- Length: 2.05"
- Weight: 0.4 ounces
- The BT49 - 2.05" 1913 Adjustable Picatinny Rail has a center-to-center spacing of 1.2 - 1.6". Two machine screws can be used (not included, see BT1517) to attach this rail to the forearm of standard rifle stocks. Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish.The BT49 can also be attached to a horizontal surface on the Butt section to attach our Precision Rail Monopods. NO HARDWARE INCLUDED. Available in black only.
- "Experience the blend of reliability and lightness with the BTC-Pro clamp. This screw knob clamp offers precise control, ensuring secure attachment of your equipment while shedding unnecessary weight. For photographers and outdoor enthusiasts seeking the optimal balance between strength and portability, the BTC-Pro is your ultimate companion. No compromise on durability, no added burden - that's the BTC-Pro promise." - Really Right Stuff SOAR DivisionThe BTC-Pro Bipod Clamp's Dual Combination Jaw allows for the attachment to either a Picatinny Rail or RRS 1.5" Dovetail Standard. It will bolt directly to any “NC” (No Clamp) style of Atlas Bipods (except the 5-H which requires Extension Spigot for compatibility) using provided hardware. Compatible Atlas Bipod models listed below.It will also bolt directly to our BT56LD 1/4-20 Lever Adapter.The BTC-Pro Bipod Clamp is CNC machined from 6061-T651 aluminum. Includes two (2) 10-32 x 3/8 flat-head screws and (1) 1/8" hex-key. Made in the USA.This clamp is manufactured by Really Right Stuff, SOAR Division NOT by B&T Industries, LLC. All warranty issues are to be processed through Really Right Stuff.
- The BT63 Nose Rail fulfills the desire to get bipods further forward and closer to the bore. Inspired to raise the bipod’s Apex, the “Nose Rail” is designed to be bedded into a channel in the stock with threaded holes for attaching a second rail or sling studs to the bottom of stock.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. NO HARDWARE INCLUDED. Available in black only.
- Overall Length: 7.0"
- Picatinny Rail Section Length: 2.0"
- Center-to-center Hole Spacing: 3" and 3.75"
- Weight: 2.6 ounces
- The BT73 M-LOK® Rail is designed for use with all M-LOK compatible hand guards, forends and buttstocks. It has 3 usable slots for attaching any of our 1913 Picatinny rail mounted Atlas Bipods, Accu-Shot Monopods or Folding Foregrip. It requires standard M-LOK sized slots for mounting.Machined from 6061-T6 aluminum and Type III hard coat anodized. It comes with two 10-24 x 3/8 fasteners and two M-LOK nuts. Available in black only.
- Length: 1.575"
- Width: 0.835"
- Weight: 0.59 oz
For a direct M-LOK to "NC" (No Clamp) Atlas Bipod interface, check out our BT70: Atlas M-LOK® Adapter - The BT80 M-LOK® Flush Cup Rail is designed for use with all M-LOK® compatible hand guards, forends and buttstocks. It has 5 usable slots and a flush cup allowing the use of Flush Cup sling swivels and sling studs (neither provided). The BT80 can be used to attach any of our 1913 Picatinny rail mounted Atlas Bipods, Accu-Shot Monopods or Folding Foregrip. It requires standard M-LOK® sized slots for mounting.Machined from 6061-T6 aluminum and Type III hard coat anodized. It comes with two 10-24 x 3/8 fasteners and two M-LOK® nuts. Available in black only.
- Length: 2.875"
- Center-to-center: 1.575"
- Width: 0.835"
- Weight: 1.038 oz
- The BT79 Barrett® M107A1® Rail is a 5-slotted 1913 Picatinny rail for direct installation to the Barrett® M107A1® providing the means to mount our Atlas Bipod Picatinny rail mounted bipods. It is also compatible with the Barrett® M82A1®.The center-to-center hole spacing of 3.359" fits the outer two holes of the existing three holes in the chassis. We strongly suggest that you measure the hole spacing on your rifle.The center section is machined to Picatinny rail standards from 4140 cold finished steel with a maganese phosphate finish. Two 3/8-16 x 3/4” flat head cap screws are provided.The original 11/16" nuts and tooth lock washers are reused to complete assembly. An 11/16" socket and ratchet wrench OR break-over bar and a 7/32” hex wrench is required for installation (none included). Check out installation instruction below. No modification needed.
