- Sale!The BT34 - 2.05" 1913 Picatinny Rail has a center to center spacing of 1.6". Two machine screws can be used not included, see BT1517) to attach this rail to the forearm of standard rifle stocks. It can also be attached to a horizontal surface on the Butt section to attach our Precision Rail Monopods.Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. NO HARDWARE INCLUDED. Available in black only.Weight: 0.4 ounces
- Since B&T Industries introduced the Atlas Bipod in 2006, the shooting community found a usefulness in its patented, novel features. We began receiving requests for a "bigger," "heavier," "stouter" bipod with the same features. The BT35-LW17 5-H Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-5-H Lever. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Available in black only.
- Height Range: 5 - 10.2" (6.9” at 90°)
- Pan: 30 degrees
- Cant: 30 degrees
- Pan and Cant can be locked out at top dead center
- Pan and Cant Tension Wheel has Detent adjustability and Cam-Lock
- Position Button 0.5" diameter
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Weight: 27.52 ounces approx.
- Footprint: 14.5–19.5"
- Sale!The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, LT271 or any ARCA dovetail mount with the same hole pattern. The BT46-NC will also mount directly our BT19 AI Spigot or BT70 M-LOK® Adapter.It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Includes two 10-32 x 3/8" flathead socket screws. Available in black only.The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR).
- Height Range: 5 - 9.4" (6.5” at 90°)
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- Position Button 0.5" diameter
- Fore and Aft pivot limiting Bosses
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 11.42 ounces approx.
- Footprint: 8–11"
- Sale!The BT47-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any Arca dovetail mount with the same hole pattern. The BT47-NC will also mount directly to our BT19 AI Spigot and BT70 M-LOK AdaptorIt is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR). Includes two 10-32 x 3/8" flathead socket screws. Available in black only.
- Height Range: 7.0 – 13.0" approximately
- Preloaded Pan: 15 degrees +/-
- Preloaded Cant: 15 degrees +/-
- 5 leg positions: 0, 45, 90, 135 and 180 degrees
- Fore and Aft pivot limiting Bosses
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 12.86 ounces
- Footprint: 10 – 14.5"
- Sale!The BT49 - 2.05" 1913 Adjustable Picatinny Rail has a center-to-center spacing of 1.2 - 1.6". Two machine screws can be used (not included, see BT1517) to attach this rail to the forearm of standard rifle stocks. Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish.The BT49 can also be attached to a horizontal surface on the Butt section to attach our Precision Rail Monopods. Available in black only.
- Length: 2.05"
- Weight: 0.4 ounces
- Sale!The BT51 ACE bracket was designed for the popular A.C.E. Skeleton Stock and provides the means to attach an Accu-Shot PRM style monopod (BT12-QK, BT13-QK and BT31-QK) to your A.C.E. Skeleton Stock. It is machined from 6061-T6 aluminum Mil-Spec Type III hard anodized. Besides the Picatinny rail for the PRM, the BT51 has two flush cups for attaching slings. The two piece bracket is clamped to the angular tube and is held in place with the four supplied SHCS fasteners. No modification is required. A 5/32 hex wrench is required but NOT included. Available in black only.Weight: 2.9 ouncesDesigned, Engineered, Machined & Assembled in America.
- Sale!The BT57-QK Accu-Shot Accuracy International AT (ASAIAT) Monopod is designed specifically to fit the Accuracy International Accuracy Tactical Rifle (AT) and Accuracy Tactical Accuracy International Chassis Systems (ATAICS). Also Known as the Gen. 2 stocks.It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
- Elevation Range: 3.00 - 4.15”
- Folded Length: 4.10" approximate
- Weight: 8.5 ounces
- Sale!
The BT66 Atlas 5-H BAS Ski Feet are another example of us learning how our products are used and what end users want in order to get more out of our products. Starting with 3.5" 6061-T6 bar stock, these monsters are made to slide in both the 90 and 45 degree leg positions. They are easily installed with the press of a stainless steel plunger to the 5-H model Atlas Bipod. Sold as a pair.
Weight: 6.16 ounces
Product will work on 5-H and Super CAL models only.
- The BT01-QK is our standard height Sling Stud Mount Accu-Shot Monopod. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Includes one 3/32” Allen wrench to aid in proper installation. Available in black only.
- Elevation Range: 3.50 – 4.65"
- Folded Length: 3.65" approximate
- Weight: 6.5 ounces
- The BT03 M1-A/AR-15 Sling Stud Accessory replaces the standard Sling Loop found on many standard military style rifle stocks including the AR10, AR15 and M1A. Machined steel. Available in black only.Weight: 0.3 ounces
- The BT04-QK is our standard height Sling Stud Mount. Additional Thumbnut installed to LOCK the unit into a fixed elevation. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Includes one 3/32” Allen wrench to aid in proper installation. Available in black only.
