Get FREE SHIPPING on standard, domestic USA orders over $99.00.

  • Apparel & Merch

    Apparel & Merch (14)

  • Accu-Shot Monopods

    Accu-Shot Monopods (18)

  • Atlas Bipods

    Atlas Bipods (37)

  • Accessories

    Accessories (61)

  • U.S. Snipers

    U.S. Snipers (9)

  • BLEMISHED

    BLEMISHED (23)

  • View Cart
    Add to cart / Details

    BT65-NC Gen. 2 CAL Atlas Bipod

    $264.95
    The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size "Lever Mount" such as the ADM-170-S, ARMS 17S, LT271 or most ARCA dovetail mount with the same hole pattern. *See below for mount compatibility specifications.The BT65-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.Adjustable, preloaded Cant with additional tension lever using original KMW “Pod-Loc®.” Read how to adjust the Pod-Loc® lever below.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Includes two 10-32 x 3/8" flathead socket screws. Available in black only.
    • Height Range: 4.8 - 9.2" (6.4” at 90°)
    • Preloaded Cant: 63 degrees
    • Position Button 0.5" diameter
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Larger, stronger inner legs
    • Weight: 12.7 ounces
    • Footprint: 9–12.5"
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT03: M1-A/AR-15 Sling Stud Accessory

    $18.95
    The BT03 M1-A/AR-15 Sling Stud Accessory replaces the standard Sling Loop found on many standard military style rifle stocks including the AR10, AR15 and M1A. Machined steel. Available in black only.Weight: 0.3 ouncesProudly designed, engineered, machined and assembled in america
  • View Cart
    Select options / Details

    BT06-QK: Extended Height Sling Stud Mount Accu-Shot® Precision Monopod

    $104.95 – $114.90
    The BT06-QK is our extended height Sling Stud Mount. Additional Thumbnut installed to LOCK the unit into a fixed elevation. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Includes one 3/32” Allen wrench to aid in proper installation. Available in black only.
    • Elevation Range: 5.70 – 6.85”
    • Folded Length: 5.95" approximate
    • Weight: 9.0 ounces
    NOTICE: PART BT03 REQUIRED FOR USE WITH M1A/AR FAMILY OF RIFLESHow to determine best size Accu-Shot Precision MonopodProudly designed, engineered, machined and assembled in america
  • BT07: Tac-Cap
    View Cart
    Add to cart / Details

    BT07: Tac-Cap Accessory

    $9.95
    The BT07 Tac-Cap is an optional steel cap that replaces the standard plastic cap found at the bottom of the monopod knob. It can damage soft surfaces and is intended for units that will experience hard surface use.Installation of the BT07 is friction-fit and requires no tools. However, we recommend permanently setting the BT07 and will do so at no additional charge when ordered along with any Accu-Shot Monopod, unless otherwise specified in the "comments" section. Available in black only.Weight: 0.35 ouncesProudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    US01: Scope Cap Pic

    $5.95
    This image is a print from the actual negative, no different than the one featured in the battle photograph. These are die cut at 1.5" in diameter and come ready to install. Proudly designed, engineered, machined and assembled in america
  • View Cart
    Select options / Details

    US03: U.S. Snipers Spade Shirt

    $19.95 – $22.95
    Black Gildan 100% cotton T-shirt with U.S. Snipers Spade logo on back measuring about 12” high with a small 3” round U.S. Snipers logo on front left chest. The spade logo was a co-op job. Mike McMillan of CSM Gear suggested using the spade and our artist came up with the lettering and design.
  • US04 - Sand T-Shirt
    View Cart
    Select options / Details

    US04: U.S. Snipers Sand Shirt

    $19.95 – $22.95
    Sand Gildan 100% cotton T-shirt with line art on the back of a SF sniper in Fallujah with text, “Converting terrorist one bullet at a time.” Features 3” round US Snipers logo on front left chest. Line art measures about 14” wide and created by a young lady free hand from a photo supplied by a member of the Special Forces.
  • View Cart
    Add to cart / Details

    US05: Psalms 23 Poster

    $10.95
    This poster is a battle field photo showing a U.S. Special Forces Sniper in a hide in An Najaf. He was using a 55 gallon drum and a piece of wood for a table, the light coming through the spider hole is the only illumination in this dark and dangerous setting, fitting for the; "Yea, though I walk through the valley of the shadow of death" 23 Psalms. Printed on 100# cover stock. Measures 16 x 20" and is sized ready to frame in a standard frame.
  • View Cart
    Add to cart / Details

    US06: U.S. Snipers Poker Playing Cards

    $10.95
    U.S. Snipers Poker Playing Cards appear similar to the US08: U.S. Snipers Death Calling Card, but with playing card faces.Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    US07: U.S. Snipers Sticker

    $5.95
    Appears as the US08: U.S. Snipers Death Calling Card, but are stickers with adhesive on the back.Quantity 15 for $5.00Proudly designed, engineered, machined and assembled in america
  • US08 - ASOSC Cards
    View Cart
    Add to cart / Details

    US08: U.S. Snipers Calling Cards

    $5.95
    These started it all. The U.S. Snipers Calling Cards featuring our “Ace of Spades” logo printed with black thermography on heavy cardstock. Same cards used for the Accu-Shot One-Shot Challenges™. They are blank on the back and measures 2.5 x 3.5".Quantity 1 = 20 individual cards for $5.95 Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT11: “Peace Symbol” Bumper Sticker

