- Overall Length: 1.625"
- Length of Threaded Portion: 0.625"
- Length of Shaft Overall: 1.25"
- Weight: 0.5 ounces
- The BT14 Magpul PRS Threaded Sling Studs replace one of the four Socket Button Head Cap Screws found on the Magpul Precision Rifle Stock (PRS) with a sling stud. The threaded straps that come standard with the PRS can be reversed giving a total of 8 choices for stud placement. Each BT14 comes with two Sling Studs having 10-24 threads and black polymer spacers.
- The M6 x 80 x 100 Long Bolt is compatible with both the BT08-QK Accu-Shot Accuracy International (ASAI) Monopod and BT57-QK Accu-Shot Accuracy International AT Monopod.It is required if additional length of pull spacers are used with Accuracy International buttstocks that our BT08-QK and BT57-QK are being installed on.If you are needing a replacement standard bolt, see our BT0857-B: M6 x 80 x 80 Replacement Bolt
- The M6 x 80 x 80 Replacement Bolt is the same bolt we send standard with both the BT08-QK Accu-Shot Accuracy International (ASAI) Monopod and BT57-QK Accu-Shot Accuracy International AT Monopod.Available as a replacement.If additional length of pull spacers are being used, see our BT0857-LB: M6 x 80 x 100 Long Bolt
- The BT07 Tac-Cap is an optional steel cap that replaces the standard plastic cap found at the bottom of the monopod knob. It can damage soft surfaces and is intended for units that will experience hard surface use.Installation of the BT07 is friction-fit and requires no tools. However, we recommend permanently setting the BT07 and will do so at no additional charge when ordered along with any Accu-Shot Monopod, unless otherwise specified in the "comments" section. Available in black only.Weight: 0.35 ounces
- The BT03 M1-A/AR-15 Sling Stud Accessory replaces the standard Sling Loop found on many standard military style rifle stocks including the AR10, AR15 and M1A. Machined steel. Available in black only.Weight: 0.3 ounces
- "Make Picatinny Great Again with the Patent Pending Arisaka Rail Slider. It transforms the Picatinny rail on your rifle into a multi-position sliding mount with a push button recoil lug. A unique detented knob is used to set sliding tension, accounts for out-of-spec rails, allows the mount to be removed or installed without having to slide it off the end of the rail, and can be quickly and easily tightened down for maximum precision." - Arisaka, LLCThe Picatinny Rail Slider will bolt directly to any “NC” (No Clamp) style of Atlas Bipods (except the 5-H which requires Extension Spigot for compatibility) using provided hardware. Compatible Atlas Bipod models listed below.It will also bolt directly to our BT20-B Bottom Picatinny Rail and BT56LD 1/4-20 Lever Adapter.The Rail Slider is CNC machined from stainless steel and MIL-A-8625 Type III hard coat anodized 6061-T651 aluminum. Includes two (2) 10-32 x 5/16" socket cap screws. Requires a 5/32" allen wrench for installation (not included). Recommended torque: 30 inch lbs. Made in the USA.This clamp is manufactured by Arisaka, LLC NOT by B&T Industries, LLC. All warranty issues are to be processed through Arisaka.
- Weight: 2.2 oz
- The ARCALOCK Spigot Extension was designed for use with Area 419's ARCALOCK Clamp.Some ARMS17-S accessory with matching hole pattern of 1.100” such as American Defense's ADM-170-s, Arisaka's Picatinny Rail Slider or Really Right Stuff's BTC-Pro Bipod Clamp. However due to design, some clamps will NOT fit such as Magpul's QR Rail Grabber (MAG1196) and Really Right Stuff's SC-ARC Bipod Clamp.It is ideal to adapt our BT35-NC 5-H Atlas Bipod to an ARCA clamp for clearance of the cradle and operation of the clamp's knob. It will also extend all "NC" or No Clamp models (view complete list below) of Atlas Bipods out extra 1.25″ for increased stability. To use with your Bipod that already has a clamp, lever or mount installed, simply remove it to attach the spigot.This spigot is manufactured by Area 419 NOT by B&T Industries L.L.C. Includes two 10-32 x 3/8" flathead socket screws and two 10-32 x 5/8" flathead socket screws.
- Weight: 1.79 oz
- Dimensions: 3.2 × 1.24 × 0.35 in
- "Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction. If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure. Introducing the ARCALOCK Dovetail Rail System." - Area 419The ARCALOCK Clamp works on all standard ARCA/1.5" dovetail rails. It will bolt directly to any "NC" (No Clamp) style of Atlas Bipods (except the 5-H which requires Extension Spigot for compatibility). Compatible Atlas Bipod models listed below.It will also bolt directly to our BT20-B Bottom Picatinny Rail and BT56LD 1/4-20 Lever Adapter.The ARCALOCK Clamp features a proprietary two-stage screw design. Both the Clamp and Knob are machined from 6061-T6 Aluminum with Type III Hardcoat black anodized Clamp and Knob. The screw is turned from 303 stainless steel.This clamp is manufactured by Area 419 NOT by B&T Industries L.L.C. All warranty issues are to be processed through Area 419. NO HARDWARE INCLUDED.
- Weight: 2.5 oz
- The ADM-5-H Lever base is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems. It has two hole pattern of 1.100”. This lever is manufactured by American Defense Manufacturing and NOT by B&T Industries L.L.C. This custom made lever is made to work with the 5-H Atlas Bipod only.Weight: 1.89 ounces
- The ADM-170-S base is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems. It has two hole pattern of 1.100”.This lever is manufactured by American Defense MFG, LLC NOT by B&T Industries, LLC and is used on our V8, PSR, CAL and Super CAL models of Atlas Bipods. All warranty issues are to be processed through American Defense MFG, LLCWeight: 1.905 ounces
- Sold as a single 10-32 x 3/8" Flathead Socket Screw.These are the same screws that come installed on all "NC" (No Clamp) models of Atlas Bipods.
- Sold as a single 10-32 x 1.25" Socket Cap Screw.Purchasing a quantity of two (2) 10-32 x 1.25" Socket Cap Screws would be ideal for use with any 2-screw clamp Atlas Bipod mounts (BT10, BT65, BT69, BT72). These are what we have used for contractual fulfillments.Purchasing a quantity of one (1) 10-32 x 1.25" Socket Cap Screw would be ideal for use with any Precision Rail Mount (PRM) Accu-Shot Monopod (BT12, BT13, BT31).
- Sold as a single 10-32 x 1.25" Clamp Bolt - Flat Head Fastener. The material is 4140 Alloy Steel with a manganese phosphate finish.Purchasing a quantity of two (2) 10-32 x 1.25" Clamp Bolts - Flat Head Fasteners would be ideal for use with any 2-screw clamp Atlas Bipod mounts (BT10, BT65, BT69, BT72).Purchasing a quantity of one (1) 10-32 x 1.25" Clamp Bolt - Flat Head Fastener would be ideal for use with any Precision Rail Mount (PRM) Accu-Shot Monopod (BT12, BT13, BT31).We have also used 10-32 x 1.25" Socket Cap Screws for contractual fulfillments available.
