Shop

Sale!

View Cart

Add to cart / Details

BLEMISHED BT46-NC PSR Atlas Bipod: Standard height No Clamp*
$246.46
The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, LT271 or any ARCA dovetail mount with the same hole pattern. The BT46-NC will also mount directly our BT19 AI Spigot or BT70 M-LOK® Adapter.It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Includes two 10-32 x 3/8" flathead socket screws. Available in black only.The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR).

Height Range: 5 - 9.4" (6.5” at 90°)

Preloaded Pan: 30 degrees

Preloaded Cant: 30 degrees

Position Button 0.5" diameter

Fore and Aft pivot limiting Bosses

5 leg positions: 0, 45, 90, 135 & 180 degrees

Non-Rotating Legs: outer leg does not rotate around inner leg

Larger, stronger inner legs

Weight: 11.42 ounces approx.

Footprint: 8–11"
Sale!

View Cart

Add to cart / Details

BLEMISHED BT10-NC V8 Atlas Bipod*
$195.46
The BT10-NC V8 Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any ARCA dovetail mount with the same hole pattern. The BT10-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Includes two 10-32 x 3/8" flathead socket screws. Available in black only.

Height Range: 5 - 9.4" (6.5” at 90°)

Preloaded Pan: 30 degrees

Preloaded Cant: 30 degrees

Position Button 0.36" diameter

5 leg positions: 0, 45, 90, 135 & 180 degrees

Weight: 10.8 ounces approx.

Footprint: 8–11"
*To make your Blemished BT10-NC a BT10-LW17, add an ADM-170-S Lever to your cart. They are not blemished and sold at full retail price. If added to your cart, we will install the lever onto the bipod in your cart unless otherwise specified in the "Comments" section.
Sale!

View Cart

Add to cart / Details

BLEMISHED BT10 V8 Atlas Bipod
$195.46
The BT10 V8 Atlas Bipod mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only.Selected for SOCOM MK14 MOD 2. NSN 1005-01-601-0007 (for complete system)

Height Range: 4.8 - 9.1" (6.3” at 90°)

Preloaded Pan: 30 degrees

Preloaded Cant: 30 degrees

Position Button 0.36" diameter

5 leg positions: 0, 45, 90, 135 & 180 degrees

Weight: 11.0 ounces approx.

Footprint: 8–11"
View Cart

Add to cart / Details

BT23: Atlas Ski Feet
$59.95
The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL series Atlas Bipod with the press of a stainless steel plunger. They will lay flat in the 90 degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod. They will also fit bipods/adapters that use Atlas feet. Sold as a pair. Available in black only. NSN 1005-01-640-8881Total Weight of Pair: 1.5 ounces
Product will work on V8, PSR and CAL models only.
View Cart

Select options / Details

BT6569ML / BT6569ML-NC: Atlas CAL Upgrade Mount
$34.95
The BT6569ML and BT6569ML-NC are current production CAL mounts that provide 63 degrees of Cant. Additional Cant is considered an upgrade (see illustrations to determine which mount you have).The additional degrees of Cant was requested by a member of the SOF community and longtime user of B&T products.Variation differences and compatibility detailed in description below.
View Cart

Add to cart / Details

BT22: Atlas Leg Extensions
$59.95
The BT22 Atlas Leg Extensions are easily installed to any V8, PSR or CAL series Atlas Bipod with the press of a stainless steel plunger. They provide an additional 3 inches of elevation and accept any of our optional V8, PSR or CAL feet. They will also fit bipods/adapters that use Atlas feet. Sold as a pair. Available in black only. NSN 1005-01-641-0369Total Weight of Pair: 1.8 ounces
Product will work on V8, PSR and CAL models only.
View Cart

Add to cart / Details

10-32 x 1.25″ Socket Cap Screw
$1.75
Sold as a single 10-32 x 1.25" Socket Cap Screw.Purchasing a quantity of two (2) 10-32 x 1.25" Socket Cap Screws would be ideal for use with any 2-screw clamp Atlas Bipod mounts (BT10, BT65, BT69, BT72). These are what we have used for contractual fulfillments.Purchasing a quantity of one (1) 10-32 x 1.25" Socket Cap Screw would be ideal for use with any Precision Rail Mount (PRM) Accu-Shot Monopod (BT12, BT13, BT31).
View Cart