    $6.95
    The “Peace Symbol” bumper sticker is a great way to share your thoughts with friends and family! We thank the fine folks at Black Hills Ammo for allowing us to use their idea in our own unique way.Quantity 5Dimensions: 9.25 x 2.625”Made in America.
  • View Cart
    Select options / Details

    BT05-QK: Mid-Height Sling Stud Mount Accu-Shot® Precision Monopod

    $99.95 – $109.90
    The BT05-QK is our mid-height Sling Stud Mount. Additional Thumbnut installed to LOCK the unit into a fixed elevation. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Includes one 3/32” Allen wrench to aid in proper installation.Available in black only.
    • Elevation Range: 4.80 – 5.85"
    • Folded Length: 4.95" approximate
    • Weight: 8.2 ounces
    NOTICE: PART BT03 REQUIRED FOR USE WITH M1A/AR FAMILY OF RIFLESHow to determine best size Accu-Shot Precision MonopodProudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT14: Magpul PRS Threaded Sling Studs

    $6.95
    The BT14 Magpul PRS Threaded Sling Studs replace one of the four Socket Button Head Cap Screws found on the Magpul Precision Rifle Stock (PRS) with a sling stud. The threaded straps that come standard with the PRS can be reversed giving a total of 8 choices for stud placement. Each BT14 comes with two Sling Studs having 10-24 threads and black polymer spacers.
    • Overall Length: 1.625"
    • Length of Threaded Portion: 0.625"
    • Length of Shaft Overall: 1.25"
    • Weight: 0.5 ounces
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Select options / Details

    BT13-QK: Mid-Height Accu-Shot® Precision Rail Monopod

    $104.95 – $114.90
    The BT13-Qk is our mid-height Precision Rail Monopod (PRM) with QK02 Quick Knob. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
    • Elevation Range: 4.75 – 5.65”
    • Folded Length: 4.80" approximate
    • Weight: 8.3 ounces
    How to determine best size Accu-Shot Precision MonopodProudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT15: 3.35″ 1913 Picatinny Rail

    $34.95
    The BT15 - 3.35" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 1.76 – 2.78" and a relieved back to accommodate curved surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels and sling studs (neither provided).A standard sling stud and sling stud spacer can be used as one fastener or two button head machine screws can be used. NO HARDWARE INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks. Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.Weight: 0.92 ouncesProudly designed, engineered, machined and assembled in america
  • View Cart
    Select options / Details

    BT16: We Support Diplomacy

    $19.95 – $22.95
    The “We Support Diplomacy” shirt features a rifle of our design being supported by our Accu-Shot PRM Monopod and PSR Atlas Bipod with Spiked Cleated Feet. Text reads, "We Support Diplomacy” with “the last 600 yards of” in a smaller font between “Support” and “Diplomacy”.Artwork and text are white printed onto a navy Gildan 100% cotton T-shirt. The front has a “B&T” circle logo on the front chest with “Bitter & Twisted” below.
  • View Cart
    Add to cart / Details

    BT10 V8 Atlas Bipod

    $229.95
    The BT10 V8 Atlas Bipod mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only.Selected for SOCOM MK14 MOD 2. NSN 1005-01-601-0007 (for complete system)
    • Height Range: 4.8 - 9.1" (6.3” at 90°)
    • Preloaded Pan: 30 degrees
    • Preloaded Cant: 30 degrees
    • Position Button 0.36" diameter
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Weight: 11.0 ounces approx.
    • Footprint: 8–11"
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT10-NC V8 Atlas Bipod

    $229.95
    The BT10-NC V8 Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount such as the ADM-170-S, ARMS 17S, LT271 or any ARCA dovetail mount with the same hole pattern. *See below for mount compatibility specifications.The BT10-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Includes two 10-32 x 3/8" flathead socket screws. Available in black only.
    • Height Range: 5 - 9.4" (6.5” at 90°)
    • Preloaded Pan: 30 degrees
    • Preloaded Cant: 30 degrees
    • Position Button 0.36" diameter
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Weight: 10.8 ounces approx.
    • Footprint: 8–11"
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT10-LW17 V8 Atlas Bipod

    $294.95
    The BT10-LW17 V8 Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only.NSN 1005-01-623-6257
    • Height Range: 5.2 - 9.6" (6.8” at 90°)
    • Preloaded Pan: 30 degrees
    • Preloaded Cant: 30 degrees
    • Position Button 0.36" diameter
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Weight: 12.7 ounces approx.
    • Footprint: 8–11"
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT17: 4″ 1913 Picatinny Rail

    $34.95
    The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels and sling studs (neither provided).A standard sling stud and sling stud spacer or two button head machine screws can be used as a fastener. NO HARDWARE INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks. Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.Weight: 1.20 ouncesProudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT22: Atlas Leg Extensions

    $59.95
    The BT22 Atlas Leg Extensions are easily installed to any V8, PSR or CAL series Atlas Bipod with the press of a stainless steel plunger. They provide an additional 3 inches of elevation and accept any of our optional V8, PSR or CAL feet. They will also fit bipods/adapters that use Atlas feet. Sold as a pair. Available in black only. NSN 1005-01-641-0369Total Weight of Pair: 1.8 ounces 

    Product will work on V8, PSR and CAL models only.

