95
    The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL series Atlas Bipod with the press of a stainless steel plunger. They will lay flat in the 90 degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod. They will also fit bipods/adapters that use Atlas feet. Sold as a pair. Available in black only. NSN 1005-01-640-8881Total Weight of Pair: 1.5 ounces

    Product will work on V8, PSR and CAL models only.

    Proudly designed, engineered, machined and assembled in america

  • View Cart
    Select options / Details

    BT04-QK: Standard Height Sling Stud Mount Accu-Shot® Precision Monopod

    $94.95 – $104.90
    The BT04-QK is our standard height Sling Stud Mount. Additional Thumbnut installed to LOCK the unit into a fixed elevation. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Includes one 3/32” Allen wrench to aid in proper installation. Available in black only.
    • Elevation Range: 3.75 – 4.85”
    • Folded Length: 3.95"
    • Weight: 7.3 ounces
    NOTICE: PART BT03 REQUIRED FOR USE WITH M1A/AR FAMILY OF RIFLESHow to determine best size Accu-Shot Precision MonopodProudly designed, engineered, machined and assembled in america
  • 10-32 x 3/8" Flathead Socket Screws
    View Cart
    Add to cart / Details

    10-32 x 3/8″ Flat Socket Screw

    $1.75
    Sold as a single 10-32 x 3/8" Flathead Socket Screw.These are the same screws that come installed on all "NC" (No Clamp) models of Atlas Bipods.
  • View Cart
    Add to cart / Details

    BT72-LW17 Super CAL Atlas Bipod

    $439.95
    The BT72-LW17 Super CAL (Cant And Loc) Atlas Bipod does not PAN. This model mounts directly to any 1913 style Picatinny rail via the included ADM-170-S Lever. Includes patented 45° leg positions, non-rotating legs, optional quick change feet and “Hold What You Move Technology®.”Adjustable, preloaded Cant with additional tension lever using original KMW “Pod-Loc®.” Read how to adjust the Pod-Loc® lever below.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and has heat treated stainless steel components. Available in black only.
    • Height Range: 5.8 - 11" (7.7” at 90°) 
    • Preloaded Cant: 63 degrees
    • Position Button: 0.5" diameter
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Weight: 23.1 ounces
    • Footprint: 14.75-19.37"
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT69-LW17 Gen. 2 CAL Atlas Bipod: Tall with ADM-170-S Lever

    $354.95
    The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature.The BT69-LW17 mounts directly to any 1913 style Picatinny rail via the included ADM-170-S Lever.Adjustable, preloaded Cant with additional tension lever using original KMW “Pod-Loc®.” Read how to adjust the Pod-Loc® lever below.It is comprised of 6061-T6 aluminum, except the inner legs which are made from 7075-T6 aluminum, Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only.
    • Height Range: 6.3 - 12.5” (8.3” at 90°)
    • Preloaded Cant: 63 degrees
    • Position Button 0.5" diameter
    • 5 leg positions: 0, 45, 90, 135 & 180°
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Larger, stronger inner legs
    • Weight: 16.3 ounces
    • Footprint: 9.25-16.5”
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT49: 2.05″ 1913 Adjustable Picatinny Rail

    $29.95
    The BT49 - 2.05" 1913 Adjustable Picatinny Rail has a center-to-center spacing of 1.2 - 1.6". Two machine screws can be used (not included, see BT1517) to attach this rail to the forearm of standard rifle stocks. Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish.The BT49 can also be attached to a horizontal surface on the Butt section to attach our Precision Rail Monopods. NO HARDWARE INCLUDED. Available in black only.
    • Length: 2.05"
    • Weight: 0.4 ounces
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT20-B/ARCALOCK Clamp

    $119.95
    The BT20-B/ARCALOCK Clamp is our BT20-B Picatinny Rail installed onto Area 419's ARCALOCK Clamp. It will accept any rail mounted bipod.The BT20-B Rail is machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.The ARCALOCK Clamp features a proprietary two-stage screw design. Both the Clamp and Knob are machined from 6061-T6 Aluminum with Type III Hardcoat black anodized Clamp and Knob. The screw is turned from 303 stainless steel.The clamp is manufactured by Area 419 NOT by B&T Industries L.L.C. All warranty issues are to be processed through Area 419. It can be used on our Atlas V8, PSR, CAL and Super CAL models.
    • Weight: 3.2 ounces
    • Length: 1.6"
  • View Cart
    Select options / Details