- Overall Length: 4.309"
- Weight: 5.22 ounces
- Sale!The BT01-QK is our standard height Sling Stud Mount with QK01 Quick Knob. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
- Elevation Range: 3.50 – 4.65"
- Folded Length: 3.65" approximate
- Weight: 6.5 ounces
- Sale!The BT04-QK is our standard height Sling Stud Mount with QK01 Quick Knob. Additional Thumbnut installed to LOCK the unit into a fixed elevation. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
- Elevation Range: 3.75 – 4.85”
- Folded Length: 3.95"
- Weight: 7.3 ounces
- Sale!The BT05-QK is our mid-height Sling Stud Mount with QK02 Quick Knob. Additional Thumbnut installed to LOCK the unit into a fixed elevation. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
- Elevation Range: 4.80 – 5.85"
- Folded Length: 4.95" approximate
- Weight: 8.2 ounces
- Sale!The BT06-QK is our extended height Sling Stud Mount with QK03 Quick Knob. Additional Thumbnut installed to LOCK the unit into a fixed elevation. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
- Elevation Range: 5.70 – 6.85”
- Folded Length: 5.95" approximate
- Weight: 9.0 ounces
- Sale!The BT57-QK Accu-Shot Accuracy International AT (ASAIAT) Monopod is designed specifically to fit the Accuracy International Accuracy Tactical Rifle (AT) and Accuracy Tactical Accuracy International Chassis Systems (ATAICS). Also Known as the Gen. 2 stocks.It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
- Elevation Range: 3.00 - 4.15”
- Folded Length: 4.10" approximate
- Weight: 8.5 ounces
- Sale!The BT15 - 3.35" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 1.76 – 2.78" and a relieved back to accommodate curved surfaces.A standard sling stud and sling stud spacer can be used as one fastener or two button head machine screws can be used. NO HARDWARE INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks. Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.Weight: 0.92 ounces
- Sale!The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces.A standard sling stud and sling stud spacer or two button head machine screws can be used as a fastener. NO HARDWARE INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks. Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.Weight: 1.20 ounces
- Sale!The BT20B Atlas Accuracy International Spigot Bottom Rail is the same rail found in the BT20, but consists of the bottom 1913 rail ONLY. It attaches to the BT19 AAIS on the bottom and accepts any rail mounted bipod. It will also attach to many ARCA rail adaptors currently on the market with the same two hole pattern of 1.100” to the ARCA rail and accept any rail mounted bipod.It is the same rail found on our BT21 TRG Bracket and BT43 Leveraged Rail. It will also attach to the ARCALOCK Clamp.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. NO HARDWARE INCLUDED. Available in black only.
- Length: 1.60"
- Weight: 0.57 ounces
- Sale!The BT28 AFAR Rail Kit will mount into accessory rails and provide a low profile 1913 Picitinny rail for attaching the Atlas Bipods or other accessories. This is a great option for shooters that have accessory rails and want to use their rail mounted Atlas on several rifles.The uniquely designed rectangle nuts (BT28-N) fit both Freeland and Anschutz style rails by rotating them 90°.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish with 4041 Alloy Steel fasteners. Includes two rectangle nuts, two (2) 10-32 x 3/8″ flat head socket cap screws and two (2) 10-32 x 1/2″ flat head socket cap screws. Available in black only.
- Length: 2.05"
- Weight: 0.89 ounces
- Sale!The BT33 Tube Rail Kit consists of a Steel Bar Nut, designed to fit inside free float tubes, and a low profile 1913 Picatinny rail 2.05" long with a 1.00" radius back and a center-to-center spacing of 1.602 between the holes.The BT33 is installed with the Steel Bar Nut inside the free float tube and the 1913 Picatinny rail on the outside with the matching holes aligned. Fastened together, they allow the attaching of the Atlas Bipod or other accessories to free float tubes.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Manganese phosphate finish on the steel bar nut. Hardware included. Available in black only.