    Proudly designed, engineered, machined and assembled in america

  • BT23: Atlas Ski Feet
    View Cart
    Add to cart / Details

    BT23: Atlas Ski Feet

    $59.95
    The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL series Atlas Bipod with the press of a stainless steel plunger. They will lay flat in the 90 degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod. They will also fit bipods/adapters that use Atlas feet. Sold as a pair. Available in black only. NSN 1005-01-640-8881Total Weight of Pair: 1.5 ounces

    Product will work on V8, PSR and CAL models only.

    Proudly designed, engineered, machined and assembled in america

  • View Cart
    Add to cart / Details

    BT1517: Rail Mounting Fastener Set

    $6.95
    The BT1517 Rail Mounting Fastener Set is used for mounting 1913 rails and consists of two (2) 10-32 T-Nuts and two (2) 10-32 x ¾" Button Head Cap Screws. Sold as a pair.These T-nuts are commonly used by stock builders to accommodate the installation of sling studs and rails. They are typically bedded into the stock from the barrel channel side as illustrated in the third image.Weight: 0.4 ounces Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT19: Atlas Accuracy International Spigot

    $79.95
    The BT19 Atlas Accuracy International Spigot (AAIS) is designed for use with any NC (No Clamp) style Atlas Bipod that mounts directly to the AAIS which plugs into the Accuracy International AI/AICS stocks utilizing the factory retention/release mechanism.The evolution of long range shooting and shooter's demand drove subtle changes to the BT19. The latest modification stops the 3 to 9 rotation.It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized mated with an alloy steel Spigot that is finished with a Manganese Phosphate. Includes two (2) 10-32 x 1" flat head socket cap screws. Available in black only.Weight: 4.7 ouncesProudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT20: Atlas Accuracy International Spigot Rail Set

    $59.95
    The BT20 Atlas Accuracy International Spigot (AAIS) Rail Set consists of three pieces of 1913 rail that can be attached to the BT19 AAIS on the bottom and both sides. This accommodates for a multitude of options including the mounting of any rail mounted Atlas Bipod.For the bottom rail only, check out our BT20-B.Each rail is machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only. Includes four (4) 10-32 x 5/8" flat head socket cap screws.
    • Length: 1.6" each
    • Weight: 2.2 ounces
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT26: CAR Adaptor

    $39.95
    The BT26 CAR Adaptor installed on your CAR collapsible stock allows any of our Precision Rail Monopod style monopods to be installed. This is a great option for shooters that want the LOP adjustments available with a collapsible stocks, but want the stability provided by the Accu-Shot. The BT26 replaces the factory loop on the stock while providing the means to re-attach the fixed sling loop with the loop on the left, right or bottom angled forward or backward. It is made of 1018 Cold Rolled Steel and treated with magnesium phosphate. Available in black only.Weight: 1.1 ounceProudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT28: AFAR Rail Kit

    $39.95
    The BT28 AFAR Rail Kit will mount into accessory rails and provide a low profile 1913 Picitinny rail for attaching the Atlas Bipods or other accessories. This is a great option for shooters that have accessory rails and want to use their rail mounted Atlas on several rifles.The uniquely designed rectangle nuts (BT28-N) fit both Freeland and Anschutz style rails by rotating them 90°.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish with 4041 Alloy Steel fasteners. Includes two rectangle nuts, two (2) 10-32 x 3/8" flat head socket cap screws and two (2) 10-32 x 1/2" flat head socket cap screws. Available in black only.
    • Length: 2.05"
    • Weight: 0.89 ounces
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT29: Sako TRG Rail Kit

    $39.95
    The BT29 Sako TRG Rail Kit comes complete and ready to install onto your TRG stock. The kit allows for the installation of the BT12-QK Accu-Shot Precision Rail Monopod (BT12-QK is shown but not included). It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only. Weight: 1.15 ouncesInstallation of the BT29 REQUIRES the temporary removal of the butt pad assembly and drilling of a second hole. Although, this can be accomplished with common hand tools, B&T Industries L.L.C. strongly recommends a competent Gunsmith install the BT29 Sako TRG Rail Kit.Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT30-C: Coyote Brown Atlas Bipod Pouch

    $59.95
    The BT30-C Coyote Brown Atlas Bipod Pouch accommodates all V8, Standard PSR and CAL model Atlas Bipods. They offer a pocket for the Atlas Leg Extensions and another for optional Atlas feet.It does NOT accept the 5-H, Super CAL or Tall PSR/CAL models.Made out of 1000 denier cordura nylon. Also available in Ranger Green and Black.Weight: 7.9 ouncesProudly designed, engineered, machined and assembled in america
  • View Cart
    Select options / Details

    BT04-QK: Standard Height Sling Stud Mount Accu-Shot® Precision Monopod

    $94.95 – $104.90
    The BT04-QK is our standard height Sling Stud Mount. Additional Thumbnut installed to LOCK the unit into a fixed elevation. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Includes one 3/32” Allen wrench to aid in proper installation. Available in black only.
    • Elevation Range: 3.75 – 4.85”
    • Folded Length: 3.95"
    • Weight: 7.3 ounces
    NOTICE: PART BT03 REQUIRED FOR USE WITH M1A/AR FAMILY OF RIFLESHow to determine best size Accu-Shot Precision MonopodProudly designed, engineered, machined and assembled in america
  • View Cart
    Select options / Details