Add to cart / Details

10-32 x 1.25″ Clamp Bolt – Flathead Fastener
$1.75
Sold as a single 10-32 x 1.25" Clamp Bolt - Flat Head Fastener. The material is 4140 Alloy Steel with a manganese phosphate finish.Purchasing a quantity of two (2) 10-32 x 1.25" Clamp Bolts - Flat Head Fasteners would be ideal for use with any 2-screw clamp Atlas Bipod mounts (BT10, BT65, BT69, BT72).Purchasing a quantity of one (1) 10-32 x 1.25" Clamp Bolt - Flat Head Fastener would be ideal for use with any Precision Rail Mount (PRM) Accu-Shot Monopod (BT12, BT13, BT31).We have also used 10-32 x 1.25" Socket Cap Screws for contractual fulfillments available.
View Cart

Add to cart / Details

10-32 x 3/8″ Flat Socket Screw
$1.75
Sold as a single 10-32 x 3/8" Flathead Socket Screw.These are the same screws that come installed on all "NC" (No Clamp) models of Atlas Bipods.
View Cart

Add to cart / Details

BT54: Flushcup Stud
$19.95
The BT54 Flushcup Stud is a novel means to quickly install, move or remove accessories to a Picatinny rail, IF the accessory has a corresponding flushcup hole that aligns with the slots of the Picatinny rail. The BT54 was conceived and designed for use with our BT53 SILO. Available in black only.Weight: 1.0 ounce
View Cart

Add to cart / Details

BT53: SILO
$99.95
The BT53 SILO is a novel and patented product that attaches by means of a Picatinny rail. It provides a textured front that can be pressed into barricades, rubber side bars for “soft” side bracing and grip, 600 denier cordura "bean-bag" bottom for “soft” interface on ledges, windows etc. and two flush cups.One of the two flush cups is designed to accept our novel BT54 Flush Cup Stud (NOT included with purchase of a BT53). It is an option sold separately that allows the BT53 SILO to be easily installed, moved and removed with the push of a button.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized.

Length Approx: 3.75"

Width Approx: 2.36"

Height Approx: 1.78"

Weight: 7.8 ounces
View Cart

Add to cart / Details

Gen. 2 BT27: Folding Foregrip
$104.95
When a member of a government agency asked us why the BT27 did not offer a 45 degree position, we did not have an answer. Now it does! The newly redesigned BT27 Folding Foregrip offers two opposing flat surfaces to secure light switches with the installed Buna O-Rings. Removing the bottom cap reveals a storage compartment designed to hold a single 123 battery. The unique design protects the battery from being drained by placing the positive side (+) towards the relieved cap. We also trimmed the handle to decrease weight while maintaining battery storage and touch pad retainers. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.

Deployed Length: 4.073"

Folded Length: 4.032"

Weight: 5.2 ounces
View Cart

Add to cart / Details

BT82: Sticker Support Pack
$5.95
Each pack contains six custom designs. Stickers are screen printed UV vinyl and can be used indoors or outdoors.
View Cart

Add to cart / Details

BT83: B&T Microfiber Towel
$9.95
The BT83 B&T Microfiber Towel measures approximately 15 X 15" made from terry-style microfiber material. It features our B&T Logo measuring approximately 3" screen printed in the corner.Great all-purpose cleaning and dusting towels. Made for repeat use through multiple machine washes.Made in China. Screen printed in Wichita, KS, USA
View Cart

Add to cart / Details

BT81: Lil’ Brandi
$54.95
The BT81 Lil’ Brandi is our long awaited answer to getting a 1913 Picatinny Rail mounted on a traditional rifle stock without taking the rifle apart, drilling holes or damaging the stock. Installation utilizes the existing sling stud and provided cross pin, set screw and hex wrench.It features 3 usable slots for attaching any rail mounted Atlas Bipod and a sling attachment to utilize a sling if desired. The angular wings with rubber pads contact the stock. Machined to Picatinny rail standards from 7075-T6 aluminum with Mil-Spec Type III Class 2 finish. No disassembly required. Patent Pending.Not intended for use with flat stocks (reference fourth and fifth image). If the stock has two sling studs, we strongly recommend using our BT15 or BT17

Dimensions: 1.95 x 1.5 x 0.663 in

Weight: 0.89 ounces
View Cart

Add to cart / Details

Gen. 1 BT27: Folding Foregrip
$61.72
CLOSEOUT SALE. Limited availability.The Gen. 1 BT27 Folding Foregrip offers two opposing flat surfaces to secure light switches with the installed Buna O-Rings. Removing the bottom cap will reveal a storage compartment designed to hold a single 123 battery. The unique design protects the battery from being drained by placing the positive side (+) towards the relieved cap.When folded, the profile is reduced for a cleaner presentation for lower rifle positions as well as reducing the stop or snag point found with fixed vertical fore-grips. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.

Deployed Length: 4.15”

Folded Length: 4.3”

Weight: 7.3 ounces