- Sold as a single 10-32 x 3/8" Flathead Socket Screw.These are the same screws that come installed on all "NC" (No Clamp) models of Atlas Bipods.
- Sold as a single 10-32 x 1.25" Clamp Bolt - Flat Head Fastener. The material is 4140 Alloy Steel with a manganese phosphate finish.Purchasing a quantity of two (2) 10-32 x 1.25" Clamp Bolts - Flat Head Fasteners would be ideal for use with any 2-screw clamp Atlas Bipod mounts (BT10, BT65, BT69, BT72).Purchasing a quantity of one (1) 10-32 x 1.25" Clamp Bolt - Flat Head Fastener would be ideal for use with any Precision Rail Mount (PRM) Accu-Shot Monopod (BT12, BT13, BT31).We have also used 10-32 x 1.25" Socket Cap Screws for contractual fulfillments available.
- Sold as a single 10-32 x 1.25" Socket Cap Screw.Purchasing a quantity of two (2) 10-32 x 1.25" Socket Cap Screws would be ideal for use with any 2-screw clamp Atlas Bipod mounts (BT10, BT65, BT69, BT72). These are what we have used for contractual fulfillments.Purchasing a quantity of one (1) 10-32 x 1.25" Socket Cap Screw would be ideal for use with any Precision Rail Mount (PRM) Accu-Shot Monopod (BT12, BT13, BT31).
- The B&T Color Logo Patches are 2.25” in diameter and made of PVC or Polyvinyl chloride with a velcro backing. PVC is a type of plastic that has similar feel to rubber and is valued for its durability. They are waterproof able to withstand any temperature and will never fade, fray, crack or peel. This patch is black with a red circle and white text.Quantity per order is 1.
- The B&T Gray Logo Patches are 2.25” in diameter and made of PVC or Polyvinyl chloride with a velcro backing. PVC is a type of plastic that has similar feel to rubber and is valued for its durability. They are waterproof able to withstand any temperature will never fade, fray, crack or peel. This patch is dark gray with a medium gray circle and light gray text.Quantity per order is 1.
- This image is a print from the actual negative, no different than the one featured in the battle photograph. These are die cut at 1.5" in diameter and come ready to install.
- Appears as the US08: U.S. Snipers Death Calling Card, but are stickers with adhesive on the back.Quantity 15 for $5.00
- These started it all. The U.S. Snipers Calling Cards featuring our “Ace of Spades” logo printed with black thermography on heavy cardstock. Same cards used for the Accu-Shot One-Shot Challenges™. They are blank on the back and measures 2.5 x 3.5".Quantity 1 = 20 individual cards for $5.95
- Each pack contains six custom designs. Stickers are screen printed UV vinyl and can be used indoors or outdoors.
- The “Peace Symbol” bumper sticker is a great way to share your thoughts with friends and family! We thank the fine folks at Black Hills Ammo for allowing us to use their idea in our own unique way.Quantity 5Dimensions: 9.25 x 2.625”Made in America.
- The BT14 Magpul PRS Threaded Sling Studs replace one of the four Socket Button Head Cap Screws found on the Magpul Precision Rifle Stock (PRS) with a sling stud. The threaded straps that come standard with the PRS can be reversed giving a total of 8 choices for stud placement. Each BT14 comes with two Sling Studs having 10-24 threads and black polymer spacers.
- Overall Length: 1.625"
- Length of Threaded Portion: 0.625"
- Length of Shaft Overall: 1.25"
- Weight: 0.5 ounces
- The BT1517 Rail Mounting Fastener Set is used for mounting 1913 rails and consists of two (2) 10-32 T-Nuts and two (2) 10-32 x ¾" Button Head Cap Screws. Sold as a pair.These T-nuts are commonly used by stock builders to accommodate the installation of sling studs and rails. They are typically bedded into the stock from the barrel channel side as illustrated in the third image.Weight: 0.4 ounces
- The M6 x 80 x 80 Replacement Bolt is the same bolt we send standard with both the BT08-QK Accu-Shot Accuracy International (ASAI) Monopod and BT57-QK Accu-Shot Accuracy International AT Monopod.Available as a replacement.If additional length of pull spacers are being used, see our BT0857-LB: M6 x 80 x 100 Long Bolt
- The Groupy measures groups within a 1.5” diameter. Measurements are laser cut into acrylic with a glow-in-the-dark cord attached.Shoot three to five shots. Lay Groupy over shot group. Adjust until one of the circles cross the center of the two outer most holes. Read measurement on that circle to determine group size.