    BT12-QK: Standard Height Accu-Shot® Precision Rail Monopod

    $99.95 – $109.90
    The BT12-QK is our standard height Precision Rail Monopod (PRM) with QK01 Quick Knob. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only. NSN 1005-01-678-1553
    • Elevation Range: 3.75 – 4.65”
    • Folded Length: 3.85" approximate
    • Weight: 7.4 ounces
    How to determine best size Accu-Shot Precision MonopodProudly designed, engineered, machined and assembled in america
  • View Cart
    Select options / Details

    BT31-QK: Extended Height Accu-Shot® Precision Rail Monopod

    $109.95 – $119.90
    The BT31-QK is our extended height Precision Rail Monopod (PRM) with QK03 Quick Knob. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
    • Elevation Range: 5.65 – 6.60"
    • Folded Length: 5.80" approximate
    • Weight: 9.0 ounces
    How to determine best size Accu-Shot Precision MonopodProudly designed, engineered, machined and assembled in america
  • View Cart
    Select options / Details

    BT01-QK: Standard Height Sling Stud Mount Accu-Shot® Precision Monopod

    $79.95 – $89.90
    The BT01-QK is our standard height Sling Stud Mount Accu-Shot Monopod. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Includes one 3/32” Allen wrench to aid in proper installation. Available in black only.
    • Elevation Range: 3.50 – 4.65"
    • Folded Length: 3.65" approximate
    • Weight: 6.5 ounces
    NOTICE: PART BT03 REQUIRED FOR USE WITH M1A/AR FAMILY OF RIFLESHow to determine best size Accu-Shot Precision MonopodUSA-Flag_Proudly-In-America.png
  • View Cart
    Add to cart / Details

    BT30-R: Ranger Green Atlas Bipod Pouch

    $59.95
    The BT30-R Ranger Green Atlas Bipod Pouch accommodates all V8, Standard PSR and CAL model Atlas Bipods. They offer a pocket for the Atlas Leg Extensions and another for optional Atlas feet.It does NOT accept the 5-H, Super CAL or Tall PSR/CAL models.Made out of 1000 denier cordura nylon. Also available in Coyote Brown and Black. Weight: 7.9 ouncesProudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT30-B: Black Atlas Bipod Pouch

    $59.95
    The BT30-B Black Atlas Bipod Pouch accommodates all V8, Standard PSR and CAL model Atlas Bipods. They offer a pocket for the Atlas Leg Extensions and another for optional Atlas feet.It does NOT accept the 5-H, Super CAL or Tall PSR/models.Made out of 1000 denier cordura nylon. Also available in Coyote Brown and Ranger Green. Weight: 7.9 ouncesProudly designed, engineered, machined and assembled in america
  • BT32: Atlas Rubber Feet
    View Cart
    Add to cart / Details

    BT32: Atlas Standard Rubber Feet

    $24.95
    The BT32 Atlas Standard Rubber Feet are standard equipment on all V8, PSR or CAL series Atlas Bipods. They will also fit bipods/adapters that use Atlas feet. Easily installed with the press of a stainless steel plunger. Sold as a pair. Available in black only.Weight: 1.0 ounceProudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT34: 2.05″ 1913 Picatinny Rail

    $29.95
    The BT34 - 2.05" 1913 Picatinny Rail has a center to center spacing of 1.6". Two machine screws can be used not included, see BT1517) to attach this rail to the forearm of standard rifle stocks. It can also be attached to a horizontal surface on the Butt section to attach our Precision Rail Monopods.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. NO HARDWARE INCLUDED. Available in black only.Weight: 0.4 ouncesProudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    US09: U.S. Snipers Sign

    $24.95
    U.S. Snipers Sign reads, “No Trespassing Live Fire Range.” It measures 10 x 14" with two 1/4" holes centered top and bottom and are .063 thick Aluminum with a reflective background. Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT21: Atlas TRG Bracket

    $59.95
    The BT21 Atlas TRG Bracket (ATB) is designed for use with the Sako TRG line of rifles that utilize the TRG bipod attachment slot with 0.42" hole spacing. The ATB provides a forward mounting position which is also closer to the bore-line.It is designed for use with either the 2-screw clamp (BT10, BT65, BT69, BT72) or quick detach lever (indicated by "LW17") models of Atlas Bipods, which would mount directly to the Picatinny Rail portion of the ATB.Although the No Clamp (NC) models can be mounted onto the ATB, it requires installation of the bipod during the installations of the ATB prior to reassembly of stock. THIS RESULTS IN A SEMI-PERMANENT, DEDICATION OF THE BIPOD TO THAT PARTICULAR RIFLE.The ATB is constructed from 6061-T6 Aluminum with a Type III hard anodized finish and heat treated alloy steel with a Manganese Phosphate finish. Available in black only. Fasteners included: two (2) M5 - .8 x 10” flat head socket cap screws, two (2) 10-32 x 3/4” flat head socket cap screws and two (2) 10-32 x 5/8” flat head socket cap screws
    • Length: 3.83"
    • Weight: 5.03 ounces
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT20-B: Atlas Accuracy International Spigot Bottom Rail