    BT31-QK: Extended Height Accu-Shot® Precision Rail Monopod

    $109.95 – $119.90
    The BT31-QK is our extended height Precision Rail Monopod (PRM) with QK03 Quick Knob. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
    • Elevation Range: 5.65 – 6.60"
    • Folded Length: 5.80" approximate
    • Weight: 9.0 ounces
    How to determine best size Accu-Shot Precision MonopodProudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT62: Groupy®

    $8.95
    The Groupy measures groups within a 1.5” diameter. Measurements are laser cut into acrylic with a glow-in-the-dark cord attached.Shoot three to five shots. Lay Groupy over shot group. Adjust until one of the circles cross the center of the two outer most holes. Read measurement on that circle to determine group size.
  • View Cart
    Add to cart / Details

    BT47-NC PSR Atlas Bipod: Tall No Clamp

    $309.95
    The BT47-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount such as the ADM-170-S, ARMS 17S, LT271 or any ARCA dovetail mount with the same hole pattern. *See below for mount compatibility specifications.The BT47-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Includes two 10-32 x 3/8" flathead socket screws. Available in black only.The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR).
    • Height Range: 6.2 - 12.5" (8.3” at 90°)
    • Preloaded Pan: 30 degrees
    • Preloaded Cant: 30 degrees
    • Position Button 0.5" diameter
    • Fore and Aft pivot limiting Bosses
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Larger, stronger inner legs
    • Weight: 12.86 ounces approx.
    • Footprint: 10-14.5"
    Proudly designed, engineered, machined and assembled in america
  • BT43: Leveraged Rail IMG1
    View Cart
    Add to cart / Details

    BT43: Leveraged Rail

    $99.95
    The BT43 Leveraged Rail is a BT20-B and an American Defense ADM-170-S lever as a complete assembly. It provides the means to quickly attach/detach any rail attached accessory to include our Atlas Bipods and Precision Rail Monopods. The BT20-B is machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.
    • Length: 1.6"
    • Bottom of rail to bottom of BT20-B rail: 0.58"
    • Weight: 2.5 ounces
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT82: Sticker Support Pack

    $5.95
    Each pack contains six custom designs. Stickers are screen printed UV vinyl and can be used indoors or outdoors.
  • View Cart
    Add to cart / Details

    BT19: Atlas Accuracy International Spigot

    $79.95
    The BT19 Atlas Accuracy International Spigot (AAIS) is designed for use with any NC (No Clamp) style Atlas Bipod that mounts directly to the AAIS which plugs into the Accuracy International AI/AICS stocks utilizing the factory retention/release mechanism.The evolution of long range shooting and shooter's demand drove subtle changes to the BT19. The latest modification stops the 3 to 9 rotation.It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized mated with an alloy steel Spigot that is finished with a Manganese Phosphate. Includes two (2) 10-32 x 1" flat head socket cap screws. Available in black only.Weight: 4.7 ouncesProudly designed, engineered, machined and assembled in america
  • Sale!
    ADM-170-S Stock IMG
    View Cart
    Add to cart / Details

    BLEMISHED ADM-170-S: Atlas Accessory

    $79.56
    The ADM-170-S base is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.This lever is manufactured by American Defense Manufacturing NOT by B&T Industries L.L.C. and is used on our Atlas, PSR and CAL models.Weight: 1.905 ounces
  • BT07: Tac-Cap
    View Cart
    Add to cart / Details

    BT07: Tac-Cap Accessory

    $9.95
    The BT07 Tac-Cap is an optional steel cap that replaces the standard plastic cap found at the bottom of the monopod knob. It can damage soft surfaces and is intended for units that will experience hard surface use.Installation of the BT07 is friction-fit and requires no tools. However, we recommend permanently setting the BT07 and will do so at no additional charge when ordered along with any Accu-Shot Monopod, unless otherwise specified in the "comments" section. Available in black only.Weight: 0.35 ouncesProudly designed, engineered, machined and assembled in america
  • US08 - ASOSC Cards
    View Cart
    Add to cart / Details

