- B&T Industries L.L.C. is proud to offer our Bitter & Twisted Mortar model display. The mortar model is constructed from turned and stamped Stainless Steel and quarter sawn American White Oak.The Mortar Barrel and Pinions are turned from 303 stainless steel bar stock with bored trunnion pockets. The trunnions are pressed into the pockets then welded in place. They rest on a pair of stainless steel bearing plates in the Mortar model Base and is retained by a pair of Stainless Steel Top Straps via two ¼-20 Stainless Steel Button Head cap screws per strap. They pass through the straps then into the side and thread into the Stainless Steel handle found on each Side of the Base. Strength is obtained and secured by steel on steel threads.
- For anyone that wishes to apply a finish to a currently owned B&T Accu-Shot Monopod:When applying an aftermarket finish that requires the use of heat or disassembly to any B&T Accu-Shot Monopod, we respectfully ask that you send that product to us so we can properly disassemble and return all appropriate parts to you for application of the finish.Once the finish is applied and the parts are returned to B&T, we will reassemble them to our specifications and ship it back to you. Please ensure parts are packaged appropriately to avoid any damage in transit. B&T will not be responsible for the finish or any damage to the finish.Anyone that disassembles, loses, breaks parts in an attempt to disassemble or cannot reassemble their Accu-Shot Monopod will be charged $75.00 plus parts minimum.Anyone choosing not to use this service does so at their own risk and liability voiding the monopod's Lifetime Warranty.B&T Industries L.L.C. does not sell or ship replacement parts.
Ships unassembled for coating.
The BT57-QK Accu-Shot Accuracy International AT (ASAIAT) Monopod is designed specifically to fit the Accuracy International Accuracy Tactical Rifle (AT) and Accuracy Tactical Accuracy International Chassis Systems (ATAICS). Also Known as the Gen. 2 stocks. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized.- Elevation Range: 3.00 - 4.15”
- Folded Length: 4.10" approximate
- Weight: 8.5 ounces
Ships unassembled for coating.
The BT01-QK is our standard height Sling Stud Mount with QK01 Quick Knob. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized.- Elevation Range: 3.50 – 4.65"
- Folded Length: 3.65" approximate
- Weight: 6.5 ounces
Ships unassembled for coating.
The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature.The BT65 mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. We chose to support a legend in the shooting sports by using the original KMW “Pod-Loc®.”- Height Range: 4.75–9.0"
- Cant: 45 degrees
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 12.87 ounces
- Footprint: 9–12.5"
Ships unassembled for coating.
Since B&T Industries introduced the Atlas Bipod in 2006, the shooting community found a usefulness in its patented, novel features. We began receiving requests for a "bigger," "heavier," "stouter" bipod with the same features. The BT35-LW17 5-H Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-5-H Lever. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components.- Height Range: 5.5–10.5"
- Pan: 30 degrees
- Cant: 30 degrees
- Pan and Cant can be locked out at top dead center
- Pan and Cant Tension Wheel has Detent adjustability and Cam-Lock
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Weight: 27.52 ounces approx.
- Footprint: 14.5–19.5"
- Sand Gildan 100% cotton T-shirt with line art on the back of a SF sniper in Fallujah with text, “Converting terrorist one bullet at a time.” Features 3” round US Snipers logo on front left chest. Line art measures about 14” wide and created by a young lady free hand from a photo supplied by a member of the Special Forces.
Ships unassembled for coating.
The BT72 Super CAL (Cant And Loc) Atlas Bipod does not PAN. This model mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly. Includes patented 45° leg positions, non-rotating legs, optional quick change feet and “Hold What You Move Technology®.”It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and has heat treated stainless steel components. We choose to support a legend in the shooting sports by using the original KMW “Pod-Loc®.” Read how to adjust the Pod-Loc® lever below.- Height Range: 5.75-10.87" (7.46” at 90°)
- Cant: 45 degrees
- Position Button: 0.5" diameter
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Weight: 21.54 ounces
- Footprint: 14.75-19.37"
Ships unassembled for coating.
The BT06-QK is our extended height Sling Stud Mount with QK03 Quick Knob. Additional Thumbnut installed to LOCK the unit into a fixed elevation. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized.- Elevation Range: 5.70 – 6.85”
- Folded Length: 5.95" approximate
- Weight: 9.0 ounces
Ships unassembled for coating.
The BT05-QK is our mid-height Sling Stud Mount with QK02 Quick Knob. Additional Thumbnut installed to LOCK the unit into a fixed elevation. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized.- Elevation Range: 4.80 – 5.85"
- Folded Length: 4.95" approximate
- Weight: 8.2 ounces
Ships unassembled for coating.
The BT04-QK is our standard height Sling Stud Mount with QK01 Quick Knob. Additional Thumbnut installed to LOCK the unit into a fixed elevation. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized.- Elevation Range: 3.75 – 4.85”
- Folded Length: 3.95"
- Weight: 7.3 ounces
Ships unassembled for coating.
The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature.The BT69 mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly. It is comprised of 6061-T6 aluminum, except the inner legs which are made from 7075-T6 aluminum, Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. We chose to support a legend in the shooting sports by using the original KMW “Pod-Loc®.”- Height Range: 6-12.25”
- Cant: 45 degrees
- 5 leg positions: 0, 45, 90, 135 & 180°
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 14.5 ounces
- Footprint: 9.25-16.5”
Ships unassembled for coating.
Since B&T Industries introduced the Atlas Bipod in 2006, the shooting community found a usefulness in its patented, novel features. We began receiving requests for a "bigger," "heavier," "stouter" bipod with the same features. The BT35-NC 5-H Atlas Bipod "No Clamp" has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires the 5-H ADM 4103LA74 Lever or any Arca dovetail mount with knob tensioner and same hole pattern. The BT35-NC will also mount to include our BT19 (AI) and BT21 (TRG) spigots. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components.- Height Range: 5.5–10.5"
- Pan: 30 degrees
- Cant: 30 degrees
- Pan and Cant can be locked out at top dead center
- Pan and Cant Tension Wheel has Detent adjustability and Cam-Lock
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Weight: 25.74 ounces approx.
- Footprint: 14.5–19.5"
Ships unassembled for coating.
The BT10-NC V8 Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any Arca dovetail mount with the same hole pattern. The BT10-NC will also mount directly to our BT19 (AI) and BT21 (TRG) spigots. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components.- Height Range: 5–9"
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Weight: 10.8 ounces approx.
- Footprint: 8–11"
Ships unassembled for coating.
The BT10 V8 Atlas Bipod mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Selected for SOCOM MK14 MOD 2. NSN 1005-01-601-000.- Height Range: 5–9"
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Weight: 11.0 ounces approx.
- Footprint: 8–11"
- Since B&T Industries introduced the Atlas Bipod in 2006, the shooting community found a usefulness in its patented, novel features. We began receiving requests for a "bigger," "heavier," "stouter" bipod with the same features. The BT35-LW17 5-H Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-5-H Lever. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Available in black only.
- Height Range: 5 - 10.2" (6.9” at 90°)
- Pan: 30 degrees
- Cant: 30 degrees
- Pan and Cant can be locked out at top dead center
- Pan and Cant Tension Wheel has Detent adjustability and Cam-Lock
- Position Button 0.5" diameter
- 5 leg positions: 0, 45, 90, 135 & 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Weight: 27.52 ounces approx.
- Footprint: 14.5–19.5"