    $29.95
    The BT20-B Atlas Accuracy International Spigot Bottom Rail is the same rail found in the BT20, but consists of the bottom 1913 rail ONLY. It attaches to the bottom of the BT19 AAIS via blind threaded 10/32 holes and has a two hole pattern of 1.100" (see third image).To utilize the quick detach lever on our “LW17” style of Atlas Bipods OR the 2-screw mount style of Atlas Bipods, it is compatible with the following:• Any ARCA clamp with a matching hole pattern. We offer Area 419's ARCALOCK Clamp separately OR together as a complete unit: BT20-B/ARCALOCK Clamp (see fourth image)• Any Picatinny clamp with matching hole pattern. We offer American Defense's ADM-170-S separately OR together as a complete unit: BT43 Leveraged Rail (see fifth image)• Arisaka's Picatinny Rail SliderMachined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only. NO HARDWARE INCLUDED. 10-32 x 3/8" Flathead Socket Screws available separately.
    • Length: 1.60"
    • Weight: 0.57 ounces
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT33: Tube Rail Kit

    $44.95
    The BT33 Tube Rail Kit consists of a Steel Bar Nut, designed to fit inside free float tubes, and a low profile 1913 Picatinny rail 2.05" long with a 1.00" radius back and a center-to-center spacing of 1.602 between the holes.The BT33 is installed with the Steel Bar Nut inside the free float tube and the 1913 Picatinny rail on the outside with the matching holes aligned. Fastened together, they allow the attaching of the Atlas Bipod or other accessories to free float tubes.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Manganese phosphate finish on the steel bar nut. Hardware included. Available in black only.
    • Length: 2.05"
    • Weight: 1.3 ounces
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT38: B&T Coasters

    $12.95
    We'll not only support your shooting, we'll support your beverage as well!The B&T coasters are 4" in diameter are made from two layers of poplin material with third layer of a plastic backing material. So while these look like patches and were made by a patch company, the three layers of materials is the stuff coasters are made of!Pack of four (4)
  • View Cart
    Add to cart / Details

    BT41: B&T Letter Opener

    $299.95
    B&T Industries L.L.C. is proud to create a letter opener for our customers that want to have a serious desktop accoutrement with purpose and function. We machined the Handle and Pommel from 300 series Stainless Steel then tumbled to compliment the blade. The blade, made by Spartan Blades, is machined from 440C Stainless Steel given a Rockwell Hardness of C 58-59 with a Cyro treatment followed by Alumina then Ceramic Blast and finally a PVD Chromium coating.The two Buna o-rings prevent rattling when sheathed for a stealthy presentation. The double ground edges along the length of the blade are not sharp, but the point is sharp. More specification and details below.Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT39: AI Monopod Bracket (AIMB)

    $49.95
    The BT39 AI Monopod Bracket (AIMB) is an adapter required to attach the BT08-QK ASAI monopod (used with the original “legacy” AI style stocksides) to the new Accuracy International “Gen 2” style stocksides. It is machined from 4140 steel with a manganese phosphate finish. Modification to the Buttstock Stocksides (skins) is required to accept the BT39 AIMB.The BT39 AIMB is mounted to the AI frame using your existing BT08 Stock Collar Fastener (this fastener is not included in the BT39, it is included with the BT08) being threaded to the lower AI butt pad bolt. The BT08 is then attached to the BT39 AIMB by means of the supplied 5/16-24 socket head cap screw.Weight: 5.4 ouncesProudly designed, engineered, machined and assembled in america
  • BT43: Leveraged Rail IMG1
    View Cart
    Add to cart / Details

    BT43: Leveraged Rail

    $99.95
    The BT43 Leveraged Rail is a BT20-B and an American Defense ADM-170-S lever as a complete assembly. It provides the means to quickly attach/detach any rail attached accessory to include our Atlas Bipods and Precision Rail Monopods. The BT20-B is machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.
    • Length: 1.6"
    • Bottom of rail to bottom of BT20-B rail: 0.58"
    • Weight: 2.5 ounces
    Proudly designed, engineered, machined and assembled in america
  • ADM-170-S Stock IMG
    View Cart
    Add to cart / Details

    ADM-170-S: Atlas Accessory

    $93.60
    The ADM-170-S base is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems. It has two hole pattern of 1.100”.This lever is manufactured by American Defense MFG, LLC NOT by B&T Industries, LLC and is used on our V8, PSR, CAL and Super CAL models of Atlas Bipods. All warranty issues are to be processed through American Defense MFG, LLCWeight: 1.905 ouncesProudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT40: Bitter & Twisted Mortar Model Display

    $1,349.95
    B&T Industries L.L.C. is proud to offer our Bitter & Twisted Mortar model display. The mortar model is constructed from turned and stamped Stainless Steel and quarter sawn American White Oak.The Mortar Barrel and Pinions are turned from 303 stainless steel bar stock with bored trunnion pockets. The trunnions are pressed into the pockets then welded in place. They rest on a pair of stainless steel bearing plates in the Mortar model Base and is retained by a pair of Stainless Steel Top Straps via two ¼-20 Stainless Steel Button Head cap screws per strap. They pass through the straps then into the side and thread into the Stainless Steel handle found on each Side of the Base. Strength is obtained and secured by steel on steel threads.Proudly designed, engineered, machined and assembled in america
  • BT08-QK Bolt
    View Cart
    Add to cart / Details