    US08: U.S. Snipers Calling Cards

    $5.95
    These started it all. The U.S. Snipers Calling Cards featuring our “Ace of Spades” logo printed with black thermography on heavy cardstock. Same cards used for the Accu-Shot One-Shot Challenges™. They are blank on the back and measures 2.5 x 3.5".Quantity 1 = 20 individual cards for $5.95 Proudly designed, engineered, machined and assembled in america
  • View Cart
    Select options / Details

    BT05-QK: Mid-Height Sling Stud Mount Accu-Shot® Precision Monopod

    $99.95 – $109.90
    The BT05-QK is our mid-height Sling Stud Mount. Additional Thumbnut installed to LOCK the unit into a fixed elevation. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Includes one 3/32” Allen wrench to aid in proper installation.Available in black only.
    • Elevation Range: 4.80 – 5.85"
    • Folded Length: 4.95" approximate
    • Weight: 8.2 ounces
    NOTICE: PART BT03 REQUIRED FOR USE WITH M1A/AR FAMILY OF RIFLESHow to determine best size Accu-Shot Precision MonopodProudly designed, engineered, machined and assembled in america
  • BT66: Atlas 5-H & S-CAL BAS Ski Feet
    View Cart
    Add to cart / Details

    BT66: Atlas 5-H & Super CAL BAS Ski Feet

    $99.95
    The BT66 Atlas 5-H and Super CAL BAS Ski Feet were developed from listening to customer feedback. Starting with 3.5" 6061-T6 bar stock, these monsters are made to slide in both the 90 and 45 degree leg positions. They are easily installed with the press of a stainless steel plunger to the 5-H and Super CAL models of Atlas Bipod. Sold as a pair.Weight: 6.16 ouncesProduct will work on 5-H and Super CAL models only.Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    Gen. 2 BT27: Folding Foregrip

    $104.95
    When a member of a government agency asked us why the BT27 did not offer a 45 degree position, we did not have an answer. Now it does! The newly redesigned BT27 Folding Foregrip offers two opposing flat surfaces to secure light switches with the installed Buna O-Rings. Removing the bottom cap reveals a storage compartment designed to hold a single 123 battery. The unique design protects the battery from being drained by placing the positive side (+) towards the relieved cap. We also trimmed the handle to decrease weight while maintaining battery storage and touch pad retainers. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
    • Deployed Length: 4.073"
    • Folded Length: 4.032"
    • Weight: 5.2 ounces
    Proudly designed, engineered, machined and assembled in america
  • 10-32 x 1.25" Socket Cap Screws
    View Cart
    Add to cart / Details

    10-32 x 1.25″ Socket Cap Screw

    $1.75
    Sold as a single 10-32 x 1.25" Socket Cap Screw.Purchasing a quantity of two (2) 10-32 x 1.25" Socket Cap Screws would be ideal for use with any 2-screw clamp Atlas Bipod mounts (BT10, BT65, BT69, BT72). These are what we have used for contractual fulfillments.Purchasing a quantity of one (1) 10-32 x 1.25" Socket Cap Screw would be ideal for use with any Precision Rail Mount (PRM) Accu-Shot Monopod (BT12, BT13, BT31). 
  • View Cart
    Add to cart / Details

    BT75: Atlas 5-H & Super CAL Raider Cleat Feet

    $94.95
    The BT75 Atlas 5-H & Super CAL Raider Cleat Feet are turned from 416 Stainless Steel bar stock in one piece for strength and durability. They will fit 5-H and Super CAL model Atlas Bipods. Easily installed with the press of a stainless steel plunger.The Cleat portion is approximately 1.225” long with the largest outer diameter of approximately 1.443”. Sold as a pair. Available in raw stainless steel only.NSN 1005-01-708-8219Total Weight of Pair: 4.76 ouncesProduct will work on 5-H and Super CAL models only.Proudly designed, engineered, machined and assembled in america
  • Sale!
    View Cart
    Add to cart / Details