- The M6 x 80 x 100 Long Bolt is compatible with both the BT08-QK Accu-Shot Accuracy International (ASAI) Monopod and BT57-QK Accu-Shot Accuracy International AT Monopod.It is required if additional length of pull spacers are used with Accuracy International buttstocks that our BT08-QK and BT57-QK are being installed on.If you are needing a replacement standard bolt, see our BT0857-B: M6 x 80 x 80 Replacement Bolt
- The BT07 Tac-Cap is an optional steel cap that replaces the standard plastic cap found at the bottom of the monopod knob. It can damage soft surfaces and is intended for units that will experience hard surface use.Installation of the BT07 is friction-fit and requires no tools. However, we recommend permanently setting the BT07 and will do so at no additional charge when ordered along with any Accu-Shot Monopod, unless otherwise specified in the "comments" section. Available in black only.Weight: 0.35 ounces
- The BT83 B&T Microfiber Towel measures approximately 15 X 15" made from terry-style microfiber material. It features our B&T Logo measuring approximately 3" screen printed in the corner.Great all-purpose cleaning and dusting towels. Made for repeat use through multiple machine washes.Made in China. Screen printed in Wichita, KS, USA
- This poster is a battle field photo showing a U.S. Special Forces Sniper in a hide in An Najaf. He was using a 55 gallon drum and a piece of wood for a table, the light coming through the spider hole is the only illumination in this dark and dangerous setting, fitting for the; "Yea, though I walk through the valley of the shadow of death" 23 Psalms. Printed on 100# cover stock. Measures 16 x 20" and is sized ready to frame in a standard frame.
- U.S. Snipers Poker Playing Cards appear similar to the US08: U.S. Snipers Death Calling Card, but with playing card faces.
- We'll not only support your shooting, we'll support your beverage as well!The B&T coasters are 4" in diameter are made from two layers of poplin material with third layer of a plastic backing material. So while these look like patches and were made by a patch company, the three layers of materials is the stuff coasters are made of!Pack of four (4)
- The BT28-N AFAR Rail Nuts are the same nuts used with the BT28 AFAR Rail Kit. They are 4041 Alloy Steel fasteners. The uniquely designed rectangle nuts fit both Freeland and Anschutz style rails by rotating them 90°. Sold as a pair.Weight: 0.22 ounces
- The US10 ELC (Extremely Large Cards) - These oversized U.S. Sniper Calling Cards were created through our sponsorship of ELR (Extreme Long Range) competitions where the cards are shot beyond 1000 yards.The US10 ELC features our “Ace of Spades” logo printed with black thermography on heavy card stock just like the original US08 cards used for the Accu-Shot One-Shot Challenges™. They are blank on the back and measure 11 x 8.5".Quantity 1 = 10 individual cards for $15.95
- The BT03 M1-A/AR-15 Sling Stud Accessory replaces the standard Sling Loop found on many standard military style rifle stocks including the AR10, AR15 and M1A. Machined steel. Available in black only.Weight: 0.3 ounces
- Black Gildan 100% cotton T-shirt with U.S. Snipers Spade logo on back measuring about 12” high with a small 3” round U.S. Snipers logo on front left chest. The spade logo was a co-op job. Mike McMillan of CSM Gear suggested using the spade and our artist came up with the lettering and design.
Get FREE SHIPPING on standard, domestic USA orders over $99.00.
B&T Industries, LLC
WE ARE SUPPORT
SHOP
RESOURCES
SUPPORT
1 (316) 721 – 3222
Mon-Fri 8:00-4:30 CST
CAGE CODE 3L7F2