    BT0857-B: M6 x 80 x 80 Replacement Bolt

    $7.95
    The M6 x 80 x 80 Replacement Bolt is the same bolt we send standard with both the BT08-QK Accu-Shot Accuracy International (ASAI) Monopod and BT57-QK Accu-Shot Accuracy International AT Monopod.Available as a replacement.If additional length of pull spacers are being used, see our BT0857-LB: M6 x 80 x 100 Long BoltProudly designed, engineered, machined and assembled in america
  • BT45 Savage 110BA Fore-end Rail
    View Cart
    Add to cart / Details

    BT45: Savage 110BA Fore-end Rail

    $39.95
    The BT45 Savage 110BA Fore-end Rail (SFR) will mount using the existing Sling Stud bracket holes on the Savage 110BA fore-end without modification. Once installed it will provide a low profile 1913 Picatinny rail for attaching the Atlas Bipod or other accessories to your Savage 110BA.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish with 4041 Alloy steel fasteners having a Manganese Phosphate finish. Available in black only.The newer version of the Savage 110BA has a different hole spacing with a single hole and slots. We strongly recommend confirming the center-to-center hole spacing of 0.506" to ensure proper fit of the BT45. See image.
    • Length: 1.6"
    • Weight: 0.8 ounces
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT28-N: AFAR Rail Nuts

    $12.95
    The BT28-N AFAR Rail Nuts are the same nuts used with the BT28 AFAR Rail Kit. They are 4041 Alloy Steel fasteners. The uniquely designed rectangle nuts fit both Freeland and Anschutz style rails by rotating them 90°. Sold as a pair.Weight: 0.22 ouncesProudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT49: 2.05″ 1913 Adjustable Picatinny Rail

    $29.95
    The BT49 - 2.05" 1913 Adjustable Picatinny Rail has a center-to-center spacing of 1.2 - 1.6". Two machine screws can be used (not included, see BT1517) to attach this rail to the forearm of standard rifle stocks. Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish.The BT49 can also be attached to a horizontal surface on the Butt section to attach our Precision Rail Monopods. NO HARDWARE INCLUDED. Available in black only.
    • Length: 2.05"
    • Weight: 0.4 ounces
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Select options / Details

    BT48: Thieves

    $19.95 – $22.95
    Grey Gildan 100% cotton T-shirt with “B&T” circle logo on the front chest with “Bitter & Twisted” below. On the back is the image seen with the following phrase in both English and Chinese:

    We just want to make sure the thieves know…Atlas Precision Bipods® & Accu-Shot Precision Monopods® registered trademark patent owner is B&T Industries L.L.C...All B&T products are made in the USA and we are proud of it.

  • View Cart
    Add to cart / Details

    BT46-LW17 PSR Atlas Bipod: Standard height with ADM-170-S Lever

    $354.95
    The BT46-LW17 PSR (Precision Sniper Rifle) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever.It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Available in black only.Selected for the SOCOM PSR (Precision Sniper Rifle) Weapons System. NSN 1005-01-663-0038
    • Height Range: 5.2 - 9.6" (6.8” at 90°)
    • Preloaded Pan: 30 degrees
    • Preloaded Cant: 30 degrees
    • Position Button 0.5" diameter
    • Fore and Aft pivot limiting Bosses
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Larger, stronger inner legs
    • Weight: 13.61 ounces approx.
    • Footprint: 8–11"
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT46-NC PSR Atlas Bipod: Standard height No Clamp

    $289.95
    The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount such as the ADM-170-S, ARMS 17S, LT271 or any ARCA dovetail mount with the same hole pattern. *See below for mount compatibility specifications.The BT46-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Includes two 10-32 x 3/8" flathead socket screws. Available in black only.The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR). 
    • Height Range: 5 - 9.4" (6.5” at 90°)
    • Preloaded Pan: 30 degrees
    • Preloaded Cant: 30 degrees
    • Position Button 0.5" diameter
    • Fore and Aft pivot limiting Bosses
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Larger, stronger inner legs
    • Weight: 11.42 ounces approx.
    • Footprint: 8–11"
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT47-LW17 PSR Atlas Bipod: Tall with ADM 170-S Lever

    $374.95
    The BT47-LW17 PSR (Precision Sniper Rifle) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever.It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Available in black only.The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR).
    • Height Range: 6.4 - 12.8" (8.5” at 90°)
    • Preloaded Pan: 30 degrees
    • Preloaded Cant: 30 degrees
    • Position Button 0.5" diameter
    • Fore and Aft pivot limiting Bosses
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Larger, stronger inner legs
    • Weight: 15.13 ounces approx.
    • Footprint: 10-14.5"
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT51: ACE Bracket