    BLEMISHED BT17: 4″ 1913 Picatinny Rail

    $29.71
    The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces.A standard sling stud and sling stud spacer or two button head machine screws can be used as a fastener. NO HARDWARE INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks. Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.Weight: 1.20 ouncesProudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT21: Atlas TRG Bracket

    $59.95
    The BT21 Atlas TRG Bracket (ATB) is designed for use with the Sako TRG line of rifles that utilize the TRG bipod attachment slot with 0.42" hole spacing. The ATB provides a forward mounting position which is also closer to the bore-line.It is designed for use with either the 2-screw clamp (BT10, BT65, BT69, BT72) or quick detach lever (indicated by "LW17") models of Atlas Bipods, which would mount directly to the Picatinny Rail portion of the ATB.Although the No Clamp (NC) models can be mounted onto the ATB, it requires installation of the bipod during the installations of the ATB prior to reassembly of stock. THIS RESULTS IN A SEMI-PERMANENT, DEDICATION OF THE BIPOD TO THAT PARTICULAR RIFLE.The ATB is constructed from 6061-T6 Aluminum with a Type III hard anodized finish and heat treated alloy steel with a Manganese Phosphate finish. Available in black only. Fasteners included: two (2) M5 - .8 x 10” flat head socket cap screws, two (2) 10-32 x 3/4” flat head socket cap screws and two (2) 10-32 x 5/8” flat head socket cap screws
    • Length: 3.83"
    • Weight: 5.03 ounces
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT72 Super CAL Atlas Bipod

    $374.95
    The BT72 Super CAL (Cant And Loc) Atlas Bipod does not PAN. This model mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly. Includes patented 45° leg positions, non-rotating legs, optional quick change feet and “Hold What You Move Technology®.”Adjustable, preloaded Cant with additional tension lever using original KMW “Pod-Loc®.” Read how to adjust the Pod-Loc® lever below.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and has heat treated stainless steel components. Available in black only.
    • Height Range: 5.6 - 10.8" (7.5” at 90°)
    • Preloaded Cant: 45 degrees
    • Position Button: 0.5" diameter
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Weight: 21.54 ounces
    • Footprint: 14.75-19.37"
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT69-NC Gen. 2 CAL Atlas Bipod: Tall with No Clamp

    $289.95
    The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature.The BT69-NC Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount such as the ADM-170-S, ARMS 17S, LT271 or most ARCA dovetail mounts with the same hole pattern. *See below for mount compatibility specifications.The BT69-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.Adjustable, preloaded Cant with additional tension lever using original KMW “Pod-Loc®.” Read how to adjust the Pod-Loc® lever below.It is comprised of 6061-T6 aluminum, except the inner legs which are made from 7075-T6 aluminum, Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Includes two 10-32 x 3/8" flathead socket screws. Available in black only.
    • Height Range: 6 - 12.3” (8.1” at 90°)
    • Preloaded Cant: 63 degrees
    • Position Button 0.5" diameter
    • 5 leg positions: 0, 45, 90, 135 & 180°
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Larger, stronger inner legs
    • Weight: 14.4 ounces
    • Footprint: 9.25-16.5”
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT30-C: Coyote Brown Atlas Bipod Pouch

    $59.95
    The BT30-C Coyote Brown Atlas Bipod Pouch accommodates all V8, Standard PSR and CAL model Atlas Bipods. They offer a pocket for the Atlas Leg Extensions and another for optional Atlas feet.It does NOT accept the 5-H, Super CAL or Tall PSR/CAL models.Made out of 1000 denier cordura nylon. Also available in Ranger Green and Black.Weight: 7.9 ouncesProudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT35-NC 5-H Atlas Bipod

    $429.95
    Since B&T Industries introduced the Atlas Bipod in 2006, the shooting community found a usefulness in its patented, novel features. We began receiving requests for a "bigger," "heavier," "stouter" bipod with the same features.The BT35-NC 5-H Atlas Bipod "No Clamp" has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires the 5-H-ADM Lever or will mount directly to our BT19 AI Spigot. *See below for other mount compatibility specifications.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Includes two 10-32 x 3/8" flathead socket screws. Available in black only.
    • Height Range: 4.8 - 10" (6.6” at 90°)
    • Pan: 30 degrees
    • Cant: 30 degrees
    • Pan and Cant can be locked out at top dead center
    • Pan and Cant Tension Wheel has Detent adjustability and Cam-Lock
    • Position Button 0.5" diameter
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Weight: 25.74 ounces approx.
    • Footprint: 14.5–19.5"
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    Arisaka Picatinny Rail Slider