- Length: 2.05"
- Weight: 1.3 ounces
- Sale!The BT34 - 2.05" 1913 Picatinny Rail has a center to center spacing of 1.6". Two machine screws can be used not included, see BT1517) to attach this rail to the forearm of standard rifle stocks. It can also be attached to a horizontal surface on the Butt section to attach our Precision Rail Monopods.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. NO HARDWARE INCLUDED. Available in black only.Weight: 0.4 ounces
- Sale!The BT49 - 2.05" 1913 Adjustable Picatinny Rail has a center-to-center spacing of 1.2 - 1.6". Two machine screws can be used (not included, see BT1517) to attach this rail to the forearm of standard rifle stocks. Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish.The BT49 can also be attached to a horizontal surface on the Butt section to attach our Precision Rail Monopods. Available in black only.
- Length: 2.05"
- Weight: 0.4 ounces
- Sale!The BT51 ACE bracket was designed for the popular A.C.E. Skeleton Stock and provides the means to attach an Accu-Shot PRM style monopod (BT12-QK, BT13-QK and BT31-QK) to your A.C.E. Skeleton Stock. It is machined from 6061-T6 aluminum Mil-Spec Type III hard anodized. Besides the Picatinny rail for the PRM, the BT51 has two flush cups for attaching slings. The two piece bracket is clamped to the angular tube and is held in place with the four supplied SHCS fasteners. No modification is required. A 5/32 hex wrench is required but NOT included. Available in black only.Weight: 2.9 ouncesDesigned, Engineered, Machined & Assembled in America.
- The BT01-QK is our standard height Sling Stud Mount Accu-Shot Monopod. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Includes one 3/32” Allen wrench to aid in proper installation. Available in black only.
- Elevation Range: 3.50 – 4.65"
- Folded Length: 3.65" approximate
- Weight: 6.5 ounces
- The BT07 Tac-Cap is an optional steel cap that replaces the standard plastic cap found at the bottom of the monopod knob. It can damage soft surfaces and is intended for units that will experience hard surface use.Installation of the BT07 is friction-fit and requires no tools. However, we recommend permanently setting the BT07 and will do so at no additional charge when ordered along with any Accu-Shot Monopod, unless otherwise specified in the "comments" section. Available in black only.Weight: 0.35 ounces
- The BT03 M1-A/AR-15 Sling Stud Accessory replaces the standard Sling Loop found on many standard military style rifle stocks including the AR10, AR15 and M1A. Machined steel. Available in black only.Weight: 0.3 ounces
- The BT04-QK is our standard height Sling Stud Mount. Additional Thumbnut installed to LOCK the unit into a fixed elevation. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Includes one 3/32” Allen wrench to aid in proper installation. Available in black only.
- Elevation Range: 3.75 – 4.85”
- Folded Length: 3.95"
- Weight: 7.3 ounces
- The BT05-QK is our mid-height Sling Stud Mount. Additional Thumbnut installed to LOCK the unit into a fixed elevation. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Includes one 3/32” Allen wrench to aid in proper installation.Available in black only.
- Elevation Range: 4.80 – 5.85"
- Folded Length: 4.95" approximate
- Weight: 8.2 ounces
- The BT06-QK is our extended height Sling Stud Mount. Additional Thumbnut installed to LOCK the unit into a fixed elevation. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Includes one 3/32” Allen wrench to aid in proper installation. Available in black only.
- Elevation Range: 5.70 – 6.85”
- Folded Length: 5.95" approximate
- Weight: 9.0 ounces
- B&T Industries L.L.C. is proud to offer our Bitter & Twisted Mortar model display. The mortar model is constructed from turned and stamped Stainless Steel and quarter sawn American White Oak.The Mortar Barrel and Pinions are turned from 303 stainless steel bar stock with bored trunnion pockets. The trunnions are pressed into the pockets then welded in place. They rest on a pair of stainless steel bearing plates in the Mortar model Base and is retained by a pair of Stainless Steel Top Straps via two ¼-20 Stainless Steel Button Head cap screws per strap. They pass through the straps then into the side and thread into the Stainless Steel handle found on each Side of the Base. Strength is obtained and secured by steel on steel threads.
- B&T Industries L.L.C. is proud to create a letter opener for our customers that want to have a serious desktop accoutrement with purpose and function. We machined the Handle and Pommel from 300 series Stainless Steel then tumbled to compliment the blade. The blade, made by Spartan Blades, is machined from 440C Stainless Steel given a Rockwell Hardness of C 58-59 with a Cyro treatment followed by Alumina then Ceramic Blast and finally a PVD Chromium coating.The two Buna o-rings prevent rattling when sheathed for a stealthy presentation. The double ground edges along the length of the blade are not sharp, but the point is sharp. More specification and details below.