    $49.95
    The BT51 ACE bracket was designed for the popular A.C.E. Skeleton Stock and provides the means to attach an Accu-Shot Precision Rail Monopod (BT12-QK, BT13-QK and BT31-QK) to your A.C.E. Skeleton Stock. It is machined from 6061-T6 aluminum Mil-Spec Type III hard anodized. Besides the Picatinny rail for the PRM, the BT51 has two flush cups for attaching slings. The two piece bracket is clamped to the angular tube and is held in place with the four supplied SHCS fasteners. No modification is required. A 5/32 hex wrench is required but NOT included. Available in black only.Weight: 2.9 ouncesProudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT52: ACS/STR Picatinny Rail Adapter

    $44.95
    The BT52 ACS/STR Picatinny Rail Adaptor for the popular Magpul ACS and STR style stocks provides the means to attach an Accu-Shot Precision Rail Monopod (BT12-QK, BT13-QK and BT31-QK) to your Magpul ACS and STR Stock. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized and steel. The two piece adaptor replaces the polymer insert found on these stocks and is held in place with the supplied fasteners. Other than removing the buttpad and sliding the insert out, no modification is required. A 1/8 hex wrench is required but NOT included. Available in black only.Weight: 1.0 ounceProudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT53: SILO

    $99.95
    The BT53 SILO is a novel and patented product that attaches by means of a Picatinny rail. It provides a textured front that can be pressed into barricades, rubber side bars for “soft” side bracing and grip, 600 denier cordura "bean-bag" bottom for “soft” interface on ledges, windows etc. and two flush cups.One of the two flush cups is designed to accept our novel BT54 Flush Cup Stud (NOT included with purchase of a BT53). It is an option sold separately that allows the BT53 SILO to be easily installed, moved and removed with the push of a button.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized.
    • Length Approx: 3.75"
    • Width Approx: 2.36"
    • Height Approx: 1.78"
    • Weight: 7.8 ounces
    Proudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    BT54: Flushcup Stud

    $19.95
    The BT54 Flushcup Stud is a novel means to quickly install, move or remove accessories to a Picatinny rail, IF the accessory has a corresponding flushcup hole that aligns with the slots of the Picatinny rail. The BT54 was conceived and designed for use with our BT53 SILO. Available in black only.Weight: 1.0 ounceProudly designed, engineered, machined and assembled in america
  • View Cart
    Add to cart / Details

    Disassembly Service for Your Atlas Bipod

    $75.00
    For anyone that wishes to apply a finish to a currently owned B&T Atlas Bipod:When applying an aftermarket finish that requires the use of heat or disassembly to any B&T Atlas Bipod, we respectfully ask that you send that product to us so we can properly disassemble and return all appropriate parts to you for application of the finish.Once the finish is applied and the parts are returned to B&T, we will reassemble them to our specifications and ship it back to you. Please ensure parts are packaged appropriately to avoid any damage in transit. B&T will not be responsible for the finish or any damage to the finish.Anyone that disassembles, loses or breaks any parts in an attempt to disassemble/reassemble their Atlas Bipod will be charged $105.00 plus parts minimum.Anyone choosing not to use this service does so at their own risk and liability voiding the bipod's Lifetime Warranty.B&T Industries L.L.C. does not sell or ship parts.
  • Sale!
    ADM-170-S Stock IMG
    View Cart
    Add to cart / Details

    BLEMISHED ADM-170-S: Atlas Accessory

    $79.56
    The ADM-170-S base is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.This lever is manufactured by American Defense Manufacturing NOT by B&T Industries L.L.C. and is used on our Atlas, PSR and CAL models.Weight: 1.905 ounces
  • Sale!
    View Cart
    Add to cart / Details

    BLEMISHED BT01-QK: Standard Height Sling Stud Mount Accu-Shot® Precision Monopod

    $67.96
    The BT01-QK is our standard height Sling Stud Mount with QK01 Quick Knob. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
    • Elevation Range: 3.50 – 4.65"
    • Folded Length: 3.65" approximate
    • Weight: 6.5 ounces
    NOTICE: PART BT03 REQUIRED FOR USE WITH M1A/AR FAMILY OF RIFLESHow to determine best size Accu-Shot Precision MonopodProudly designed, engineered, machined and assembled in america
  • Sale!
    View Cart
    Add to cart / Details

    BLEMISHED BT04-QK: Standard Height Sling Stud Mount Accu-Shot® Precision Monopod

    $80.71
    The BT04-QK is our standard height Sling Stud Mount with QK01 Quick Knob. Additional Thumbnut installed to LOCK the unit into a fixed elevation. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
    • Elevation Range: 3.75 – 4.85”
    • Folded Length: 3.95"
    • Weight: 7.3 ounces
    NOTICE: PART BT03 REQUIRED FOR USE WITH M1A/AR FAMILY OF RIFLESHow to determine best size Accu-Shot Precision MonopodProudly designed, engineered, machined and assembled in america
  • Sale!
    View Cart
    Add to cart / Details

    BLEMISHED BT47-NC PSR Atlas Bipod: Tall No Clamp*

    $263.46
    The BT47-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any Arca dovetail mount with the same hole pattern. The BT47-NC will also mount directly to our BT19 AI Spigot and BT70 M-LOK AdaptorIt is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR). Includes two 10-32 x 3/8" flathead socket screws. Available in black only.
    • Height Range: 7.0 – 13.0" approximately
    • Preloaded Pan: 15 degrees +/-
    • Preloaded Cant: 15 degrees +/-
    • 5 leg positions: 0, 45, 90, 135 and 180 degrees
    • Fore and Aft pivot limiting Bosses
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Larger, stronger inner legs
    • Weight: 12.86 ounces
    • Footprint: 10 – 14.5"
  • Sale!
    View Cart
    Add to cart / Details