    $100.00
    "Make Picatinny Great Again with the Patent Pending Arisaka Rail Slider. It transforms the Picatinny rail on your rifle into a multi-position sliding mount with a push button recoil lug. A unique detented knob is used to set sliding tension, accounts for out-of-spec rails, allows the mount to be removed or installed without having to slide it off the end of the rail, and can be quickly and easily tightened down for maximum precision." - Arisaka, LLCThe Picatinny Rail Slider will bolt directly to any “NC” (No Clamp) style of Atlas Bipods (except the 5-H which requires Extension Spigot for compatibility) using provided hardware. Compatible Atlas Bipod models listed below.It will also bolt directly to our BT20-B Bottom Picatinny Rail and  BT56LD 1/4-20 Lever Adapter.The Rail Slider is CNC machined from stainless steel and MIL-A-8625 Type III hard coat anodized 6061-T651 aluminum. Includes two (2) 10-32 x 5/16" socket cap screws. Requires a 5/32" allen wrench for installation (not included). Recommended torque: 30 inch lbs. Made in the USA.This clamp is manufactured by Arisaka, LLC NOT by B&T Industries, LLC. All warranty issues are to be processed through Arisaka.
    • Weight: 2.2 oz
  • View Cart
    Add to cart / Details

    BT72-NC Super CAL Atlas Bipod

    $374.95
    The BT72-NC Super CAL (Cant And Loc) Atlas Bipod does not PAN. This "No Clamp" model has a two hole pattern of 1.100” with 10/32 threaded holes. It requires any 17S size ”Lever Mount” such as the ADM-170-S, ARMS 17S, LT271 or most ARCA dovetail mount with the same hole pattern. *See below for mount compatibility specifications.The BT72-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.Adjustable, preloaded Cant with additional tension lever using original KMW “Pod-Loc®.” Read how to adjust the Pod-Loc® lever below.Includes patented 45° leg positions, non-rotating legs, optional quick change feet and “Hold What You Move Technology®.” It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and has heat treated stainless steel components. Includes two 10-32 x 3/8" flathead socket screws. Available in black only.
    • Height Range: 5.6 - 10.8" (7.4” at 90°)
    • Preloaded Cant: 63 degrees
    • Position Button: 0.5" diameter
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Weight: 21.2 ounces
    • Footprint: 14.75-19.37"
    Proudly designed, engineered, machined and assembled in america
  • 10-32 x 1.25" Socket Cap Screws
    View Cart
    Add to cart / Details

    10-32 x 1.25″ Clamp Bolt – Flathead Fastener

    $1.75
    Sold as a single 10-32 x 1.25" Clamp Bolt - Flat Head Fastener. The material is 4140 Alloy Steel with a manganese phosphate finish.Purchasing a quantity of two (2) 10-32 x 1.25" Clamp Bolts - Flat Head Fasteners would be ideal for use with any 2-screw clamp Atlas Bipod mounts (BT10, BT65, BT69, BT72).Purchasing a quantity of one (1) 10-32 x 1.25" Clamp Bolt - Flat Head Fastener would be ideal for use with any Precision Rail Mount (PRM) Accu-Shot Monopod (BT12, BT13, BT31).We have also used 10-32 x 1.25" Socket Cap Screws for contractual fulfillments available.
  • View Cart
    Add to cart / Details

    BT59: B&T Color Logo Patch

    $4.95
    The B&T Color Logo Patches are 2.25” in diameter and made of PVC or Polyvinyl chloride with a velcro backing. PVC is a type of plastic that has similar feel to rubber and is valued for its durability. They are waterproof able to withstand any temperature and will never fade, fray, crack or peel. This patch is black with a red circle and white text.Quantity per order is 1.
  • View Cart
    Select options / Details