- Elevation Range: 3.75 – 4.85”
- Folded Length: 3.95"
- Weight: 7.3 ounces
- The BT05-QK is our mid-height Sling Stud Mount. Additional Thumbnut installed to LOCK the unit into a fixed elevation. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Includes one 3/32” Allen wrench to aid in proper installation.Available in black only.
- Elevation Range: 4.80 – 5.85"
- Folded Length: 4.95" approximate
- Weight: 8.2 ounces
- The BT06-QK is our extended height Sling Stud Mount. Additional Thumbnut installed to LOCK the unit into a fixed elevation. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Includes one 3/32” Allen wrench to aid in proper installation. Available in black only.
- Elevation Range: 5.70 – 6.85”
- Folded Length: 5.95" approximate
- Weight: 9.0 ounces
- The BT07 Tac-Cap is an optional steel cap that replaces the standard plastic cap found at the bottom of the monopod knob. It can damage soft surfaces and is intended for units that will experience hard surface use.Installation of the BT07 is friction-fit and requires no tools. However, we recommend permanently setting the BT07 and will do so at no additional charge when ordered along with any Accu-Shot Monopod, unless otherwise specified in the "comments" section. Available in black only.Weight: 0.35 ounces
- The BT08-QK ASAI Monopod is designed specifically to fit the Accuracy International AE, AW and AICS systems for the original “Legacy” AI style stock sides that have a thumb hole in the buttstock hook. It folds out of the way when not in use.The Knob is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. The Base is 4140 Steel treated with Manganese Phosphate. Includes one M6 x 80 x 80 bolt. Available in black only.
- Elevation Range: 3.60 – 4.55”
- Folded Length: 4.10"
- Weight: 10 ounces
- Customers with the Accuracy International “Gen 2” style stock sides (without the hole on buttstock hook), please see our BT57-QK.
- Customers that already have the BT08 and wish to mate it to the newer Accuracy International “Gen 2” style stocksides, please see our BT39.
- The M6 x 80 x 80 Replacement Bolt is the same bolt we send standard with both the BT08-QK Accu-Shot Accuracy International (ASAI) Monopod and BT57-QK Accu-Shot Accuracy International AT Monopod.Available as a replacement.If additional length of pull spacers are being used, see our BT0857-LB: M6 x 80 x 100 Long Bolt
- The M6 x 80 x 100 Long Bolt is compatible with both the BT08-QK Accu-Shot Accuracy International (ASAI) Monopod and BT57-QK Accu-Shot Accuracy International AT Monopod.It is required if additional length of pull spacers are used with Accuracy International buttstocks that our BT08-QK and BT57-QK are being installed on.If you are needing a replacement standard bolt, see our BT0857-B: M6 x 80 x 80 Replacement Bolt
- The BT10 V8 Atlas Bipod mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only.Selected for SOCOM MK14 MOD 2. NSN 1005-01-601-0007 (for complete system)
- Height Range: 4.8 - 9.1" (6.3” at 90°)
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- Position Button 0.36" diameter
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Weight: 11.0 ounces approx.
- Footprint: 8–11"
- The BT10-LW17 V8 Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only.NSN 1005-01-623-6257
- Height Range: 5.2 - 9.6" (6.8” at 90°)
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- Position Button 0.36" diameter
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Weight: 12.7 ounces approx.
- Footprint: 8–11"
- The BT10-NC V8 Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount such as the ADM-170-S, ARMS 17S, LT271 or any ARCA dovetail mount with the same hole pattern. *See below for mount compatibility specifications.The BT10-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Includes two 10-32 x 3/8" flathead socket screws. Available in black only.
- Height Range: 5 - 9.4" (6.5” at 90°)
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- Position Button 0.36" diameter
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Weight: 10.8 ounces approx.
- Footprint: 8–11"
- The “Peace Symbol” bumper sticker is a great way to share your thoughts with friends and family! We thank the fine folks at Black Hills Ammo for allowing us to use their idea in our own unique way.Quantity 5Dimensions: 9.25 x 2.625”Made in America.
- The BT12-QK is our standard height Precision Rail Monopod (PRM) with QK01 Quick Knob. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only. NSN 1005-01-678-1553
- Elevation Range: 3.75 – 4.65”
- Folded Length: 3.85" approximate
- Weight: 7.4 ounces
- The BT13-Qk is our mid-height Precision Rail Monopod (PRM) with QK02 Quick Knob. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
- Elevation Range: 4.75 – 5.65”
- Folded Length: 4.80" approximate
- Weight: 8.3 ounces
- The BT14 Magpul PRS Threaded Sling Studs replace one of the four Socket Button Head Cap Screws found on the Magpul Precision Rifle Stock (PRS) with a sling stud. The threaded straps that come standard with the PRS can be reversed giving a total of 8 choices for stud placement. Each BT14 comes with two Sling Studs having 10-24 threads and black polymer spacers.
- Overall Length: 1.625"
- Length of Threaded Portion: 0.625"
- Length of Shaft Overall: 1.25"
- Weight: 0.5 ounces