    BLEMISHED BT10-NC V8 Atlas Bipod*

    $195.46
    The BT10-NC V8 Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any ARCA dovetail mount with the same hole pattern. The BT10-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Includes two 10-32 x 3/8" flathead socket screws. Available in black only.
    • Height Range: 5 - 9.4" (6.5” at 90°)
    • Preloaded Pan: 30 degrees
    • Preloaded Cant: 30 degrees
    • Position Button 0.36" diameter
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Weight: 10.8 ounces approx.
    • Footprint: 8–11"
    *To make your Blemished BT10-NC a BT10-LW17, add an ADM-170-S Lever to your cart. They are not blemished and sold at full retail price. If added to your cart, we will install the lever onto the bipod in your cart unless otherwise specified in the "Comments" section. 
  • Sale!
    View Cart
    Add to cart / Details

    BLEMISHED BT46-NC PSR Atlas Bipod: Standard height No Clamp*

    $246.46
    The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, LT271 or any ARCA dovetail mount with the same hole pattern. The BT46-NC will also mount directly our BT19 AI Spigot or BT70 M-LOK® Adapter.It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Includes two 10-32 x 3/8" flathead socket screws. Available in black only.The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR). 
    • Height Range: 5 - 9.4" (6.5” at 90°)
    • Preloaded Pan: 30 degrees
    • Preloaded Cant: 30 degrees
    • Position Button 0.5" diameter
    • Fore and Aft pivot limiting Bosses
    • 5 leg positions: 0, 45, 90, 135 & 180 degrees
    • Non-Rotating Legs: outer leg does not rotate around inner leg
    • Larger, stronger inner legs
    • Weight: 11.42 ounces approx.
    • Footprint: 8–11"
  • Sale!
    View Cart
    Add to cart / Details

    BLEMISHED BT05-QK: Mid-Height Sling Stud Mount Accu-Shot® Precision Monopod

    $84.96
    The BT05-QK is our mid-height Sling Stud Mount with QK02 Quick Knob. Additional Thumbnut installed to LOCK the unit into a fixed elevation. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
    • Elevation Range: 4.80 – 5.85"
    • Folded Length: 4.95" approximate
    • Weight: 8.2 ounces
    NOTICE: PART BT03 REQUIRED FOR USE WITH M1A/AR FAMILY OF RIFLESHow to determine best size Accu-Shot Precision MonopodProudly designed, engineered, machined and assembled in america
  • Sale!
    View Cart
    Add to cart / Details

    BLEMISHED BT06-QK: Extended Height Sling Stud Mount Accu-Shot® Precision Monopod

    $89.21
    The BT06-QK is our extended height Sling Stud Mount with QK03 Quick Knob. Additional Thumbnut installed to LOCK the unit into a fixed elevation. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
    • Elevation Range: 5.70 – 6.85”
    • Folded Length: 5.95" approximate
    • Weight: 9.0 ounces
    NOTICE: PART BT03 REQUIRED FOR USE WITH M1A/AR FAMILY OF RIFLESHow to determine best size Accu-Shot Precision MonopodProudly designed, engineered, machined and assembled in america
  • Sale!
    View Cart
    Add to cart / Details

    BLEMISHED BT12-QK: Standard Height Accu-Shot® Precision Rail Monopod

    $84.96
    The BT12-QK is our standard height Precision Rail Monopod (PRM) with QK01 Quick Knob. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only. NSN 1005-01-678-1553
    • Elevation Range: 3.75 – 4.65”
    • Folded Length: 3.85" approximate
    • Weight: 7.4 ounces
    How to determine best size Accu-Shot Precision MonopodProudly designed, engineered, machined and assembled in america
  • Sale!
    View Cart
    Add to cart / Details

    BLEMISHED BT13-QK: Mid-Height Accu-Shot® Precision Rail Monopod

    $89.21
    The BT13-Qk is our mid-height Precision Rail Monopod (PRM) with QK02 Quick Knob. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
    • Elevation Range: 4.75 – 5.65”
    • Folded Length: 4.80" approximate
    • Weight: 8.3 ounces
    How to determine best size Accu-Shot Precision MonopodProudly designed, engineered, machined and assembled in america
  • Sale!
    View Cart
    Add to cart / Details

    BLEMISHED BT31-QK: Extended Height Accu-Shot® Precision Rail Monopod

    $93.46
    The BT31-QK is our extended height Precision Rail Monopod (PRM) with QK03 Quick Knob. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
    • Elevation Range: 5.65 – 6.60"
    • Folded Length: 5.80" approximate
    • Weight: 9.0 ounces
    How to determine best size Accu-Shot Precision MonopodProudly designed, engineered, machined and assembled in america
B&T Industries, LLC

WE ARE SUPPORT

SHOP

RESOURCES

SUPPORT

1 (316) 721 – 3222
Mon-Fri 8:00-4:30 CST
CAGE CODE 3L7F2
identity theft protected Copyright 2004-2021 B&T Industries, L.L.C. | Contact Us | Website Dev. by Insite Motion
Go to Top