    BT16: We Support Diplomacy

    $19.95 – $22.95
    The “We Support Diplomacy” shirt features a rifle of our design being supported by our Accu-Shot PRM Monopod and PSR Atlas Bipod with Spiked Cleated Feet. Text reads, "We Support Diplomacy” with “the last 600 yards of” in a smaller font between “Support” and “Diplomacy”.Artwork and text are white printed onto a navy Gildan 100% cotton T-shirt. The front has a “B&T” circle logo on the front chest with “Bitter & Twisted” below.
  • BT46-LW17 PSR Atlas Bipod: Standard height with ADM 170-S Lever
    View Cart
    Add to cart / Details

    U-BT46-LW17 PSR Atlas Bipod: Standard height with Quick Detach Lever – Unassembled

    $394.95

    Ships unassembled for coating.

    The BT46-LW17 PSR (Precision Sniper Rifle) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever. It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. The BT46-LW17 was selected for the SOCOM PSR (Precision Sniper Rifle) Weapons System.
    • Height Range: 5–9"
    • Preloaded Pan: 30 degrees
    • Preloaded Cant: 30 degrees
    • Fore and Aft pivot limiting Bosses
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Larger, stronger inner legs
    • Weight: 13.61 ounces approx.
    • Footprint: 8–11"
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT30-B: Black Atlas Bipod Pouch

    $59.95
    The BT30-B Black Atlas Bipod Pouch accommodates all V8, Standard PSR and CAL model Atlas Bipods. They offer a pocket for the Atlas Leg Extensions and another for optional Atlas feet.It does NOT accept the 5-H, Super CAL or Tall PSR/models.Made out of 1000 denier cordura nylon. Also available in Coyote Brown and Ranger Green. Weight: 7.9 ouncesProudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    Area 419 ARCALOCK Spigot Extension

    $30.00
    The ARCALOCK Spigot Extension was designed for use with Area 419's ARCALOCK Clamp.Some ARMS17-S accessory with matching hole pattern of 1.100” such as American Defense's ADM-170-s, Arisaka's Picatinny Rail Slider or Really Right Stuff's BTC-Pro Bipod Clamp. However due to design, some clamps will NOT fit such as Magpul's QR Rail Grabber (MAG1196) and Really Right Stuff's SC-ARC Bipod Clamp.It is ideal to adapt our BT35-NC 5-H Atlas Bipod to an ARCA clamp for clearance of the cradle and operation of the clamp's knob. It will also extend all "NC" or No Clamp models (view complete list below) of Atlas Bipods out extra 1.25″ for increased stability. To use with your Bipod that already has a clamp, lever or mount installed, simply remove it to attach the spigot.This spigot is manufactured by Area 419 NOT by B&T Industries L.L.C. Includes two 10-32 x 3/8" flathead socket screws and two 10-32 x 5/8" flathead socket screws.
    • Weight: 1.79 oz
    • Dimensions: 3.2 × 1.24 × 0.35 in
     
  • Sale!
    View Cart
    Add to cart / Details

    BLEMISHED BT15: 3.35″ 1913 Picatinny Rail

    $29.71
    The BT15 - 3.35" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 1.76 – 2.78" and a relieved back to accommodate curved surfaces.A standard sling stud and sling stud spacer can be used as one fastener or two button head machine screws can be used. NO HARDWARE INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks. Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.Weight: 0.92 ouncesProudly designed, engineered, machined and assembled in america
  • Sale!
    View Cart
    Add to cart / Details

    BLEMISHED BT10-NC V8 Atlas Bipod*

    $195.46
    The BT10-NC V8 Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any ARCA dovetail mount with the same hole pattern. The BT10-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Includes two 10-32 x 3/8" flathead socket screws. Available in black only.
    • Height Range: 5 - 9.4" (6.5” at 90°)
    • Preloaded Pan: 30 degrees
    • Preloaded Cant: 30 degrees
    • Position Button 0.36" diameter
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Weight: 10.8 ounces approx.
    • Footprint: 8–11"
    *To make your Blemished BT10-NC a BT10-LW17, add an ADM-170-S Lever to your cart. They are not blemished and sold at full retail price. If added to your cart, we will install the lever onto the bipod in your cart unless otherwise specified in the "Comments" section. 
  • View Cart
    Add to cart / Details