- The Groupy measures groups within a 1.5” diameter. Measurements are laser cut into acrylic with a glow-in-the-dark cord attached.Shoot three to five shots. Lay Groupy over shot group. Adjust until one of the circles cross the center of the two outer most holes. Read measurement on that circle to determine group size.
- The B&T Counter Mats are 11" x 17" with round corners. Each are hard top laminated with .125" mouse pad backer and features line art of the PSR Atlas Bipod and B&T logo.
- The “We Support Diplomacy” shirt features a rifle of our design being supported by our Accu-Shot PRM Monopod and PSR Atlas Bipod with Spiked Cleated Feet. Text reads, "We Support Diplomacy” with “the last 600 yards of” in a smaller font between “Support” and “Diplomacy”.Artwork and text are white printed onto a navy Gildan 100% cotton T-shirt. The front has a “B&T” circle logo on the front chest with “Bitter & Twisted” below.
- Grey Gildan 100% cotton T-shirt with “B&T” circle logo on the front chest with “Bitter & Twisted” below. On the back is the image seen with the following phrase in both English and Chinese:
We just want to make sure the thieves know…Atlas Precision Bipods® & Accu-Shot Precision Monopods® registered trademark patent owner is B&T Industries L.L.C...All B&T products are made in the USA and we are proud of it.
- Mint Green Gildan 100% cotton T-shirt with “B&T” circle logo on the front chest with “Bitter & Twisted” below. On the back is artwork featuring a single daisy flower and line art of a rifle in our design with our BT46-LW17 PSR Atlas Bipod and BT74 Raider Cleat feet and a BT12-QK Accu-Shot Monopod installed with the words "Daisy If You Do." Image and words are in yellow ink. Original artwork.
- The front of the “Support in Retro” shirt features a rifle of our design supported by our PSR Atlas Bipod with the new Atlas Raider Cleat Feet and B&T logo. The back features the buttstock from the same rifle supported by our Accu-Shot PRM Monopod.Artwork and text are yellow printed onto a navy, Gildan 2400 Ultra Cotton long sleeve shirt.
- The BT10 V8 Atlas Bipod mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only.Selected for SOCOM MK14 MOD 2. NSN 1005-01-601-0007 (for complete system)
- Height Range: 4.8 - 9.1" (6.3” at 90°)
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- Position Button 0.36" diameter
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Weight: 11.0 ounces approx.
- Footprint: 8–11"
- The BT10-NC V8 Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount such as the ADM-170-S, ARMS 17S, LT271 or any ARCA dovetail mount with the same hole pattern. *See below for mount compatibility specifications.The BT10-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Includes two 10-32 x 3/8" flathead socket screws. Available in black only.
- Height Range: 5 - 9.4" (6.5” at 90°)
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- Position Button 0.36" diameter
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Weight: 10.8 ounces approx.
- Footprint: 8–11"
- The BT10-LW17 V8 Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only.NSN 1005-01-623-6257
- Height Range: 5.2 - 9.6" (6.8” at 90°)
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- Position Button 0.36" diameter
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Weight: 12.7 ounces approx.
- Footprint: 8–11"
- The “Peace Symbol” bumper sticker is a great way to share your thoughts with friends and family! We thank the fine folks at Black Hills Ammo for allowing us to use their idea in our own unique way.Quantity 5Dimensions: 9.25 x 2.625”Made in America.