    BT56 LD-L: ¼-20 Lever Adapter

    $89.95
    The BT56 LD-L 1/4-20 Lever Adapter is a Picatinny Rail mounting solution to interface between a Tripod or similar supporting device (shooting/walking/camera stick type monopod) with a standard ¼-20 threaded stud and a firearm with Picatinny Rail.Once the BT56 LD-L is installed on your supporting device using the ¼-20 threaded hole, your Picatinny Rail equipped Rifle, Pistol or Shotgun can be quickly mounted and held to your supporting device.This is a great option for getting added support for hunting and tactical situations where a bipod is not practical. The BT56 LD-L will hold your supporting device to the firearm for transitioning or relocation of firearm.It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. No hardware included. Available in black only.To order the without the installed ADM-170-S, view the BT56 LD 1/4-20 AdapterWeight: 2.7 ouncesProudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT30-R: Ranger Green Atlas Bipod Pouch

    $59.95
    The BT30-R Ranger Green Atlas Bipod Pouch accommodates all V8, Standard PSR and CAL model Atlas Bipods. They offer a pocket for the Atlas Leg Extensions and another for optional Atlas feet.It does NOT accept the 5-H, Super CAL or Tall PSR/CAL models.Made out of 1000 denier cordura nylon. Also available in Coyote Brown and Black. Weight: 7.9 ouncesProudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT56 LD: ¼-20 Adapter

    $19.95
    The BT56 LD 1/4-20 Adapter is a mounting solution to interface between a Tripod or similar supporting device (shooting/walking/camera stick type monopod) with a standard ¼-20 threaded stud and a firearm.Once the BT56 is installed on your supporting device using the ¼-20 threaded hole found on the BT56, the other side will accept ant 17S size Picatinny lever or ARCA mount with the matching two hole pattern of 1.100” and 10/32 threaded holes. After completed with a mount or your choice, your Picatinny or ARCA rail equipped Rifle, Pistol or Shotgun can be quickly mounted and held to your supporting device.This is a great option for getting added support for hunting and tactical situations where a bipod is not practical. The BT56 LD will hold your supporting device to the firearm for transitioning or relocation of firearm.It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. No hardware included. Available in black only.The Picatinny Rail lever mount is NOT included. However, the BT56 LD and ADM-170-S can be ordered together as our BT56 LD-L. Other compatible options we currently offer are Area 419's ARCALOCK Clamp and Arisaka's Picatinny Rail Slider.Weight: 0.8 ouncesProudly designed, engineered, machined and assembled in america
  • View Cart
    Select options / Details

    BT6569ML / BT6569ML-NC: Atlas CAL Upgrade Mount

    $34.95
    The BT6569ML and BT6569ML-NC are current production CAL mounts that provide 63 degrees of Cant. Additional Cant is considered an upgrade (see illustrations to determine which mount you have).The additional degrees of Cant was requested by a member of the SOF community and longtime user of B&T products.Variation differences and compatibility detailed in description below.
  • View Cart
    Add to cart / Details

    BT69 Gen. 2 CAL Atlas Bipod: Tall with 2-Screw Clamp

    $289.95
    The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature.The BT69 mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly.Adjustable, preloaded Cant with additional tension lever using original KMW “Pod-Loc®.” Read how to adjust the Pod-Loc® lever below.It is comprised of 6061-T6 aluminum, except the inner legs which are made from 7075-T6 aluminum, Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only. 
    • Height Range: 6.1 - 12.3” (8.2” at 90°)
    • Preloaded Cant: 63 degrees
    • Position Button 0.5" diameter
    • 5 leg positions: 0, 45, 90, 135 & 180°
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Larger, stronger inner legs
    • Weight: 14.5 ounces
    • Footprint: 9.25-16.5”
    Proudly designed, engineered, machined and assembled in america
B&T Industries, LLC

WE ARE SUPPORT

SHOP

RESOURCES

SUPPORT

1 (316) 721 – 3222
Mon-Fri 8:00-4:30 CST
CAGE CODE 3L7F2
identity theft protected Copyright 2004-2021 B&T Industries, L.L.C. | Contact Us | Website Dev. by Insite Motion
Go to Top