- The BT12-QK is our standard height Precision Rail Monopod (PRM) with QK01 Quick Knob. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only. NSN 1005-01-678-1553
- Elevation Range: 3.75 – 4.65”
- Folded Length: 3.85" approximate
- Weight: 7.4 ounces
- The BT13-Qk is our mid-height Precision Rail Monopod (PRM) with QK02 Quick Knob. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
- Elevation Range: 4.75 – 5.65”
- Folded Length: 4.80" approximate
- Weight: 8.3 ounces
- The BT26 CAR Adaptor installed on your CAR collapsible stock allows any of our Precision Rail Monopod style monopods to be installed. This is a great option for shooters that want the LOP adjustments available with a collapsible stocks, but want the stability provided by the Accu-Shot. The BT26 replaces the factory loop on the stock while providing the means to re-attach the fixed sling loop with the loop on the left, right or bottom angled forward or backward. It is made of 1018 Cold Rolled Steel and treated with magnesium phosphate. Available in black only.Weight: 1.1 ounce
- The BT56 LD 1/4-20 Adapter is a mounting solution to interface between a Tripod or similar supporting device (shooting/walking/camera stick type monopod) with a standard ¼-20 threaded stud and a firearm.Once the BT56 is installed on your supporting device using the ¼-20 threaded hole found on the BT56, the other side will accept ant 17S size Picatinny lever or ARCA mount with the matching two hole pattern of 1.100” and 10/32 threaded holes. After completed with a mount or your choice, your Picatinny or ARCA rail equipped Rifle, Pistol or Shotgun can be quickly mounted and held to your supporting device.This is a great option for getting added support for hunting and tactical situations where a bipod is not practical. The BT56 LD will hold your supporting device to the firearm for transitioning or relocation of firearm.It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. No hardware included. Available in black only.The Picatinny Rail lever mount is NOT included. However, the BT56 LD and ADM-170-S can be ordered together as our BT56 LD-L. Other compatible options we currently offer are Area 419's ARCALOCK Clamp and Arisaka's Picatinny Rail Slider.Weight: 0.8 ounces
- The BT56 LD-L 1/4-20 Lever Adapter is a Picatinny Rail mounting solution to interface between a Tripod or similar supporting device (shooting/walking/camera stick type monopod) with a standard ¼-20 threaded stud and a firearm with Picatinny Rail.Once the BT56 LD-L is installed on your supporting device using the ¼-20 threaded hole, your Picatinny Rail equipped Rifle, Pistol or Shotgun can be quickly mounted and held to your supporting device.This is a great option for getting added support for hunting and tactical situations where a bipod is not practical. The BT56 LD-L will hold your supporting device to the firearm for transitioning or relocation of firearm.It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. No hardware included. Available in black only.To order the without the installed ADM-170-S, view the BT56 LD 1/4-20 AdapterWeight: 2.7 ounces
- The BT66 Atlas 5-H and Super CAL BAS Ski Feet were developed from listening to customer feedback. Starting with 3.5" 6061-T6 bar stock, these monsters are made to slide in both the 90 and 45 degree leg positions. They are easily installed with the press of a stainless steel plunger to the 5-H and Super CAL models of Atlas Bipod. Sold as a pair.Weight: 6.16 ouncesProduct will work on 5-H and Super CAL models only.
- The BT75 Atlas 5-H & Super CAL Raider Cleat Feet are turned from 416 Stainless Steel bar stock in one piece for strength and durability. They will fit 5-H and Super CAL model Atlas Bipods. Easily installed with the press of a stainless steel plunger.The Cleat portion is approximately 1.225” long with the largest outer diameter of approximately 1.443”. Sold as a pair. Available in raw stainless steel only.NSN 1005-01-708-8219Total Weight of Pair: 4.76 ouncesProduct will work on 5-H and Super CAL models only.
- The BT31-QK is our extended height Precision Rail Monopod (PRM) with QK03 Quick Knob. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
- Elevation Range: 5.65 – 6.60"
- Folded Length: 5.80" approximate
- Weight: 9.0 ounces
- The BT08-QK ASAI Monopod is designed specifically to fit the Accuracy International AE, AW and AICS systems for the original “Legacy” AI style stock sides that have a thumb hole in the buttstock hook. It folds out of the way when not in use.The Knob is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. The Base is 4140 Steel treated with Manganese Phosphate. Includes one M6 x 80 x 80 bolt. Available in black only.
- Elevation Range: 3.60 – 4.55”
- Folded Length: 4.10"
- Weight: 10 ounces
- Customers with the Accuracy International “Gen 2” style stock sides (without the hole on buttstock hook), please see our BT57-QK.
- Customers that already have the BT08 and wish to mate it to the newer Accuracy International “Gen 2” style stocksides, please see our BT39.
- The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount such as the ADM-170-S, ARMS 17S, LT271 or any ARCA dovetail mount with the same hole pattern. *See below for mount compatibility specifications.The BT46-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Includes two 10-32 x 3/8" flathead socket screws. Available in black only.The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR).
- Height Range: 5 - 9.4" (6.5” at 90°)
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- Position Button 0.5" diameter
- Fore and Aft pivot limiting Bosses
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 11.42 ounces approx.
- Footprint: 8–11"
